DOI QR코드

DOI QR Code

Output Characteristics and Sensitivity Analysis of Capacitive Type Torque Sensor

정전용량방식 토크센서의 출력특성과 감도해석

  • 이신표 (경기대학교 기계공학과) ;
  • 김종보 (경기대학교 대학원 기계공학과)
  • Published : 2002.12.01

Abstract

A new torque measuring apparatus adopting the basic principle of a capacitive type sensor is proposed in this article. Two plate electrodes are working as a capacitive sensor, whose capacitance varies as torque is applied. One end of each plate is connected to the torque carrying shaft. Output characteristics of the torque sensor were theoretically analyzed and its validity was investigated through experiment. Calculations and calibration experiments show that the output is nonlinear, that is, the sensitivity is very high at low torque but decreases as torque increases. The sensitivity of the proposed system is about 100 times roughly higher than that of a conventional 4-strain gauge type torque sensor.

Keywords

References

  1. Joo, J. W., Na, K. S. and Kim, G. S., 1998, 'Design and Evaluation of Small Size Six-axis Force/Torque Sensor Using Parallel Plate Structure,' Transactions of the KSME. A, Vol. 22, No. 2, pp. 352-364
  2. Joo, J. W. and Kang, D. I., 1999, 'Strain Analysis and Calibration Test of Small Capacity Torque Sensor,' Transactions of the KSME. A, Vol. 23, No. 3, pp. 382-391
  3. Kim, J. Y. and Kang, C. G., 1999, 'Strain Analysis of a Six Axis Force-Torque Sencor Using Cross-Shaped Elastic Structure with Circular Holes,' Journal of the KSPE, Vol. 16, No. 2, pp. 5-14
  4. Bolton, W., 2000, Mechatronics, Addison Wesley, New York, pp. 67-71
  5. Kim, J. I., Oh, S. H., Lee, C. W., Cheong, Y. D. and Kim, J. N., 2000, 'Analysis and Development of the Angular Twist Type Torque-meter,' Journal of the KSPE, Vol. 17, No. 6, pp. 103-110
  6. Crandall, S. and Dahl, N., 1978, An Introduction to the Mechanics of Solids, McGraw-Hill, New York, pp. 739-764
  7. Halliday, D., Resnick, R. and Walker, J., 1993, Fundamentals of Physics, 4th Ed., John Wiley & Sons, New York, pp. 739-764
  8. Doebelin, E. O., 1990, Measurement Systems, McGraw-Hill, New York, pp. 254-255
  9. Coughlin, R. and Driscoll, F., 1991, Operational Amplifier and Linear Integrated Circuit, Prentice Hall, New Jersey, pp. 201-208
  10. Lee, B. S., 1987, Sensor Introduction, Sewoon, Seoul, pp. 151-152
  11. Lee, S. P., Kauh, S., 2000, 'Calibration Equation for VTA Including the Effect of Ambient Temperature Drift,' Proc. of The KSME Fall Annual Meeting, B, pp. 99-104
  12. Kline, S. J. and Mcklintock, F. A., 1953, 'Describing Uncertainties in Single Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8