• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.173-178
• /
• 2001

The materials processing factors such as remelting and casting, heat treatment and microstructure, sheet rolling and can body forming in the aluminum can-to-can recycling procedure have been investigated. Aluminum used beverage can(UBC) was remelted together with virgin aluminum. The ceramic filter was used during casting to remove large impurities. As-cast microstructure was composed of large intermetallic compound (mainly $\beta$ -phase) distributed in the aluminum matrix. By heat treatment, $\beta$ -phase was transformed to $\alpha$ -phase which was also formed from $Mg_2$Si particles. The heat treated ingots were hot-rolled at 48$0^{\circ}C$ and cold-rolled to thin sheets. Can making from this thin sheets was successful and earing was measured after can making. There was a critical cold reduction rate for minimum earing. Some cracks were initiated from the impurity particles which was not removed during filtering.

• 한국컴퓨터산업학회논문지
• /
• 제9권1호
• /
• pp.1-10
• /
• 2008

본 논문은 의사가 환자에 대해 의료행위를 수행할 때 발생되는 환자의 질병에 대해 최적의 대안을 마련하고 치료를 결정하는 의사결정 방법론을 제시하고자한다. 즉 의사가 환자를 진료 할 때 진료 과정에서 질병에 대한 경험만으로 확진하는 경우가 일반적이다. 이럴 경우 환자의 특성이나 체질을 고려하지 않아 의외의 치료 부작용이 발생될 수 있다. 이러한 문제점을 최소화하기 위해 의학적 의사결정 도구를 이용하게 된다. 따라서 본 논문은 의학적 의사결정 시스템 개념을 정리하고 의사결정에 도움을 주는 여러 도구들(decision-making tools)을 분석해 보고 최적의 진료 의사결정에 도움을 줄 수 있는가에 대해 타당성을 고찰하였다.

• 한국치위생학회지
• /
• 제22권1호
• /
• pp.73-79
• /
• 2022

Objectives: This study aimed to analyze the correlation among dental hygiene students' life stress, grit, and career decisionmaking self-efficacy, and to identify the factors influencing career decision-making self-efficacy. Methods: Data were collected through a survey from October 19 to November 7, 2020, targeting 196 students enrolled in dental hygiene departments in Daejeon and Daegu. Life stress, grit, and career decision-making self-efficacy were measured. For data analysis, the descriptive statistics, t-test, ANOVA, Pearson's correlation coefficient, and stepwise multiple regression analysis were performed using SPSS/WIN 24.0. Results: Life stress was 2.12 points, grit was 3.07 points, and career decision-making self-efficacy was 3.43 points. Career decision-making self-efficacy was influenced by satisfaction with the course department, as well as life stress and grit; the most influential factor was found to be grit. These variables could explain career decision-making self-efficacy by 23.8%. Conclusions: For students to advance successfully into society as dental hygienists, a career decision-making self-efficacy promotion program that can help students achieve self-confidence and establish career goals should be developed. additionally, a program that can enhance grit should be included in this development.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.452-457
• /
• 2000

The object of this study is to develop a reliable FEM simulation technique for the analysis of can making process using PAM-STAMP software. The processes consist of doming and necking in addition to drawing, redrawing. After body making process, this study analyzed the stability for internal pressure by simulating buckling test. Through these technique, we estimated the dome reversal pressure of steel D&I Can for various can profile and process conditions. From this study, we found the cause and mechanism of wrinkling during necking process. This mechanism is largely affected by can wall thickness and the clearance between knock out punch and necking die. The dome reversal pressure improves with increasing dome depth. These results validate the usefulness of the developed simulation technique for the analysis of body making process and optimization of the dome profile.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.838-840
• /
• 2002

Presently, Analytic Network Process which evaluates man's intention and offers decision-making support is capturing the spotlight. It originates in the ability of Analytic Network Process to treat various decision-making support system. However, no detailed reference is available when dealing with the group case. This paper examines the technique, which can also cope with the group decision-making support system, and describes the validity of the technique. A characteristic feature of the proposed technique is that it can detect a group's intention in a given section, and it decomposes the sectional supermatrix into a small supermatrix and a large one. A general supermatrix treats the convergence value by taking the limiting process method of the power of an evaluation value. On the other hand, when a supermatrix has nonnegative value, it can easily be solved by the eigenvector method. The decomposition of the supermatrix has been considered in this work.

• 산업경영시스템학회지
• /
• 제30권3호
• /
• pp.158-164
• /
• 2007

Supply Chain Management (SCM) system is a critical investment that can affect the competitiveness and performance of a company. Selection of a right SCM system is one of the critical issues. This paper presents the characteristic factors of SCM system and a Fuzzy AHP (Analytic Hierarchy Process) based decision-making model for SCM system evaluation and selection. This study focuses on quantitative factors, applying the fuzzy concept to various evaluative factors. The proposed model can systematically construct the objectives of SCM system selection to achieve the business goals. A empirical example demonstrates the feasibility of the proposed model and the model can help a company to make better decision-making in the SCM system selection problem.

• 지능정보연구
• /
• 제1권2호
• /
• pp.1-16
• /
• 1995

The field of human judgment and decision making provides useful methodologies for examining the human decision making process and substantive results. One of the methodologies is a lens model analysis which can examine valid nonlinearity in the human decision making process. Using the method, valid nonlinearity in human decision behavior can be successfully detected. Two linear(statistical) models of human experts and two nonlinear models of human experts are compared in terms of predictive accuracy (predictive validity). The results indicate that nonlinear models can capture factors(valid nonlinearity) that contribute to the expert's predictive accuracy, but not factors (inconsistency) that detract from their predictive accuracy. Then, it is argued that nonlinear models cab be more accurate than linear models, or as accurate as human experts, especially when human experts employ valid nonlinear strategies in decision making.

• 한국의류학회지
• /
• 제21권4호
• /
• pp.769-781
• /
• 1997

The purpose of this research is to show how to use the patternist's CAD system in order to make design patterns efficiantly. Using the PAD System Technologies company's PAD System Module, which is very officiant in designing patterns, the basic pattern or design pattern can be designed and applyed to the Sample Module, thus, then it could manufacture, retouch or choose a model, making it posible to go to the next level which is seam patterns for industrial use. By understanding the change of the design that is chosen through the design pattern making and Sample Module process', this study is presentated a plan on how to utilize the patternist's working adaption ability by the CAD system, and also considered the problems in using it. Ability of Design Confrontation of CAD System: 1) The result of an operation can be saved and retouched. On a saved list the patterns can be chosen and changed, thus, making it posible to complete a design very quickly. 2) When sewing every designed pattern in Sample Module, the model can be operated merely by selecting each sewing position, thus creating the same effect of a designer's muslin sample process in a much lesser time. Point at issue in the utilization CAD system: 1) When combining two darts into one place the amounts of darts that are already these have to be erasers, and then, the two darts points are moved that place, thus, containing them, which is very conplicated. 2) When making a gathering, because system can only be recognized in a opend line, the pattern should be separated in order to put a gathering inside a pattern. 3) In order to readjust the amounte of dart. The dart is erased first and then made new dart again. 4) When making tucks in a Sample Module, the form that gets narrow towards the pivot point can not be recognized so the sewing lines of the tucks is adjusted into parallel lines. 5) The Sample Module 3D operation can not attach the bodice to the shirts, instead they become fixed into each other. In the case of shoulder line tucks the amounts of pleats can not be expanded draperary naturally, thus, making it hard to showing the silhouette accurately. If these problems are solved, especially if the silhouette of a model can be created to have natural drapery in the 3D Module, models can be shown on the screen in possible to compare and examine even a change of a detail, by designing this 3D Module Production sample process will be more effective, thus, making the CAD system more useful in sewing design process.

• 한국경영과학회지
• /
• 제37권4호
• /
• pp.19-35
• /
• 2012

The Semantic Web technology, purporting to share, to reuse and to process by machines data stored in the Web environment, incessantly evolves to help human decision making; in particular, decision making based on data, or quantitative decision making. This trend drives researchers to fill the gap with strenuous efforts between the current state of the technology and the terminus of this evolution. The Semantic Web Constraint Language (SWCL) together with SWRL is one of these endeavors to achieve the goal. This paper focuses particularly on how to express the piecewise linear form in the context of SWCL. The importance of this ingredient can be fortified by the fact that any nonlinear expression can be approximated in the piecewise linear form. This paper will also provide the information of how it will work in the decision making process through an example of the Internet shopping mall problem.

• 한국의류산업학회지
• /
• 제9권1호
• /
• pp.49-54
• /
• 2007

In the 21th century, the age of image, people express and evaluate with images. Image is a symbol of a person or a thing. It simulates people's visual sense most quickly and precisely and is shared in the society. At the time, since it is acknowledged that there are few books available and lack of theoretical system with regard to image making, the purpose of this study was to get a theoretical access to image making by taking as an empirical case the case of Choi Byeongryeol, a candidate running for the congress in June 4, 1998 and combining it with theories of costume. Research methods employed here were to investigate the theoretical system of image making and fashion direction, and to analyze empirical cases. The boundary of the empirical case was limited to the candidate's fashion direction during the election period for 50 days from April 1998 to the election date June 4, 1998. The results of this study are as follows. First, personal image making aims at the establishment of one's own identity through building up an ideal image. Second, it is found that personal image making can make a complete image possible through fashion direction. Third, it is found that fashion direction functions as a symbol and communicative means with a result that the effect can penetrate to the society accurately and quickly. Fourth, it is found that fashion direction fit for a situation can enhance personal values and reinforce his or her competitive power to carry out the ultimate goals in the society. This study proved that fashion styling for personal image making expresses a person in a symbolic image, enhances his/her personal value in the society and, ultimately, contributes to the establishment of an individual's identity.