• 가정∙방문간호학회지
• /
• 제30권1호
• /
• pp.48-58
• /
• 2023

Purpose: The purpose of this study was to construct a nomogram for predicting difficulty in peripheral intravenous cannulation (DPIVC) for adult inpatients. Methods: This study conducted a secondary analysis of data from the intravenous cannulation cohort by intravenous specialist nurses at a tertiary hospital in Seoul. Overall, 504 patients were included; of these, 166 (32.9%) patients with failed cannulation in the first intravenous cannulation attempt were included in the case group, while the remaining 338 patients were included in the control group. The nomogram was built with the identified risk factors using a multiple logistic regression analysis. The model performance was analyzed using the Hosmer-Lemeshow test, area under the curve (AUC), and calibration plot. Results: Five factors, including vein diameter, vein visibility, chronic kidney disease, diabetes, and chemotherapy, were risk factors of DPIVC. The nomogram showed good discrimination with an AUC of 0.81 (95% confidence interval: 0.80-0.82) by the sample data and 0.79 (95% confidence interval: 0.74-0.84) by bootstrapping validation. The Hosmer-Lemeshow goodness-of-fit test showed a p-value of 0.694, and the calibration curve of the nomogram showed high coherence between the predicted and actual probabilities of DPIVC. Conclusion: This nomogram can be used in clinical practice by nurses to predict DPIVC probability. Future studies are required, including those on factors possibly affecting intravenous cannulation.

• Toxicological Research
• /
• 제34권2호
• /
• pp.127-132
• /
• 2018

Alcohol consumption triggers toxic effect to organs and tissues in the human body. The risks are essentially thought to be related to ethanol content in alcoholic beverages. The identification of ethanol in blood samples requires rapid, minimal sample handling, and non-destructive analysis, such as Raman Spectroscopy. This study aims to apply Raman Spectroscopy for identification of ethanol in blood samples. Silver nanoparticles were synthesized to obtain Surface Enhanced Raman Spectroscopy (SERS) spectra of blood samples. The SERS spectra were used for Partial Least Square (PLS) for determining ethanol quantitatively. To apply PLS method, $920{\sim}820cm^{-1}$ band interval was chosen and the spectral changes of the observed concentrations statistically associated with each other. The blood samples were examined according to this model and the quantity of ethanol was determined as that: first a calibration method was established. A strong relationship was observed between known concentration values and the values obtained by PLS method ($R^2=1$). Second instead of then, quantities of ethanol in 40 blood samples were predicted according to the calibration method. Quantitative analysis of the ethanol in the blood was done by analyzing the data obtained by Raman spectroscopy and the PLS method.

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.519-525
• /
• 2018

Obtaining knowledge of the absorbed dose up-taken by a certain material when it is exposed to a specific ionizing radiation field is a very important task. Even though there are a plenitude of methods for determining the absorbed dose, each one has its own strong points and also drawbacks. In this article, an innovative idea for the development of a new gamma-ray dosimetry system is proposed. The method described in this article is based on optical colorimetry techniques. A color standard is fixed to the back of a BK-7 glass plate and then placed in a point in space where the absorbed dose needs to be determined. Gamma-ray-induced defects (color centers) in the glass plate start occurring, leading to a degree of saturation of the standard color, which is proportional, on a certain interval, to the absorbed dose. After the exposure, a high-quality digital image of the sample is taken, which is then processed (MATLAB), and its equivalent $I_{RGB}$ intensity value is determined. After a prior corroboration between various well-known absorbed dose values and their corresponding $I_{RGB}$ values, a calibration function is obtained. By using this calibration function, an "unknown" up-taken dose value can be determined.

• 신재생에너지
• /
• 제20권2호
• /
• pp.17-25
• /
• 2024

In this study, the effect of the time step specified in a computational fluid dynamics (CFD) simulation on load response is analyzed and the drag coefficients of the floating body of floating offshore wind turbines (FOWTs) are estimated. By evaluating the error in the FOWT load response and the change in the drag-coefficient values based on the density of the time intervals, this study aims to establish a time-interval setting that minimizes the time and cost of CFD simulations for selecting drag-coefficient values. Practical CFD utilization strategies necessary for the calibration of medium-to high-fidelity analysis tools are presented. Based on a comparative analysis of CFD simulations conducted at various time intervals, the results confirmed that under a certain time interval that sufficiently considers various factors, the accuracy of the FOWT response with respect to density shows minimal differences, thereby providing an efficient utilization method for CFD simulations in FOWT design and analysis.

• 분석과학
• /
• 제15권5호
• /
• pp.393-398
• /
• 2002

수용액 중의 fluorene 과 anthracene을 동시화 형광분광법을 이용하여 동시에 정량하는 방법에 대하여 연구하였다. 두 화합물 용액에서의 형광특성을 조사하였고, 화합물 혼합용액을 이용하여 동시화 형광스펙트럼을 측정할 때에 파장차이 (${\Delta}{\lambda}$)가 봉우리의 분리에 미치는 영향을 조사한 결과 ${\Delta}{\lambda}$가 50 nm일 때 가장 좋은 봉우리의 분리가 일어났다. 혼합 수용액으로 최적 ${\Delta}{\lambda}$에서 동시화 형광스펙트럼을 측정하여 검정곡선을 작성하였을 때 fluorene의 경우에는 $5.0{\times}10^{-8}M$에서 $1.0{\times}10^{-3}M$, anthracene의 경우에는 $5.0{\times}10^{-8}M$에서 $1.0{\times}10^{-3}M$까지 직선범위 가 성립하였다. Fluorene과 anthracene의 검출한계는 각각 $3.0{\times}10^{-9}M$과 $7.0{\times}10^{-9}M$이었다.

• 한국환경농학회지
• /
• 제40권2호
• /
• pp.99-107
• /
• 2021

BACKGROUND: Pesticide uptake by a rotational crop after being used for the primary crop is a potential cause of violation against the pesticide law if the pesticide is not registered in the secondary crop. This study was conducted to investigate the plant back interval (PBI) of fluopyram for the rotational cultivation of radish. METHODS AND RESULTS: Two experimental approaches were performed the evaluation of residues in radish cultivated successively in soil 16 days after treated with fluopyram onto pepper plant (T1) and in radish cultivated in bare soil treated with fluopyram at PBI 30 and PBI 60 days (T2). A modified QuEChERS method coupled with LC/MS/MS analysis showed good linearity of matrix-matched standard calibration of fluopyram with the coefficient values of determination greater than 0.995. Recovery values at levels of 0.01, 0.05, 0.1 and 0.25 mg/kg ranged from average 84.9 to 117.6% with RSD less than 10%. Fluopyram residues in radish harvested from T1 and T2 were found as levels less than maximum residue limit. CONCLUSION: This study suggests 20~30 days as the PBI of fluopyram for the rotational cultivation of radish in the greenhouse soil treated with fluopyram used for pepper as the primary crop.

• 한국물환경학회지
• /
• 제37권2호
• /
• pp.103-113
• /
• 2021

In this study, an Excel-based model (ROADMOD) was developed to estimate pollutant loading from the road and evaluate BMPs. ROADMOD employs the Chezy-Manning equation and empirical expression for estimating surface runoff, and power function for pollutant buildup, and exponential function for pollutant washoff in SWMM. The results of model calibration for buildup and washoff using observed data revealed a good match between the simulation results and the observed data. The long-term surface runoff and sediment simulated by ROADMOD demonstrated a good match with those by SWMM with 2 ~ 14% of relative error. The shorter sweeping interval (within 8 days) remarkably decreased sediment loads from the road. It was found that the effect of reducing sediment loads from the road was greatly affected not only by the sweeping interval but also by sweeping on the day before a rainfall event. The 48% of removal efficiency of sediment loads from the road was achieved with 26 times of road sweeping per year when sweeping was performed on the day before the rainfall event. A 4-day sweeping interval showed similar removal efficiency (48%) with 96 times of sweeping per year. It is considered that the road sweeping on the day before a rainfall event could maximize the effect of reducing the non-point source pollution from the road with minimization of the number of road sweeping. So, the road sweeping on the day before a rainfall event can be considered as one of the useful and best management practices (BMPs) on road.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.527-532
• /
• 1993

MascMC system is one of the MMC system module which performs measuring and checking of machined workpieces on the machine tools. Accuracy of the MascMC was compensated for developing a reliable measuring system by measurement error calibration. Reference gauges, ring gauges, block gauges,squares, spheres and cylindrical squares, were used for error identification and compensation. .+-. 10 .mu. m accuracy with 95% confidence interval was confirmed on the vertical and the horizontal machining center through the large number of experiments.

• 한국환경과학회지
• /
• 제12권1호
• /
• pp.87-92
• /
• 2003

Synchronous spectrofluorimetry was carried out for the simultaneous determination of various polycyclic aromatic hydrocarbons(PAHs) in aqueous solution by fluorescence spectrometry have been studied. The optimal wavelength interval(${\triangle}{\lambda}$) for synchronous spectra of acenaphthene, anthracene, benzo[a]anthracene, fluorene and pyrene were investigated in the presence of surfactants. The great enhancement of the fluorescence of these PAHs in Triton X-100 was obtained and optimal wavelength was 50 nm. The calibration curves in synthetic mixture solution of 5 PAHs were linear over the range from $1.0{\times}10^{-8}M$ to $1.0{\tiems}10^{-4}M$. Under the optimal experimental conditions, the detection limits were $4.9{\tiems}10^{-9}M$,\;7.0{\times}10^{-9}M,\;4.7{\tiems}10^{-9}M,\;1.6{\tiems}10^{-9}M$ and $3.2{\tiems}10^{-9}M$ for acenaphthene, anthracene, benzo[a]anthracene, fluorene and pyrene, respectively.

• 환경영향평가
• /
• 제18권5호
• /
• pp.271-280
• /
• 2009

The objective of this study is to develop a reliable flow forecasting model based on neural network algorithm in order to provide flow rate at stream sections without flow measurement in Nakdong river. Stream flow rate measured at 8-days interval by Nakdong river environment research center, daily upper dam discharge and precipitation data connecting upstream stage gauge were used in this development. Back propagation neural network and multi-layer with hidden layer that exists between input and output layer are used in model learning and constructing, respectively. Model calibration and verification is conducted based on observed data from 3 station in Nakdong river.