• Journal of Korean Society on Water Environment
• /
• v.29 no.5
• /
• pp.681-690
• /
• 2013

Watershed models have been increasingly used to support an integrated management of land and water, non-point source pollutants, and implement total daily maximum load policy. However, these models demand a great amount of input data, process parameters, a proper calibration, and sometimes result in significant uncertainty in the simulation results. For this reason, uncertainty analysis is necessary to minimize the risk in the use of the models for an important decision making. The objectives of this study were to evaluate three different uncertainty analysis algorithms (SUFI-2: Sequential Uncertainty Fitting-Ver.2, GLUE: Generalized Likelihood Uncertainty Estimation, ParaSol: Parameter Solution) that used to analyze the sensitivity of the SWAT(Soil and Water Assessment Tool) parameters and auto-calibration in a watershed, evaluate the uncertainties on the simulations of runoff and sediment load, and suggest alternatives to reduce the uncertainty. The results confirmed that the parameters which are most sensitive to runoff and sediment simulations were consistent in three algorithms although the order of importance is slightly different. In addition, there was no significant difference in the performance of auto-calibration results for runoff simulations. On the other hand, sediment calibration results showed less modeling efficiency compared to runoff simulations, which is probably due to the lack of measurement data. It is obvious that the parameter uncertainty in the sediment simulation is much grater than that in the runoff simulation. To decrease the uncertainty of SWAT simulations, it is recommended to estimate feasible ranges of model parameters, and obtain sufficient and reliable measurement data for the study site.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.325-331
• /
• 2010

Three-cup anemometers are popular devices for measuring wind speeds in automated weather stations, environmental monitoring systems, and wind turbines. Cup anemometers usually suffer from lack of long-term stability owing to the wear of the bearing systems that support the rotational parts. The bearing systems are susceptible to external pollutants, vibrations, and gusts. Therefore, these anemometers have to be calibrated regularly to maintain the desired characteristics for measuring wind speed. In the present study, a new in-situ calibration system to help reduce cost and save time by calibrating the cup anemometers at the installation site is proposed. A portable in-situ calibrator was fabricated. After the characteristics of this calibrator were verified, it was used to calibrate cup anemometers. Some of the calibration results were compared with the data obtained by wind tunnel testing.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.2
• /
• pp.21-29
• /
• 2017

Recently, with having a great interest of the general public for the AR (Augmented Reality) technology, there have been lots of study to improve efficiency of a construction equipment with applying the AR technology to a construction equipment. The clear extrinsic calibration is essential to applying AR technology at the construction site without any error which came from superimposition between 'Real world' and 'Virtual world'. However, on the construction site, the clear extrinsic calibration is not possible, because of lack of time and budget for the specific survey, also, the huge error of the outdoor tracking system such as gyro, GPS system and so on. In this study, we do research about seamless superposition with unclear extrinsic calibration and the image process method for making AR navigator operating in the excavator. Based on this study, we figure that we can fully develop the AR navigator for the excavator. Furthermore, thereby operating AR navigator at many construction sites, we expect that the efficiency of the excavator will be improved. In addition, we can develop AR navigator for not only a excavator but all about construction equipment.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.92-98
• /
• 2003

A wind turbine monitoring system is essential equipment fur the performance evaluation and mechanical load analysis of a wind turbine. A monitoring system using LabVIEW is developed in this study. This system monitors signals from a meteorological mast, wind turbine generator, and tower. The discrete signals which are sampled at t Hz are automatically saved on a data file in the unit of a day. Besides these basic functions, the developed monitoring system has the other several capabilities. One of them is the information access from a remote PC through the internet. A vision image of the test site area and data files that are produced by LabVIBW software can be uploaded to the main computer located in a remote site. An emergency backup system using UPS fur the power loss on the monitoring HW is also prepared, A detail explanation for the developed wind turbine monitoring system is presented in this study.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.926-932
• /
• 2007

A recently developed methods for on-site calibration of the current transformer (CT) comparator system have been reviewed in the paper. The method utilizes several traveling standards, which consist of the CT, non-reactive standard resistors, wide ratio error CT, and shunt resistors. The traveling CT is used for absolute evaluation of a standard CT belonging to industry. The non-reactive standard resistors and a wide ratio error CT are used for the linearity check of errors in the current comparator. The shunt resistors are used for evaluation of CT burden of industry.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.27-33
• /
• 2004

Mechanical load measurements on blade and tower of Vestas 100 kW wind turbine has been reformed in Wollyong test site, Jeju island. The experimental procedure for the measurement of wind turbine loads, such as edgewise(lead-lag) bending moment, flapwise bending moment, and tower base bending moment, has been established. The test facilities consisting of strain-gauges, telemetry and T-Mon system are installed in the wind turbine. Strain gauges are on-site calibrated against load cell prior to monitoring the wind turbine loads. Using the test setup, the loads on the components are being measured and analysed for various external conditions of the wind turbine. A set of results for near rated wind speed has been presented in this paper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.587-593
• /
• 2000

The background noise and transmission loss of wall were measured on site for the multiplex cinema. The results from the simulation analysis was compared with the measurements from the site for different frequencies to review the acoustical parameters, and the analysis results in the relatively small error. Therefore, it is concluded that the reliable estimation can be made once accurate data such as sound source and sound absorption coefficient of interior material is utilized during the simulation process. However, the calibration is necessary for the test room with the small room volume.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.496-501
• /
• 2005

SWAT2000 model directly estimate the loading of water, and nutrients from land areas in a watershed. it allows to add nutrient loading from the point sourece like a sewage treatment plant and it also has a GIS interface which can easily see the spatial relationship between subbasins. For better assessment of nutrients loading to KEUMGANG estuary, SWAT2000 model applied to KEUMGANG estuary watershed. Model calibration and verification was firstly poerformed at Gongju site duing the period $1999{\sim}2003$. $R^2$ value was 0.96 for streamflow, 0.94 for T-N load and 0.52 for T-P load. The accuracy of the model at Gongju site suggest that the SWAT2000 can be available to estimate streamflow, Nutrients loading to the KEUMGANG estuary.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1456-1463
• /
• 1999

This paper describes the measurement system of antenna factor using standard antenna method in OATS(Open Area Test Site) of KRISS(Korea Research Institute of Standards and Science) and methods for reducing an environmental noise affecting antenna factor. The range of measurement frequency is 30 - 1000 MHz, all control and data acquisition were done by computer automatically. Measurement results of antenna factors are presented, total uncertainty of antenna factor is $\pm$1 dB.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.164-170
• /
• 2008

This research was verified detection way of intercept vehicles and performance evaluation after system installation using image detector as detection way of ground installation. By image recognition algorithm was on the trace of moving orbit of violation vehicles for detection way of intercept vehicles. When moving orbit is located special site, utilized geometric image calibration and DC-notch filter. These are cognitive system of license plate by making signal. Then, Bright Evidence Detection and Dark Evidence Detection were applied to after mixing. It is applied to way of Backward tracking for detection way of intercept vehicles. After the field evaluation of developed system, it should be analyzed the more high than recognition rate of minimum standards 80%. It should rise in the estimation of the site applicability is highly from now.