• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.684_685
• /
• 2009

A digital sampling algorithm that uses a two high resolution integrating Voltmeters which are synchronized by Phase Lock Loop (PLL) time clock for accurately measuring the parameters, active and reactive power, for sinusoidal power measurements is presented. The PLL technique provides high precision measurements, root mean square (rms), phase and complex voltage ratio, of the AC signal. The system has been designed to be used at the Korean Research Institute of Standards and Science (KRISS) as a reference power standard for electrical power calibrations. The test results have shown that the accuracy of the measurements is better than $10 {\mu}W/VA$ and the level of uncertainty is valid for the power factor range zero to 1 for both lead and lag conditions. The system is fully automated and allows power measurements and calibration of high precision wattmeters and power calibrators at the main power frequencies 50 and 60 Hz.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.13-15
• /
• 2001

Compression test has been used to measure material flow stress due to limited capability of tensile test at the fast strain rate. Since the frictional stress unavoidable during compression test should be properly eliminated from the measured stress, calibration of the measured stress by using friction factor has been made for the flow stress measurement. Also, calibrated stresses by interrupted and continuous compression tests have been compared with the true stress measured by tensile test at $0.2\%$ carbon steel.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.239-242
• /
• 2006

Impervious surface is an important index for the estimation of urbanization and environmental change. In addition, impervious surface has an influence on the parameters of rainfall-runoff model during rainy season. The increase of impervious surface causes peak discharge increasing and fast concentration time in urban area. Accordingly, impervious surface estimation is an important factor of urban rainfall-runoff model development and calibration. In this study, impervious surface estimation is performed by using remote sensing images such as landsat-7 ETM+ and high resolution satellite image and regression tree algorithm based on case study area ? Jungnang-cheon basin in Korea.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1215-1219
• /
• 2008

수공구조물 설계에 있어 가장 중요한 기준이 되는 확률강우량은 기존에 발생한 시간강우와 일강우 자료를 이용하여 지속시간별 연최대치 계열을 빈도해석하여 수행하고 있다. 현재 기상청에서 제공하는 강우자료는 00시 00분부터 01시 00분까지 누적된 강우량을 01시 강우량으로 제공하고 있다. 이는 한 호우 사상에서 총강우량은 동일할지 모르지만, 강우의 발생별 시점, 종점 및 누적 강우량은 다르게 산정된다. 이와 같이 확률강우량 산정시 고정시간 강우자료를 수문학적 의미인 임의 지속시간별 강우량자료로 변환이 필요하다. 따라서, 본 연구에서는 37개 지점의 1분 단위 강우 관측자료를 이용하여 고정시간별 연 최대치 계열과 임의 지속시간별 연 최대치 계열을 추출한 후 두 자료에 따른 지속시간별 환산계수를 산정하였으며, 기존에 산정된 환산계수와 비교 분석하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.277-287
• /
• 1996

Based on the developments of the reliability-based steel structural analysis and design as well as the extending knowledgy on the probabilitic characteristics of loading and resistance the probability based design criteria have been successful Iy developed for many students. The existing design codes, which are genarally based on the structural theory and certain engineering experience, do not realistically consider the uncertainties of loads and resistance and the basic reliability concepts. It is recognized to develope the design criteria by ETCM(Expected Total cost Minimization). In this study, therefore, the proper probability based design criteria (Optimum load and resistance factor design formats ) has been developed based on the safety levels observed from calibration Iii th existing standards, which applies to the ultimate limit states of steel structural members.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.675-678
• /
• 2005

Cement paste is originally the basic material and crucial factor consisting concrete. This study investigates the relationship between flow apparatuses, which are ring flow, flow cone and mini slump, in order to estimate the fluidity of cement paste. For quantitatively evaluating the measured data, this study also analyses the calibration of the rheology consistents of cement paste using viscometer. For this purpose, the present work discusses the influence of the differences of companies and ingredients, affecting the fluidity of cement paste

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.335-337
• /
• 1993

Offset voltage and drift characteristics of operational amplifier are critical factor to precision AID conversion System. In this study, a method is suggested to design the programmable A/D conversion system which has high resolution and low drift characteristics. First, hardware was designed to reduce the offset voltage of integrator and comparator, and analog switches are connected to reduce the drift characteristics of operational amplifier. And then, a calibration software technique was performed to obtain the stable data from A/D converter. The main advantage of our method is high precision A/D converter can be constructed with low cost and high confidence. Therefore proposed method is expected to be used in the industrial field where a high precision measurement is required.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2009년도 춘계학술대회
• /
• pp.269-270
• /
• 2009

This study builds a sediment rating curve using the measured sediment yield and the simulated soil erosion by a GIS-embedded empirical model. Then the structured sediment rating curve is used to determine the SDR on a basin scale in southern Korea. The whole data(year of 2002-2008) are divided into two groups and the first group(year of 2002-2005) is used for calibration, while the other is used for validation. Two cases(rainfall amount and rainfall intensity) are analyzed to consider the rainfall runoff erosivity factor in simulating soil erosion. The results show the derived SDR provides reasonable accuracy and rainfall intensity gives better performance in calculating soil erosion than rainfall amount.

• 한국의학물리학회지:의학물리
• /
• 제4권2호
• /
• pp.3-7
• /
• 1993

1986년 11월에 Fiji의 수도 Suba에서 개최된 제7차 APMP 준비위원회 회의에서 한국표준과학연구원이 전리방사선 측정의 지역상호비교 프로그램을 주관하도록 결정되었다. KRISS의 방사선연구실은 공식적인 서신교환을 통하여 Australia, China, India, Japan 그리고 Malaysia등 5개국이 X-선 선량계측표준의 지역상호비교 연구에 참여할 수 있는 계기를 마련하였다.

• 한국광학회지
• /
• 제5권2호
• /
• pp.191-197
• /
• 1994

본 연구에서는 물체의 형상을 측정하기 위하여 사용할 수 있는 여러 가지 방법중 위상이동법을 이용하여 주어진 물체의 형상을 재구성하였다. 투영하는 직선형 무늬는 Twyman-Green 간섭계를 이용하여 발생시켰고 PZT를 이용하여 이들 무늬를 공간적으로 이동시켰다. Hariharan의 위상복구 알고리즘을 사용하여 시료에 투영된 간섭무늬 영상을 해석하여 주어진 시료의 형상을 보정 상수의 범위이내로 재현할 수 있음을 보였다. 그러나 레이저광의 높은 가간섭성에 의한 여러잡음 성분들에 의한 부작용이 관찰되었으며, 정확한 보정의 문제도 주목되었다.