• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1561-1564
• /
• 2004

A CMOS-based Electronically Tunable Capacitance Multipliers, which can be magnified the value of a grounded unit capacitance, is presented in this article. The multiplication factor is varied by the ratio of the bias currents. The proposed circuit is simple, small in size and suitable for implementing in standard CMOS process. PSPICE simulation results demonstrating the characteristics of the proposed circuit are included.

• Journal of the Korean Ceramic Society
• /
• v.45 no.8
• /
• pp.482-485
• /
• 2008

Composite electrode consisting of carbon nanofiber (CNF) and cobalt oxide was prepared for supercapacitor electrode, and its electrochemical property was investigated by means of cyclic voltammetry. Cyclic voltammetric results for the composite electrode showed it had specific capacitance value of 420 F/g at 5 mV/s, which was higher than capacitance value of 180 F/g for the bare CNF. It is concluded that the capacitive property of CNF can be improved by coating cobalt oxide on it to increase the surface area of cobalt oxide.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.399-402
• /
• 1999

In this paper, a new method for calculating capacitance in arbitrarily shape structure is Presented. This new approach based on divergence theorem of Gauss\`s law is acheive by Surface-Contacted Element(SCE) for Gaussian surface. To evaluate accurate capacitance value in nonuniform electric field. in two dimensional analysis the interpolation using the elements which contact one nod (PE: Point-Element) or two nod (FE: Face-Element) is employed. Because the elements contacted with surface are very small compared with total elements in analytic model, SCE method has shorter computing time to calculate capacitance. This proposed method is verified by comparing the simulated results with value obtained by analytic method.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.2
• /
• pp.212-220
• /
• 2012

In the current paper, the optimization shape of a polysilicon variable-capacitance micromotor (VCM) was determined using the seeker optimization algorithm (SOA). The optimum goal of the algorithm was to find the maximum torque value and minimum ripple torque by varying the geometrical parameters. The optimization process was performed using a combination of SOA and the finite-element method (FEM). The fitness value was calculated via FEM analysis using COMSOL3.4, and SOA was realized by MATLAB7.4. The proposed method was applied to a VCM with eight and six poles at the stator and rotor, respectively. For comparison, this optimization was also performed using the genetic algorithm. The results show that the optimized micromotor using SOA had a higher torque value and lower torque ripple, indicating the validity of this methodology for VCM design.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.6
• /
• pp.433-439
• /
• 2018

This study considers the design of a submodule test circuit for the modular multi-level converter (MMC)-based HVDC systems. A novel submodule test circuit is proposed to provide not only an AC but also a DC component to the submodule current. However, the current waveforms depend on the capacitor voltages. Therefore, determining the capacitance value of the test circuit is important. Finding a proper capacitance value is easy when the proposed analysis method is used. Simulation and experimental results show the usefulness of the proposed method.

• Journal of IKEEE
• /
• v.28 no.3
• /
• pp.290-295
• /
• 2024

Transimpedance Amplifiers (TIAs) used in optical sensors can experience stability issues and bandwidth limitations due to the parasitic capacitance of photodiodes. These issues are typically resolved by incorporating a feedback capacitor, and the selection of this capacitor is crucial for stability. Traditionally, the value of the feedback capacitance has been determined through feedback system analysis, which has limitations in accurately determining the optimal value. This paper proposes a method for accurately determining the feedback capacitance value through transient response analysis and validates this approach through simulation comparisons.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.128.2-128
• /
• 2001

Since pulse energization can improve the performance of Electrostatic Precipitator(ESP) for high resistivity dusts, high voltage micro-pulse generators, 70kV 140usec duration pulses for instance, are commonly developed by LC resonance for most pulse powered ESPs. Consisting of discharge electrodes and collecting electrodes, ESP has its own capacitance like a capacitor. ESP's capacitance affects the LC resonance phenomenon with resonance inductor and capacitor of micro-pulse power supply, engineers should acquire the value of their ESP to design for proper power supply design. In this study, we describe the ESP's capacitance measuring device which has the same topology with our new developed micro-pulse power supply. In this microcontroller based capacitance measuring equipment, ESP's capacitance can be calculated easily through ...

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.6
• /
• pp.653-657
• /
• 2015

A new paired gate-source voltage RF capacitance-voltage (C-V) method of extracting the effective channel length and parasitic capacitance using the intersection between two closely spaced linear regression lines of the gate capacitance versus gate length measured from S-parameters is proposed to remove errors from conventional C-V methods. Physically verified results are obtained at the gate-source voltage range where the slope of the gate capacitance versus gate-source voltage is maximized in the inversion region. The accuracy of this method is demonstrated by finding extracted value corresponding to the metallurgical channel length.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.232-232
• /
• 2000

switched reluctance motors and drives are increasingly used in industrial applications due to their robust mechanical structure, low inertia and reduction in the rotor losses. As the motor speed increase turn on angle must be advanced to build up phase current. When C-dump converter is applied to switched reluctance motor, the capacitance of dump C has to have proper value. In this paper advance angle for a switched reluctance motor and capacitance of dump C are investigated. Then proper advance angle and the capacitance of dump-C are propose for the industrial low voltage SR motor.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.81-87
• /
• 2007

This paper proposes a new capacitance estimation scheme for a DC-link capacitor in a three-phase AC/DC/AC PWM converter. A controlled AC voltage with a lower frequency than the line frequency is injected into the DC-link voltage, which then causes AC power ripples at the DC side. By extracting the AC voltage and power components on the DC output side using digital filters, the capacitance can then be calculated using the Support Vector Regression (SVR). By training of SVR, a function which relates a given input (capacitor's power) and its corresponding output (capacitance value) can be derived. This function is used to predict outputs for given inputs that are not included in the training set. The proposed method does not require the information of DC-link current and can be simply implemented with only software and no additional hardware. Experimental results confirm that the estimation error is less than 0.16%.