• Convergence Security Journal
• /
• v.22 no.4
• /
• pp.141-146
• /
• 2022

The iris, a biometric information, is safe, unique, and reliable, such as fingerprints, and is personal information that can significantly lower the misrecognition rate than other biometric authentication. However, due to the nature of biometric authentication, it is impossible to replace it if it is stolen. There is a case in which an actual iris photo is taken and 3d printed so that the eyes work as if they were in front of the camera. As such, there is a possibility of iris leakage through high-definition images and photos. In this paper, we propose to improve iris masking performance by supplementing iris region masking research based on existing blurring techniques. Based on the results derived in this study, it is expected that it can be used for the security of video conference programs and electronic devices.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.615-617
• /
• 2023

In recent years, the growing popularity of dogs due to the benefits they bring their owners has contributed to the increase of the number of dogs raised. For owners, it is their responsibility to ensure their dogs' health and safety. However, it is challenging for them to continuously monitor their dogs' activities, which are important to understand and guarantee their wellbeing. In this work, we introduce a camera-based monitoring system to help owners automatically monitor their dogs' activities. The system receives sequences of RGB images and uses YOLOv7 to detect the dog presence, and then applies post-processing to perform dog-centered image cropping on each input sequence. The optical flow is extracted from each sequence, and both sequences of RGB and flow are input to a two-stream EfficientNet to extract their respective features. Finally, the features are concatenated, and a bi-directional LSTM is utilized to retrieve temporal features and recognize the activity. The experiments prove that our system achieves a good performance with the F-1 score exceeding 0.90 for all activities and reaching 0.963 on average.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.49.3-49.3
• /
• 2021

The 76 cm telescope in Kyung Hee Astronomical Observatory is participating in the small telescope network of the SomangNet project, which started in 2020. Since the installation of the telescope in 1992, the system configuration has been changed several times. The optical system of this telescope has a Ritchey-Chrétien configuration with 76 cm in diameter and the focal ratio is f/7. The mount is a single fork equatorial type and its control system is operated by TheSkyX software. We use a science camera with a 4k × 4k CCD and standard Johnson-Cousins UBVRI filters, which cover a field of view of 23.7 × 23.7 arcmin. We are also developing the Kyung Hee Automatic Observing Software for the 76 cm telescope (KAOS76) for efficient operations. In this work, we present the standard star calibration results, the current status of the system, and the expected science capabilities.

• Journal of Korean Dental Science
• /
• v.17 no.1
• /
• pp.1-13
• /
• 2024

With the advances of digital scanning technology in dentistry, the interests in facial scanning in orthodontics have increased. There are many different manufacturers of facial scanners marketing to the dental practice. How do you know which one will work best for you? What questions should you be asking? We suggest a clinical guideline which may help you make an informed decision when choosing facial scanners. The characteristics of 7 facial scanners were discussed in this article. Here are some considerations for choosing a facial scanner. *Accuracy: For facial scanners to be of real value, having an appropriate camera resolution is necessary to achieve more accurate facial image representation. For orthodontic application, the scanner must create an accurate representation of an entire face. *Ease of Use: Scanner-related issues that impact their ease of use include type of light; scan type; scan time; file type generated by the scanner; unit size and foot print; and acceptance of scans by third-party providers. *Cost: Most of the expenses associated with facial scanning involve the fixed cost of purchase and maintenance. Other expenses include technical support, warranty costs, transmission fees, and supply costs. This article suggests a clinical guideline to make the right choice for facial scanner in orthodontics.

• Korean journal of communication and information
• /
• v.17
• /
• pp.145-178
• /
• 2001

Bourdieu is one of the few social science researchers who were interested in photography. Bourdieu's work on photography appears principally in two books: Un art moyen: Essai sur les usagrs sociaux de la photographie(1965) and La distinction(1979). In these books, Bourdieu analyzes the role of photography in the family life of peasants and small town and urban dwellers. He shows how different classes and groups express their esthetic worldview in response to different photographs and photographic styles. What Bourdieu analyzed is not just photography but ways of photographing and ways of looking at pictures. Through these analyses, Bourdieu explores the social definition of photography. Bourdieu's ideas on photographic practice in social life are as follows. First, the photography, especially family photography generally practiced, has the integrative function. It recreates the group by ritualizing and solemnizing the important moments of social life in which the group reaffirms its unity. Second, the photography as esthetic practice in search of legitimacy as a fine art becomes a means by which different classes are pitted against each other. Each of classes gives its own meaning to photographic practice. Despite its originality and persuasive power, Bourdieu's work on photography has its own limits. The data used by Bourdieu are 35 years old and relevant to European social life. Things has changed since. First, the technological improvement and innovation in photography was considerable. Cheap and good photographic materials, easy to operate, made photographic practice everybody's everyday activity. New media like camcorder and digital camera made photography one of the industrial discards like jukebox. It means that photography does not function as important means of distinction between classes any longer. The integrative function of the photography becomes more ambiguous too. Second, the esthetic status of the photography has changed. The family photography was already integraed into fine art. Photography is not a middle-brow art any more. Bourdieu's work on photography shows how photography was used by different social classes in European social life of the 1960's. His work is historically and geographically limited. Moreover, his work was ordered by the french affiliate of Eastman Kodak Company. And all along the analysis, Bourdieu didn't hide his intention of distinguishing his sociological method from the other methods, especially psychological one. These mean that Bourdieu's work was done in a specific context, for specific purposes. In this respect, Bourdieu's work on photography, like every sociological work, can not claim to be universal.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.78-82
• /
• 2010

Purpose: Recently, South Korea has seen a rapidly increased incidence of both breast and thyroid cancers. As a result, the I-131 scan and lymphoscintigraphy have been performed more frequently. Although this type of diagnostic imaging is prominent in that visualizes pathological conditions, which is similar to previous nuclear diagnostic imaging techniques, there is not much anatomical information obtained. Accordingly, it has been used in different ways to help find anatomical locations by transmission scan, however the results were unsatisfactory. Therefore, this study aims to realize an imaging technique which shows more anatomical information through the fusion of gamma and realistic imaging. Materials and Methods: We analyzed the data from patients who were examined by the lymphoscintigraphy and I-131 additional scan by Symbia Gamma camera (SIEMENS) in the nuclear medicine department of the National Cancer Center from April to July of 2009. First, we scanned the same location in patients by using a miniature camera (R-2000) in hyVISION. Afterwards, we scanned by gamma camera. The data we obtained was evaluated based on the scanning that measures an agreement of gamma and realistic imaging by the Gamma Ray Tool fusion program. Results: The amount of radiation technicians and patients were exposed was generated during the production process of flood source and applied transmission scan. During this time, the radiation exposure dose of technicians was an average of 14.1743 ${\mu}Sv$, while the radiation exposure dose of patients averaged 0.9037 ${\mu}Sv$. We also confirmed this to matching gamma and realistic markers in fusion imaging. Conclusion: Therefore, we found that we could provide imaging with more anatomical information to clinical doctors by fusion of system of gamma and realistic imaging. This has allowed us to perform an easier method in which to reduce the work process. In addition, we found that the radiation exposure can be reduced from the flood source. Eventually, we hope that this will be applicable in other nuclear medicine studies. Therefore, in order to respect the privacy of patients, this procedure will be performed only after the patient has agreed to the procedure after being given a detailed explanation about the process itself and its advantages.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.986-994
• /
• 2016

In this paper, we proposed ultrasonic radar module and fixed module for the 2D indoor map building and from each of the modules, we can see the possibilities, limitations and considerations. And finally show the result of building actual 2D indoor map from the modules. Recently there are lots of works for the building indoor map by spotlight on the simultaneous localization and mapping (SLAM). And the LiDAR, ultrasonic, camera sensors are usually used for this work. Especially the LiDAR sensor have a higher resolution and wider detection range more than the ultrasonic sensor, but also there are limitation in the size of module, higher cost, much more throughput of processing data, and weaker to use in various indoor environment noises. So from these reasons, in this paper we could verify that proposed modules and schemes have a enough performance to build the 2D indoor map instead of using LiDAR and camera sensor with minimum number of ultrasonic sensors and less throughput of processing data.

• Journal of Bio-Environment Control
• /
• v.22 no.1
• /
• pp.73-79
• /
• 2013

An experiment was conducted to study incidences of heat loss in greenhouse in Gyeongnam province using thermal imaging camera in order to determine ways minimizing greenhouse heat loss. Measurements of this work showed that temperature differences between two experiment zones before and after installation of thermal curtains were about $2.0{\sim}3.0^{\circ}C$ and $1.0{\sim}2.0^{\circ}C$ respectively. There was a high correlation between the temperature data measured using a thermal imaging camera and a temperature sensor. There was no serious difference among areas, but between places on the first and second floor with thermal curtains for heat insulation, there was a relatively larger heat loss on the first floor than the second floor. Then in general the greenhouse types had no particular bearing on this matter, there was a relatively large heat loss in the parts of side wall window, the gaps and the parts folded of horizontal thermal curtains, the gutter parts, and the gaps of thermal curtain in the side wall window and facade back side for heat insulation, aren't completely sealed. It was found that there was a substantial heat loss due to infiltration through cracks on covering material, doors, ventilating openings, roof gables and floors, in particular.

• Cartoon and Animation Studies
• /
• s.14
• /
• pp.165-176
• /
• 2008

In the future there would be many kinds of digital images for many industrial markets. 3D stereoscopic images for variable fields; medical operation, film and animation, broadcasting, internet, game, or design for art and architecture. And many people to work about computer programming, and digital image making will concern about it more and more. However, these kinds works and studies are focused on the professional technical fields like 3D display or computer programming technology so far. To revitalize the market of a variable stereoscopic contents, there should build up the foundation for easy processing of the making stereoscopic images. This paper is based on stereoscopic making skills for anaglyph system. An anaglyph system has an old history about making stereoscopic images, and very simple method to produce the stereoscopic images. Particularly this study is focused on color compositing technique, and camera positioning on the compositing system. It will help optimization of the environments to create 3D motion graphic and animation contents.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2018

AGVS (Automated Guided Vehicle System) is a core technology of logistics automation which automatically moves specific objects or goods within a certain work space. Conventional AGVS generally requires the in-door localization system and each AGV equips expensive sensors such as laser, magnetic, inertial sensors for the route recognition and automatic navigation. thus the high installation cost is inevitable and there are many restrictions on route(path) modification or expansion. To address this issue, in this paper, we propose a cost-effective and scalable AGV based on a light-weight pattern recognition technique. The proposed pattern recognition technology not only enables autonomous driving by recognizing the route(path), but also provides a technique for figuring out the loc ation of AGV itself by recognizing the simple patterns(bar-code like) installed on the route. This significantly reduces the cost of implementing AGVS as well as benefiting from route modification and expansion. In order to verify the effectiveness of the proposed technique, we first implement a pattern recognition algorithm on a light-weight MCU(Micro Control Unit), and then verify the results by implementing an MCU_controlled AGV prototype.