• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1B
• /
• pp.34-46
• /
• 2009

The remarkable growth of Korean telecommunication market has based on the introduction of competition as well as mobile technology like CDMA. It was well Down that such a conspicuous growth has been towed by mobile service rather than fixed telephone service. In telecommunications service the number of subscribers to mobile was over 40 millions in 2006 and also, while the traffic amount of fixed telephone has been more decreased, that of mobile, which already outnumbers the fixed, has been constantly increased and will be much more in future. It will accelerate the substitution of access and call demand of fixed service by mobile. This change of technology and demand does affect directly the market performance of telecommunications. And regulation has also an effect on market structure, which finally affects on market performance. In this paper we suppose the fixed and mobile telecommunications services are in a same industry. After reviewing the relations among the demand, cost, charge structure and revenue structure in the one fixed and mobile telecommunications market using the framework of an industrial structure analysis, we discuss the current issues of telecommunications regulation and implications for the future regulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.904-910
• /
• 2008

In this paper, we consider the military requirement, study the military network services and their related traffic parameters, evaluate the performance the experimental army network and then suggest the design guideline of applying VoIP to the whole military. We evaluate the performance of the delay and loss in the viewpoint of packet and call levels for the several scenarios. First, the performances of separate network service were considered and the satisfaction of the requirement was obtained. Secondly, the delays and losses of the integrated network services were calculated as the amount of the background traffic increases. Finally, based on the simulation results, we presented the design guideline which classified network configurations for applying VoIP equipment and helped estimate the number of VoIP terminals in the existing link.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.29-40
• /
• 1997

Two asymptotic analyses of the queue length distribution at a statistical multiplexor supporting heterogeneous exponential on-off sources are considered. The first analysis is performed by approximating the cell generation rates as a multi-dimensional Ornstein-Uhlenbeck process and then applying the Benes queueing formula. In the second analysis, w state with a system of linear equations derived from the exact expressions of the dominant eigenvalue of the matrix governing the queue length distribution. Assuming that there are a large number of sources, we obtain asymptotic approximations to the dominant eigenvalue. Based on the analyses, we define a traffic descriptor to include the mean and the variance of the cell generation rate and a burstiness measure. A simple expression for the quality of service (QoS) in cell loss rate is derived in terms of the traffic descriptor parameters and the multiplexor parameters (output link capacity and buffer size). The result is then used to quantify the factors determining the required capacity of a call taking the statistical multiplexing gain into consideration. As an application of the analyses, we can use the required capacity calculation for simple yet effective connection admission control(CAC) algorithms.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.3
• /
• pp.85-90
• /
• 2008

In this paper, we propose a new robot cleaning algorithm, which we call SetClean. The new algorithm cleans from the most less complex area. Sometimes, when the cleaning completion time can be longer or can not be estimated, cleaning larger area first is better than optimizing the whole time for cleaning. To do this, SetClean algorithm divides the whole area into cleanable sub-areas using Set Cover algorithm and cleans the area in the order of high efficiency that maximize the cleanable area per unit time. SetClean algorithm decides the navigation flow by considering not only the size of the area but also the distance from the current robot location to the area to be cleaned and the delay time caused by the number of turns within the area. The experimental results show the mechanism and performance of the SetClean algorithm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.2
• /
• pp.272-277
• /
• 2008

Symmerge is a stable minimum storage merging algorithm that needs $O(m{\log}{\frac{n}{m}})$ element comparisons, where in and n are the sizes of the input sequences with $m{\leq}n$. Hence, according to the lower bound for merging, the algorithm is asymptotically optimal regarding the number of comparisons. The Symmerge algorithm is based on the standard recursive technique of "divide and conquer". The objective of this paper is to consider the relationship between m and n for the degenerated case where the recursion depth reaches m-1.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.4
• /
• pp.669-677
• /
• 2013

Quasi-Monte Carlo method is known to have lower convergence rate than the standard Monte Carlo method. Quasi-Monte Carlo methods are using low discrepancy sequences as quasi-random numbers. They include Halton sequence, Faure sequence, and Sobol sequence. In this article, we compared standard Monte Carlo method, quasi-Monte Carlo methods and three scrambling methods of Owen, Faure-Tezuka, Owen-Faure-Tezuka in valuation of multi-asset European call option through simulations. Moro inversion method is used in generating random numbers from normal distribution. It has been shown that three scrambling methods are superior in estimating option prices regardless of the number of assets, volatility, and correlations between assets. However, there are no big differences between them.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.13 no.3
• /
• pp.103-110
• /
• 2013

Background: Recently the use of sedation by pediatric dentists in Korea is increased. This study describes training programs about sedation practices in Korean pediatric dentistry residency program. Methods: A questionnaire was filled in by participants of Korean Academy of Pediatric Dentistry on 17th-18th August, 2008. Also the data about sedation practices of the training institution is collected by phone call. Results: Seventy two percent of respondents used sedation. Most of them used sedation with agents under 25% of their patients. Distribution of ages in patients sedated with agents was 3 years, 4-5 years, under 2 years, 6-10 years, and more than 10 years. Determinative factors of using sedation were behavior management, number of visiting, amount of treatment and general condition, and oral route was the most favorable route. Sixty six percent of them have failed on sedation, and thity percent of them have rarely failed on sedation. Only fifty percent of dentists using sedation completed the cardiopulmonary resuscitation course. Conclusions: For safety, dentists using sedation need to be educated about emergency equipment and management. Especially medication dose, use frequency and the detail related to treatment procedure should be discussed carefully. Also putting a patient under general anesthesia and taking emergency measures should be discussed with Korean Dental Society of Anesthesiology.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.353-359
• /
• 2009

Most domestic container terminals are lack of container storage capacity compared to the throughput of container. The main reason is the difference between the theoretical capacity applied to the development of terminals and the real capacity of a berth Another reason seems to be the increase of the container crane in number per berth to match the need for the getting larger vessel, which is resulted from the increase of the berth capacity from the start. This study, therefore, aims to suggest the economic size of container yard by comparing the existing one. For this the berth capacity was recalculated, the required yard size derived considering up to 10,000TEU vessel and then cost comparison done.

• IE interfaces
• /
• v.9 no.3
• /
• pp.180-193
• /
• 1996

본 논문에서는 시뮬레이션 모델을 통해 호유형뿐만 아니라 개인통신서비스에서 필수적인 핸드오버 및 위치등록 등의 모든 트래픽 유형을 고래했을 때 개인통신교환기(PCX : Personal Commuincations Exchange)에서의 지연시간을 분석하며, 지연시간에 대한 결과와 프로세서의 이용율로부터 개인통신교환기의 호처리 및 이동성처리용량을 분석하고 그에 따른 가입자의 수용능력을 추정한다. IPC(Inter-Processor Communications) 메시지의 송수신시간 및 메시지의 처리시간등 교환기 제어계의 성능분석에 필요한 입력 파라미터 값은 기존 ISDN(Integrated Services Digital Network) 및 CMS-MX(CDMA Mobile System-Mobile Exchange) 교환기의 측정자료를 이용하였다. 시뮬레이션 분석결과 PCX 교환기의 호처리 성능은 주로 번호번역 기능을 담당하는 프로세서인 NTP(Number Translation Processor)의 용량에 의해 결정되며, 가입자 밀도가 1,500명$/km^2$인 경우 호처리용량은 약 42만 BHC(Busy Hour Call Completion)로 추정되었고, 이에 상응하는 핸드오버 및 위치등록 처리용량은 각각 시간당 약 2만 6천히 및 40만 6천회로 나타났다. 이것은 가입자당 호처리 부하가 1.6BHC일 경우, 약 15만 7천 가입자를 수용할 수 있는 용량에 해당한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.803-804
• /
• 2016

With the advent of Germany's Industry 4.0, research of smart factory to applying the ICT in manufacturing industries is in progress. But the current system controlled equipment using the data declared in the embedded systems. In this paper, we proposed equipment control method to implement smart factory based on IoT. This method is create D/B table of data declared in equipment. and equipment shall call all of control unit parameters. When using the present method, it is possible to efficiently control the number of equipment as less network resource. Also It can operating a factory efficiently.