• 한국항공우주학회지
• /
• 제40권3호
• /
• pp.230-236
• /
• 2012

본 연구의 목적은 풍동 시험부의 속도산출에 필요한 속도측정시스템용 교정계수를 실험적으로 결정하는데 있었다. 교정실험은 국방과학연구소 저속풍동에서 표준 피토관을 이용하여 수행되었으며 이때의 교정속도 영역은 약 10~100 m/s이었다. 풍동교정실험결과의 유효성 평가를 위해 기존의 교정계수 측정결과와의 비교검토를 수행하였으며, 기존 교정 결과들과 잘 부합됨을 확인하였다.

• 대기
• /
• 제25권3호
• /
• pp.521-528
• /
• 2015

In this study star photometry was applied to retrieve aerosol optical thickness (AOT) at night. The star photometry system consisted of small refractor, optical filters, CCD camera, and driving mount and was located in Suwon. The calibration constants were retrieved from the astronomical Langley method but standard deviations of these were more than 10% of the mean values. After the calibration the nighttime AOT was retrieved and cloud-screened in clear six days from 25 Nov. 2014 to 17 Jan. 2015. To estimate the quality of the measurements the nighttime AOT was combined with daytime AOT retrieved from sky-radiometer that was located in Seoul and 17 km away from the star photometry system. In spite of the uncertainty of the calibration constants and the spatial difference of two observation systems, the temporal changes of the nighttime AOT coincided with the daytime. The nighttime ${\AA}ngstr{\ddot{o}}m$ exponent was about 20% lower and more variable than the daytime because of the uncertainty of the calibration constants. If the calibration process is more precise, the combination of star and sun or sky photometry system can monitor the air pollution day and night constantly.

• 한국정밀공학회지
• /
• 제24권6호
• /
• pp.96-104
• /
• 2007

Calibration of the spring constants of atomic force microscopy (AFM) cantilevers is one of the issues in biomechanics and nanomechanies for quantified force metrology at pieo- or nano Newton level. In this paper, we present an AFM cantilever calibration system: the Nano Force Calibrator (NFC), which consists of a precision balance and a one-dimensional stage. Three types of AFM cantilevers (contact and tapping mode) with different shapes (beam and V) and spring constants (42, 1, 0.06 N $m^{-1}$) are investigated using the NFC. The calibration results show that the NFC can calibrate the micro cantilevers ranging from 0.01 ${\sim}$ 100 N $m^{-1}$ with relative uncertainties of less than 2%.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.59-62
• /
• 2005

Small force measurements ranging from 1 pN to $100{\mu}N$, we call it Nano Force, become the questions of common interests of biomechanics, nanomechanics, material researches, and so on. However, unfortunately, quantitative and accurate force measurements have not been taken so far. This is because there ,are no traceable force standards and a calibration scheme. This paper introduces a quantitative force metrology, which provides traceable link to SI (International Systems of Units). We realize SI traceable force ranging from 1 nN to $100{\mu}N$ using an electrostatic balance and disseminate it through transfer standards, which are self-sensing cantilevers that have integrated piezoresistive strain gages. We have been built a prototype electrostatic balance and Nano Force Calibrator (NFC), which is an AFM cantilever calibration system. As a first experiment, we calibrated normal spring constants of commercial AFM cantilevers using NFC. Calibration results show that the spring constants of them are quite differ from each other and nominal values provided by a manufacturer (up to 240% deviation).

• Journal of Radiation Protection and Research
• /
• 제6권1호
• /
• pp.41-44
• /
• 1981

A method is presented by which precise evaluation of radioactive concentrations in liquid or gaseous effluent released from large nuclear facilities is possible. Calculations have been made of the calibration constants at different energies for a commonly used liquid and gaseous effluent monitors as well. It is expected that the method could be applicable to the particular monitors with different geometrical configuration with simple modifications.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.693-696
• /
• 1998

For camera calibration, this paper describes two steps to camera constants and camera parameters. The former is the radial distortion of lens, image center and focal length etc.. The latter is translation, rotation etc.. Camera calibration use tsai's algorithm. In this paper, the solutions are introduced into overdetermined system as matching points that are acquired from two CCD and measured object depth information.

• 한국정보통신학회논문지
• /
• 제18권5호
• /
• pp.1096-1102
• /
• 2014

적외선 조명을 이용한 간접시선추적 시스템에서는 촬영된 이미지에서 동공에 반사된 조명의 위치에 대한 캘리브레이션이 필수적이다. 하지만 안구의 크기나 머리의 위치에 따라 달라질 수도 있는 변수가 캘리브레이션 과정에서 정의된 상수로 계산에 포함되어 있어 오차를 감소시키는데 한계가 있다. 본 논문은 적외선 조명을 사용하면서도, 사용자 캘리브레이션 과정을 생략할 수 있는 방법을 연구한다. 반사각에 의한 글린트(glint)위치 차이에 영향을 받지 않게 하면서, 시스템의 모델과 시선 계산은 단순하게 하여 실시간 연산이 가능하도록 하는 것이 목표이다.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1452-1461
• /
• 2020

A triple bubbler sensor was tested in LiCl-KCl molten salt from 450 to 525 ℃ in a transparent furnace to validate thermal-expansion corrections and provide additional molten salt data sets for calibration and validation of the sensor. In addition to these tests, a model was identified and further developed to accurately determine the density, surface tension, and depth from the measured bubble pressures. A unique feature of the model is that calibration constants can be estimated using independent depth measurements, which allow calibration and validation of the sensor in an electrorefiner where the salt density and surface tension are largely unknown. This model and approach were tested using the current and previous triple bubbler data sets, and results indicate that accuracies are as high as 0.03%, 4.6%, and 0.15% for density, surface tension, and depth, respectively.

• 한국분말재료학회지
• /
• 제13권6호
• /
• pp.455-461
• /
• 2006

High temperature dielectric constants of the various ceramic materials have been measured using cavity perturbation method. The measurements were applied to refractory, traditional and fine ceramic powder compacts from room temperature to $1200^{\circ}C$. Calibration constant in the equation suggested by Hutcheon et al., was determined from the dielectric constants of reference specimen (teflon and alumina) at room temperature. From these results, informations on the refectory materials were obtained for the microwave kiln design and understanding of the microwave heating effects of ceramics have been improved.

• 지질공학
• /
• 제8권2호
• /
• pp.189-203
• /
• 1998

상업용 Packer를 이용하여 시추공내에서 암반의 변형율 측정 할 수 있는 Dilatometer방법을 개발하였다. 직경 0.5인치, AX, BX, NX 및 HX크기의 시추 공에서 사용 할 수 있는Packer-dilatometer를 개발하여 현장에서 암반 변형율을 측정하였다. 본 방법은 Packer에 의하여 시추 공 벽에 압력을 가하여 이때 발생된 암반의 변형을 Packer에 주입된 주입수의 양으로 측정하는 방법이다. 본 논문에서는 이방법의 이론적 해석, 장비, 시험방법 및 순서, Calibration 정수 산정을 위한 장비 및 방법, Contact pressure의 측정 및 이를 이용한 현장조사 결과에 대한 연구 내용을 기술 하였다.