• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2590-2597
• /
• 2002

A new torque measuring apparatus adopting the basic principle of a capacitive type sensor is proposed in this article. Two plate electrodes are working as a capacitive sensor, whose capacitance varies as torque is applied. One end of each plate is connected to the torque carrying shaft. Output characteristics of the torque sensor were theoretically analyzed and its validity was investigated through experiment. Calculations and calibration experiments show that the output is nonlinear, that is, the sensitivity is very high at low torque but decreases as torque increases. The sensitivity of the proposed system is about 100 times roughly higher than that of a conventional 4-strain gauge type torque sensor.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.121-126
• /
• 2005

This paper describes the attributes, performance and development status of a high performance capacitive torque sensor intended for use in a electric power steering (EPS) system. The EPS system is composed of torque sensor, ECU, motor, gears and etc. Among the elements, torque sensor in the steering column is one of the core technologies. The new capacitive torque sensor in this paper is developed differently from working principle and mechanical structure compare to extant torque sensors in market and patent. Based on the result of numerical analysis, a experimental equipment is made which is composed of a test jig and a capacitive sensor and validity of numerical analysis and feasibility of the torque sensor are verified.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.786-789
• /
• 1995

With a newly designed capacitive torque sensor a multipurpose magnetometer for measuring basic magnetic characteristics such as hyteresis loops, magnetic anisotropy and magnetostriction was built. In order to calibrate the capacitive torque sensor, we measured the output voltages of the sensor by applying the torques due to the electromagnetic and gravitational forces. Experimental results of the several calibration method for the capacitive torque sensor showed good agreement within 3 %.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1117-1118
• /
• 2011

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.335-338
• /
• 2005

Starting with the development of environmentally friendly electric controlled engine, sensors have played an increasing role in automotive technology. Electric power steering (EPS) systems are more and more replacing hydraulic systems. To improve fuel economy, the power assistance is provided by an electric drive. In this paper, development of a unique torque sensor for EPS is introduced. A capacitive type torque sensor is concluded to be suitable for EPS because its output is accurate, linear and robust against the variance of temperature, and patents have not applied so much.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1995년도 춘계연구발표회 논문개요집
• /
• pp.22-23
• /
• 1995

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.13-20
• /
• 2005

The most typical fuel control devices of motorcycle engines have carburetors, they are simple in structure and reliable in work. Most of the motorcycle engines have used carburetors in the fuel system, but the fuel economy and the emissions of those engines are bad when we compared with automobile engines. According to stricter emission regulations and higher requirements for fuel economy, the application of the carburetor on the motorcycle engines would be limited. In this paper, we studied about the ECU of motorcycle engine controled by indirect method. A new engine system was designed and experiments were carried out. The experimental results for both carburetor type and ECU type were compared. Maximum torque of $1.053kg{\cdot}m$ at 6500rpm was measured. The engine torque controled using ECU was increased by $10\%$ compared with the carburetor type.