• Elastomers and Composites
• /
• v.22 no.4
• /
• pp.333-339
• /
• 1987

A modern kinetic evaluation method for nonisothermal reactions measured with Differential Scanning Calorimetry(DSC) is presented. It is based on multiple linear regression analysis using a number of curve points in a selectable range of conversion. The obtained kinetic data are the basis to compute a reaction process under any condition e.g. isothermal or adiabatic. The DSC measurements was performed on a Mettler TA3000 SYSTEM with the built in evaluation software. Mainly the following reactions are discussed: vulcanization of natural rubber compounds containing vulcanizing accelerators. The purpose of this work is to analyse the vulcanization kinetics of typical NR vulcanization systems using DSC. These systems were chosen because they are typically reactive elastomer and are commercially important.

• BMB Reports
• /
• v.35 no.3
• /
• pp.302-305
• /
• 2002

Kinetic and thermodynamic studies have been made on the effect of the inosine product on the activity of adenosine deaminase in a 50 mM sodium phosphate buffer, pH 7.5, at $27^{\circ}C$ using UV spectrophotometry and isothermal titration calorimetry (ITC). A competitive inhibition was observed for inosine as a product of the enzymatic reaction. A graphical-fitting method was used for determination of the binding constant and enthalpy of inhibitor binding by using isothermal titration microcalorimetry data. The dissociation-binding constant is equal to $140\;{\mu}M$ by the microcalorimetry method, which agrees well with the value of $143\;{\mu}M$ for the inhibition constant that was obtained from the spectroscopy method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.182-183
• /
• 2021

In this study, This is the result of thermal characteristics analysis to suggest an efficient method of using coal gasification slag(CGS) of byproduct from integrated gasification combined cycle(IGCC). In Specific Heat characteristics, CGS and CS showed similar values. Isothermal Conduction Calorimetry showed that the hydration reaction of cement was retarded when CGS was used. Therefore, it is expected that CGS will be used as an efficient alternative to reducing the hydration heat of mass concrete as a functional aggregate combination.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.313-315
• /
• 2003

The heat loads invaded from the environment to several parts of superconduct cable cooling system were measured by liquid boiloff calorimetry. The measuring system was verified by the measurement to a uniform heat loads. The heat loads by the tubes for relief and pressure gauges were greater than the estimated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.7
• /
• pp.1085-1089
• /
• 1999

Energy requirement of Rhode Island Red (RIR) hens was studied by comparative slaughter technique. Seventeen hens above 72 weeks of age were slaughtered in batches. Batch I consisted of 5 hens which were slaughtered initially. Batch II comprised of six hens, which were fed ad libitum broken rice (BR)-based diet for 18 days. Record of feed intake, number of eggs laid and egg weight during the period was kept. These hens were slaughtered and body energy content was determined. Egg energy was consisted as energy deposited. Batch III consisting of six hens which were fed varying quantity of diet for 15 days, were slaughtered similarly as hens of batch II. Regression equation (body weight to body energy) developed on batch I was applied to batch II and developed on batch II was applied to batch III hens, to find out initial body energy content of hens. Egg energy (EE) was calculated according to formula: EE (kcal) = -19.7 + 1.81 egg weight (g). Regressing metabolisable energy (ME) intake on energy balance (body energy change + egg energy), maintenance ME requirement of hens was found to be $119.8kcal/kg\;W^{0.75}/d$. Multiple regression of ME required for production on energy retained as protein and fat (body plus egg energy) indicated that RIR hens synthesize proteins with an efficiency of 85.5 and fat with an efficiency exceeding 100 percent on BR based diet.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.777-786
• /
• 2000

Fire resistance and thermal stability of polypropylene composite systems were investigated by using several halogenated fire-retardants such as decabromodiphenyl oxide (DBDPO) and chlorinated paraffin wax (CPW). The fire resistance of composite systems was thoroughly examined by measuring limited oxygen index (LOI, ASTM D2863, ISO 4589) and characteristic properties of cone calorimetry(ASTM E1354, ISO 5660) heat release rates (HRR), time to ignition (TTI), total heat release (THR), effective heat of combustion (EHC), mass loss rates, etc. Comparing the cone calorimetry experimental results of the halogen flame retardants, DBDPO exhibited twice higher efficiency than CPW in polypropylene systems, and the LOI also showed similar trends to cone calorimetry. The thermo-oxidative stability of the composite systems was increased about 30-5$0^{\circ}C$ in thermogravimetry analysis.Collectively, the combustion, extinction and thermally-stable characteristics of flame retardants were identified in this study.

• Composites Research
• /
• v.33 no.2
• /
• pp.44-49
• /
• 2020

The cure kinetics of carbon fiber-reinforced prepreg for Vacuum Bag Only(VBO) process was studied by differential scanning calorimetry (DSC). The total heat of reaction (ΔH_total = 537.1 J/g) was defined by the dynamic scanning test using prepregs and isothermal scanning tests were performed at 130℃~180℃. The test results of isothermal scanning were observed that the heat of reaction was increased as the temperature elevated. The Kratz model was applied to analyze the cure kinetics of resin based on the test results. To verify the simulation model, the degree of cure from panels using different cure cycles were compared with the measurement. The simulation model showed that the error against the experimental value was less than 3.4%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.547-553
• /
• 2017

Thermal analysis of three energetic materials used in pyroelectric device was performed using Differential Scanning Calorimetry (DSC). The theoretical method for extracting the reaction rate equation of energetic materials using DSC experimental data is proposed and the reaction rate extraction is performed. The results of the DSC were analyzed by the conversion method such as Friedman. Activation energy and frequency factor according to mass fraction were extracted to complete the reaction rate equation. The extracted reaction rate equation has a form that represents the entire chemical reaction process, not the assumption that the chemical reaction process of the high energy material is a main step in several stages. It has considerable advantages in terms of theoretical and accuracy as compared with the chemical reaction rate form extracted through conventional thermal analysis experiments. Using the derived reaction rate equation, we predicted the performance change of three energetic materials operating on actual storage condition over 20 years.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.5
• /
• pp.40-47
• /
• 2017

The effects of ultrasound in heterogeneous system were investigated in three kinds of ultrasonic systems including a bath-type system (System #1), a double-bath-type system (System #2), and a double-bath-type system partly filled with glass beads (System #3). The ultrasound energy and its attenuation were quantified using calorimetry and the sound pressure measurement method. The sonochemical effects mainly involved in radical oxidation reactions were quantified using KI dosimetry. It was found that ultrasound energy was significantly attenuated in System #2 and #3 due to the presence of solid materials such as a submerged stainless steel reactor and glass beads. However, in spite of low ultrasound energy status, sonochemical oxidation reactions occurred more violently due to the presence of glass beads in System #3. In addition, calorimetry was more adequate to estimate the total energy status of ultrasound in sonoreactors compared to the sound pressure measurement method.

• BMB Reports
• /
• v.35 no.5
• /
• pp.472-475
• /
• 2002

Phaseolus vulgaris phytohemagglutinin L is a homotetrameric-leucoagglutinating seed lectin. Its three-dimensional structure shows similarity with other members of the legume lectin family. The tetrameric form of this lectin is pH dependent. Gel filtration results showed that the protein exists in its dimeric state at pH 2.5 and as a tetramer at pH 7.2. Contrary to earlier reports on legume lectins that possess canonical dimers, thermal denaturation studies show that the refolding of phytohemagglutinin L at neutral pH is irreversible. Differential scanning calorimetry (DSC) was used to study the denaturation of this lectin as a function of pH that ranged from 2.0 to 3.0. The lectin was found to be extremely thermostable with a transition temperature around $82^{\circ}C$ and above $100^{\circ}C$ at pH 2.5 and 7.2, respectively. The ratio of calorimetric to vant Hoff enthalpy could not be calculated because of its irreversible-folding behavior. However, from the DSC data, it was discovered that the protein remains in its compact-folded state, even at pH 2.3, with the onset of denaturation occurring at $60^{\circ}C$.