• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• Journal of Energy Engineering
• /
• v.28 no.2
• /
• pp.18-35
• /
• 2019

The Korea District Heating Corporation operates a gas engine generator with a capacity of $4500m^3 /day$ of biogas generated from the sewage treatment plant of the Nanji Water Recycling Center and 1,500 kW. However, the actual operation experience of the biogas power plant is insufficient, and due to lack of accumulated technology and know-how, frequent breakdown and stoppage of the gas engine causes a lot of economic loss. Therefore, it is necessary to prepare technical fundamental measures for stable operation of the power plant In this study, a series of process problems of the gas engine plant using the biogas generated in the sewage treatment plant of the Nanji Water Recovery Center were identified and the optimization of the actual operation was made by minimizing the problems in each step. In order to purify the gas, which is the main cause of the failure stop, the conditions for establishing the quality standard of the adsorption capacity of the activated carbon were established through the analysis of the components and the adsorption test for the active carbon being used at present. In addition, the system was applied to actual operation by applying standards for replacement cycle of activated carbon to minimize impurities, strengthening measurement period of hydrogen sulfide, localization of activated carbon, and strengthening and improving the operation standards of the plant. As a result, the operating performance of gas engine # 1 was increased by 530% and the operation of the second engine was increased by 250%. In addition, improvement of vent line equipment has reduced work process and increased normal operation time and operation rate. In terms of economic efficiency, it also showed a sales increase of KRW 77,000 / year. By applying the strengthening and improvement measures of operating standards, it is possible to reduce the stoppage of the biogas plant, increase the utilization rate, It is judged to be an operational plan.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.2
• /
• pp.220-228
• /
• 2007

The nutritive value and the effect of tannins on the utilization of foliage from three commonly used legumes, Acacia nilotica, Albizia procera, and Sesbania acculeata, were determined. Three mature rumen-fistulated bullocks were used to study in sacco degradability and twelve adult sheep were randomly allocated on the basis of live weight to 4 groups of 3 in each to study the in vivo digestibility of the foliages. In all foliages, the contents of crude protein (17 to 24% of DM) were high. Fibre was especially high in Albizia (NDF 58.8% of DM vs. 21% in Sesbania and 15.4% in Acacia). Contents of both hydrolysable (4.4 to 0.05%) and condensed tannins (1.2 to 0.04%) varied from medium to low in the foliages. Acacia contained the highest level of total phenolics (20.1%), protein precipitable phenolics (13.2%) and had the highest capacity to precipitate protein (14.7%). Drying in shade reduced the tannin content in Acacia and Albizia by 48.6 and 69.3% respectively. The foliages ranked similarly for each of the different methods used to estimate tannin content and activity. Acacia and Sesbania foliage was highly degradable (85-87% potential degradability of DM in sacco), compared to Albizia (52%), indicating a minimal effect of tannins in Acacia and Sesbania. Yet, in vitro, the tannins in the Acacia inhibited microbial activity more than those in Albizia and Sesbania. Following the addition of polyethylene glycol to neutralise the tannins, gas production and microbial growth increased by 59% and 0.09 mg RNA equiv./dg microbial yield respectively in the Acacia, compared to 16-17% and 0.06 mg RNA equiv./dg microbial yield in the other foliages. There was a trend for low in vivo apparent digestibility of N in the Acacia (43.2%) and Albizia (44.2%) compared to the Sesbania (54.5%) supplemented groups. This was likely to be due to presence of tannins. Consistent with this was the low N retention (0.22 and 0.19 g N/g NI) in sheep supplemented with Acacia and Albizia compared to that for the Sesbania (0.32). Similarly, a trend for poor microbial N yield was observed in sheep fed these foliages. Across the foliages tested, an increase in tannin content was associated with a reduction in ruminal fermentation, N digestibility and N retention. For overall nutritive value, Sesbania proved to be the superior forage of the three tested.

• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.565-577
• /
• 2016

The objective of this study is to propose a method for computing the Natural Drought Index (NDI) that does not consider man-made drought facilities. Principal Component Analysis (PCA) was used to estimate the NDI. Three monthly moving cumulative runoff, soil moisture and precipitation were selected as input data of the NDI during 1977~2012. Observed precipitation data was collected from KMA ASOS (Korea Meteorological Association Automatic Synoptic Observation System), while model-driven runoff and soil moisture from Variable Infiltration Capacity Model (VIC Model) were used. Time series analysis, drought characteristic analysis and spatial analysis were used to assess the utilization of NDI and compare with existing SPI, SRI and SSI. The NDI precisely reflected onset and termination of past drought events with mean absolute error of 0.85 in time series analysis. It explained well duration and inter-arrival time with 1.3 and 1.0 respectively in drought characteristic analysis. Also, the NDI reflected regional drought condition well in spatial analysis. The accuracy rank of drought onset, termination, duration and inter-arrival time was calculated by using NDI, SPI, SRI and SSI. The result showed that NDI is more precise than the others. The NDI overcomes the limitation of univariate drought indices and can be useful for drought analysis as representative measure of different types of drought such as meteorological, hydrological and agricultural droughts.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.4
• /
• pp.224-229
• /
• 2006

Utilization of organic by-product fertilizers has many beneficial effects on agricultural activities and in aspects of the disposal of enormous amounts of livestock manure. Most of these beneficial effects are related to the improvement of soil condition, such as fertility status and physicochemical quality of soil. But, appropriate indexes are needed to effectively manage the quality of organic by-product fertilizers amended on soil. To find chemical and physical standard to control the compost quality, the changes in chemical and physical characteristics of organic by-product fertilizers during composting were investigated, and also an appropriate physical method for this end. The results showed chemical properties, such as humic acid content, OM/N ratio, cation exchange capacity and salt content, had significant relationships during the composting. The water content, particle and bulk densities, particle size and color indices, as physical properties, were also applicable factors for the quality control of compost.

• Journal of Applied Biological Chemistry
• /
• v.55 no.3
• /
• pp.185-189
• /
• 2012

This study was conducted to investigate the effect of different steam condition and dehydration condition on physicochemical characteristics of Olbyeossal made from Waxy rice. All samples were steamed at $95-100^{\circ}C$ for 60 min or at $121^{\circ}C$ for 20 min and then were dehydrated using hot air 45, 60, $80^{\circ}C$ and sun-dried to achieve moisture contents 13-15%. Initial pasting temperature of Olbyeossal was the lower than that of nontreatment sample by parboiling. The combination in steaming $95-100^{\circ}C$ and hot drying at $45-60^{\circ}C$ was showed appropriate pasting properties compared with other condition. The hardness of Olbyeossal was significantly affected by steaming and dehydration condition. The hardness of Olbyeossal showed the higher value for steaming at $121^{\circ}C$ than $95-100^{\circ}C$. The water binding capacity (WBC) and swelling power (SP) were higher steaming at $121^{\circ}C$ than $95-100^{\circ}C$. No significant differences on WBC and SP of Olbyeossal by dehydration condition were observed. As the sensory evaluation results, the combination in steaming at $121^{\circ}C$ and hot-air drying at 45 or $80^{\circ}C$ led to increase preference for appearance, color, taste and overall acceptability. These results indicate that steaming and dehydration condition were affecting factor on physicochemical characteristics of Olbyeossal.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.4
• /
• pp.547-554
• /
• 2008

In performance, digestibility and slaughter trials, a total of forty five male weaned lambs were used to examine the effects of monensin and live yeast supplementations on growth performance, nutrient digestibility, carcass characteristics and ruminal fermentation parameters when the lambs were fed steam-flaked corn-based diets. Animals were allotted to one of three treatment diets in a completely randomized design. The three treatment diets were: (1) basal diet (CON) with steam-flaked corn as a sole grain source, (2) basal diet supplemented with monensin (MO), and (3) basal diet supplemented with live yeast (LY). Total average daily intake (ADI) was unaffected by MO and LY supplementations. LY supplementation increased (p<0.05) average daily gain (ADG) by 13.1% compared with the CON diet. Both MO and LY supplementations resulted in a significant improvement (p<0.05) of feed efficiency over the CON diet (4.47, 4.68 vs. 5.05). Hemicellulose digestibility was higher (p<0.05) for lambs in the LY supplementation group (62.4%) as compared with the CON group (55.7%), but no differences were observed in digestibilities of dry matter (DM), organic matter (OM), crude protein (CP), neutral detergent fiber (NDF) and acid detergent fiber (ADF). All carcass traits were not influenced by dietary supplementations. Ruminal pH in lambs fed the LY supplemental diet was more stable than that with the CON diet (6.57 vs. 6.17). Neither MO nor LY supplementation influenced the concentration of ruminal ammonia-N and total volatile fatty acid (VFA), and molar percentages of individual VFA. Plasma urea-N concentration was decreased (p<0.05) by MO and LY supplementations, while plasma ${\beta}$-hydroxybutyrate (BHBA), glucose and other blood parameters were unaffected. In conclusion, while both MO and LY supplementations had a positive impact on feed efficiency and LY supplementation stabilized ruminal pH and improved fiber utilization, none of the supplements had the capacity to significantly enhance the carcass characteristics.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.97-102
• /
• 2020

Recently, various degradation mechanisms of lithium secondary battery cathode materials have been revealed. As a result, many studies on overcoming the limitation of cathode materials and realizing new electrochemical properties by controlling the degradation mechanism have been reported. Li-rich layered oxide is one of the most promising cathode materials due to its high reversible capacity. However, the utilization of Li-rich layered oxide has been restricted, because it undergoes a unique atomic structure change during the cycle, in turn resulting in unwanted electrochemical degradations. To understand an atomic structure deterioration mechanism and suggest a research direction of Li-rich layered oxide, we deeply evaluated the atomic structure of 0.4Li₂MnO₃_0.6LiNi_1/3Co_1/3Mn_1/3O₂ Li-rich layered oxide during electrochemical cycles, by using an atomic-resolution analysis tool. During a charge process, Li-rich materials undergo a cation migration of transition metal ions from transition metal slab to lithium slab due to the structural instability from lithium vacancies. As a result, the partial structural degradation leads to discharge voltage drop, which is the biggest drawback of Li-rich materials.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.5
• /
• pp.887-892
• /
• 2015

Jerusalem artichoke is often stored poorly after harvesting due to its delicate skin. For this reason, Jerusalem artichoke is mainly distributed in the market as a dried material. In order to improve utilization of dried Jerusalem artichoke, we made Jangachi and analyzed physiochemical characteristics with raw Jerusalem artichoke Jangachi during storage. Raw Jerusalem artichoke was sliced into 7 and 10 mm slices and dried in hot air. After aging, we analyzed rehydration capacity, pH, hardness, salinity, sugar content, and fructan content of both. Dried Jerusalem artichoke sliced into 10 mm slices took over twice as long (420 min) to be rehydrated over 90% than 7 mm sliced (200 min) Jerusalem artichoke. In the case of raw Jerusalem artichoke, hardness showed a tendency to decline. Relatively, hardness of dried Jerusalem artichoke was measured consistently. After 4 weeks, salinity and sugar content were 3.63% and $41.23^{\circ}Brix$ in raw Jerusalem artichoke Jangachi, 3.47% and $37.05^{\circ}Brix$ in 7 mm dried Jerusalem artichoke, and 3.77% and $39.15^{\circ}Brix$ in 10 mm dried sample, respectively. As a result of this study, the possibility of dried Jerusalem artichoke as a pickle was confirmed.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.89-96
• /
• 2018

This study analyzed status and demand of participation in lifelong education for 218 residents of low-income class according to National Basic Livelihood Security Act. The results of the study are as follows. First, among the statuses of participation in lifelong education, the abilities to study of the low-income class were reviewed. They showed 95.3% of foreign language ability, 66.1% of ICT utilization capacity and 75.7% of computer literacy ability. And the lifelong education participation rate of low-income people was 75.7% It was considered as passive participation in education. Voluntary participation was identified and analyzed. The the actual participation rate in lifelong education was very low at 22.9%. Social participation and awareness according to participation in lifelong education was 43.3% higher than that of respondents who had no participation experience. Especially, voluntary participants showed 73.3% higher than those who did not participate. Second, as a result of analyzing lifelong education of low income class, 74.8% of the respondents answered that there is wished education program. And 50.0% of them could not participate because they did not have enough time. The programs that they wanted to participate in were the programs that could help their real lives such as home life, health and medical courses, professional qualification obtaining process, etc. This indicates that the income level plays a significant role in participation in lifelong education. As a result of analyzing the results of this study above, Korean lifelong education is emphasized and the participation rate is increasing rapidly. However, participation of low-income class in lifelong education seems low.