• Journal of Electrochemical Science and Technology
• /
• v.2 no.2
• /
• pp.97-102
• /
• 2011

Different amounts of excess lithium in the range of x = 0~0.3 were added to $Li_{1+x}[Mn_{0.720}Ni_{0.175}Co_{0.105}]O_2$ cathode materials synthesized using the co-precipitation method to investigate its microstructure and electrochemical properties. Pure layered structure without impurities was confirmed in the XRD pattern analysis and increasing peak intensity of $Li_2MnO_3$ was observed along with the addition of over 0.2 mol Li. The initial discharge capacity of the stoichiometric composition was determined to be 246 mAh/g, while the discharge capacity of the addition of 0.1 mol Li was obtained to be 241 mAh/g, which was not significantly different from that of the stoichiometric composition. However, the discharge capacities decreased dramatically after the addition of 0.2 and 0.3 mol Li to 162 mAh/g and 146 mAh/g, respectively. In the rate capability test, the active $Li_{1+x}[Mn_{0.720}Ni_{0.175}Co_{0.105}]O_2$ cathode material of the stoichiometric composition showed a dramatic decrease in its discharge capacity with increasing C-rate, as evidenced by the result that the discharge capacity at 5C was 13% compared with 0.1C. On the other hand, the discharge capacity of compositions containing excess lithium was improved at higher current rates. The cycling test showed that the composition containing an excess of 0.1 mol Li had the most outstanding capacity retention.

• Korean Management Science Review
• /
• v.29 no.3
• /
• pp.169-182
• /
• 2012

This study examines the co-evolutionary process between open innovation and firms' absorptive capacity. The effects of open innovation can be maximized through the capacity to absorb the knowledge from the external sources such as universities, government-support research institute, and private R&D centers. This study used data of STEPI technology innovation survey conducted at 2002, 2005, and 2008 (3 points measures). The data were analyzed through a structural equation model. Results suggest that open innovation at t0 point influences positively the absorptive capacity at t1 point, which subsequently enhances the intention of open innovation at t2 point. This result suggests the existence of co-evolutionary process between open innovation and firms' absorptive capacity. When knowledge comes from universities, the co-evolution has sustained; whereas when knowledge comes from private firms' R&D centers, the co-evolution has not effected. Theoretical and practical implications are discussed.

• Structural Engineering and Mechanics
• /
• v.24 no.1
• /
• pp.91-105
• /
• 2006

In this paper, post-earthquake capacity evaluation method of reinforced concrete buildings was studied. Substructure pseudo-dynamic test and static loading test of first story column in a four-story R/C building was carried out in order to investigate the validity of the evaluation method proposed in the Damage Assessment Guideline (JBDPA 2001). In pseudo-dynamic test, different levels of damage were induced in the specimens by pre-loading, and input levels of seismic motion, at which the specimens reached to the ultimate stage, were examined. From the experimental result, no significant difference in damage levels such as residual crack width between the specimens under static and pseudo-dynamic loading was found. It is shown that the seismic capacity reduction factors ${\eta}$ can provide a reasonable estimation of post-earthquake seismic capacity of R/C buildings suffered earthquakes.

• Journal of Korea Foundry Society
• /
• v.29 no.2
• /
• pp.59-63
• /
• 2009

Effects of Ti on damping capacity and mechanical properties are investigated in hot rolled Fe-17%Mn alloy. The existing damping alloy with Fe-Mn binary system was limited the use by high production cost, however in case of using scrap iron instead of pure iron although the content of carbon is higher it is possible to be applied wider field especially construction items because the production cost is lower. However, the excellent specific damping capacity is dropped due to the high content of carbon, we developed advanced type of damping alloy included Ti. TiC is formed with added Ti and it holds the specific damping capacity similar to existing damping alloy. The effect of Ti on damping capacity is found to be beneficial in carbon-containing alloy, which is attributed to the depletion of carbon solute due to the formation of TiC.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.2
• /
• pp.171-186
• /
• 1996

This paper comes from an observation that overemphasis on capacity utilization meausre, which is usual under capacity shortage, can seriously hurt the firm's profit and potential process improvement. We suggest a model that can be used in designing a coordination scheme for decentralized marketing and manufacturing activities. Using a price and time-sensitive demand and capacitated lotsizing model, we derive an effective communication medium betwen marketing and manufacturing. This Balance Indicator of process capacity and flexibility also implies that the increase in capacity availability and setup time reduction should be balanced by its market requirements. This is particularly important when a firm tries to improve its process capability by kaizen. Further, the model can be used to show the comparative performances of scheduling policies under capacity imbalnce. We show the shortening the scheduling cycle can improve the firm profit without changing the simple scheduling rule.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.175-181
• /
• 2010

The government have plans to improve the railway transport capacity and transport hub for the sustainable national transport and logistics system. Specially, there are much efforts to improve transportation capacity such as high speed transportation of rail freight, enlargement of BT train, development of double stack train, etc. between railway transport hubs. If the transport capacity between railway logistics hubs is increased as planned, we must increase the handling capacity of railway hub terminals. But there are limits to enlarge the terminal infrastructure because of investment scale, location circumstances and urban development plans. To ensure the capacity, with the minimum required enlargement of infrastructure, it is necessary to extremely increase the efficiency of terminal operations. For improving the efficiency, we have to introduce the efficient terminal operation systems based on u-IT and operation optimize technologies. In this paper, we analyse the issues and problems of railway terminals(including ICD) and suggest the concept of intelligent railway terminal and the construction components of technology.

• Korean Journal of Materials Research
• /
• v.24 no.1
• /
• pp.1-5
• /
• 2014

This study is experimentally investigated whether or not a relationship exists between the mechanical properties and damping capacity of cold-rolled 316 L stainless steel. Deformation-induced martensite was formed with surface relief and directionality. With the increasing degree of deformation, the volume fraction of ${\varepsilon}$-martensite increased, and then decreased, while ${\alpha}^{\prime}$-martensite increased rapidly. With an increasing degree of deformation, tensile strength was increased, and elongation was decreased; however, damping capacity was increased, and then decreased. Tensile strength and elongation were affected in the ${\alpha}^{\prime}$-martensite; hence, damping capacity was influenced greatly by ${\varepsilon}$-martensite. Thus, there was no proportional relationship between strength, elongation, and damping capacity.

• Journal of Distribution Science
• /
• v.20 no.12
• /
• pp.43-57
• /
• 2022

Purpose: This study discusses the phenomenon of the uncertain sustainability of SMEs in developing countries. SMEs face various challenges in the dynamics of a competitive environment, which threaten their growth and sustainability. This study aims to address a research gap between company's internal resources, in the form of absorptive capacity, and its business performance. By using product quality as a mediator, which has never been studied before, this research presents a novelty to answer the existing research gap using the Resource Based Theory (RBT) perspective. Research design, data and methodology: Using quantitative method, data are collected from 164 respondents, who are owners or managers of furniture manufacturing SMEs in Gerbangkertosusila Area, East Java, Indonesia. The data are analyzed using Partial Least Square (PLS) - Structural Equation Modeling (SEM). Results: The findings show that absorptive capacity has a direct and significant effect on business performance and indirectly through product quality. Conclusion: Furniture manufacturing SMEs are advised to focus on developing absorptive capacity reflected in good product quality, in order to improve their business performance. This is especially important to survive the crisis caused by the Covid-19 pandemic. Thus, the results of this study contribute to the development of RBT, and there are several suggestions for further research.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.620-624
• /
• 2003

LiCo$_{y}$Mn$_{2-y}$O$_4$ samples were synthesized by calcining a mixture of LiOH.$H_2O$, MnO$_2$ (CMD) and CoCO$_3$ calcining at 40$0^{\circ}C$ for 10 h and then calcining twice at 75$0^{\circ}C$ for 24 h in air with intermediate grinding. All the synthesized samples exhibited XRD patterns for the cubic spinel phase with a space group Fd(equation omitted)m. The electrochemical cells were charged and discharged for 30 cycles at a current density 600 $mutextrm{A}$/$\textrm{cm}^2$ between 3.5 and 4.3 V. As the value of y increases, the size of particles becomes more homogeneous. The first discharge capacity decreases as the value of y increases, its value for y=0.00 being 92.8 mAh/g. The LiMn$_2$O$_4$ exhibits much better cycling performance than that reported earlier. The cycling performance increases as the value of y increases. The efficiency of discharge capacity is 98.9％ for y=0.30. The larger lattice parameter for the smaller value of y is related to the larger discharge capacity. The more quantity of the intercalated and the deintercalated Li in the sample with the larger discharge capacity brings about the larger capacity fading rate.ate.

• Fisheries and Aquatic Sciences
• /
• v.27 no.3
• /
• pp.195-205
• /
• 2024

Amphipoda is a benthic fauna occupying aquatic environments that can be used as a live feed for mud crabs. The abundance of amphipods in the water is thought to impact the preying capacity of crablets, which in turn will affect their growth performance. This study aims to determine the preying capacity of the crablet stage of Scylla tranquebarica exposed at different densities (20, 30, and 40 amphipods / 0.5 L) of amphipod, Grandidierella megnae. The preying capacity was estimated by counting the number of amphipods ingested by an individual crablet during the 60-day rearing period. The main parameters measured were daily consumption rate (DCR), Cumulative molting (CM), Feed conversion ratio (FCR), and the specific growth rate of weight (SGR-W). The results showed that the DCR and FCR were not affected by amphipod densities but the higher the amphipod density the higher the SGR-W and CM. Based on this study, 30 amphipods / 0.5 L is recommended as the optimal density to optimize the DCR and improve the growth performance of crablets. It is also proposed that surplus live feed will potentially reduce the cannibalism rate of crablets during weaning. However, more research needs to be carried out to elucidate the benefits of crablet-feeding amphipods in communal systems.