• 대한방사선기술학회지:방사선기술과학
• /
• 제43권4호
• /
• pp.265-272
• /
• 2020

The purpose of this study was to investigate the dose-volume indices and radiobiological indices according to the change in dose calculation grid size during the planning of nasopharyngeal cancer VMAT treatment. After performing the VMAT treatment plan using the 3.0 mm dose calculation grid size, dose calculation from 1.0 mm to 5.0 mm was performed repeatedly to obtain a dose volume histogram. The dose volume index and radiobiological index were evaluated using the obtained dose volume histogram. The smaller the dose calculation grid size, the smaller the mean dose for CTV and the larger the mean dose for PTV. For OAR of spinal cord, brain stem, lens and parotid gland, the mean dose did not show a significant difference according to the change in dose calculation grid size. The smaller the grid size, the higher the conformity of the dose distribution as the CI of the PTV increases. The CI and HI showed the best results at 3.0 mm. The smaller the dose calculation grid size, the higher the TCP of the PTV. The smaller the dose calculation grid size, the lower the NTCP of lens and parotid. As a result, when performing the nasopharynx cancer VMAT plan, it was found that the dose calculation grid size should be determined in consideration of dose volume index, radiobiological index, and dose calculation time. According to the results of various experiments, it was determined that it is desirable to apply a grid size of 2.0 - 3.0 mm.

• 한국의학물리학회지:의학물리
• /
• 제22권2호
• /
• pp.61-66
• /
• 2011

2D 어레이 다이오드 검출기를 이용하여 전립선과 두경부 IMRT 환자(전립선 2사례, 두경부 2사례)를 대상으로 선량계산 격자 크기(calculation grid size)에 따른 계산선량 정확성(dose calculation accuracy)을 평가했으며, 그 결과를 바탕으로 2D 어레이 다이오드가 IMRT 계산선량과 조사선량 검증에 적합한지 여부를 확인했다. 치료계획장치(treatment planning system, TPS)에서 제공되는 4종류의 격자 크기(1.25 mm, 2.5 mm, 5 mm, 10 mm) 별로 계산된 선량과 2D 어레이 다이오드 검출기를 이용하여 얻어진 측정선량을 감마 분석방법을 이용, 비교하는 방식으로 실험을 진행하였으며, 선량분포의 변화 범위에 따른 정확성 변화 또한 확인했다. 3 mm/3%의 평가기준(acceptance criteria)을 적용한 감마 분석방법에서는 10 mm를 제외한 격자 크기 별 평균 통과율(pass rate)에 뚜렷한 차이를 확인할 수 없었으나, 평가기준을 3 mm/3%, 2mm/2%, 1 mm/1%로 세밀하게 적용하였을 경우, 1.25 mm를 제외한 격자크기의 통과율이 각각 5%와 20%, 31.53% 감소하는 것을 확인할 수 있었다. 격자 크기에 따른 선량계산시간은 1.25, 2.5, 5, 10 mm 격자 크기에서 각각 11.5, 4.77, 2.95, 1.5 min 소비됐으며 격자 크기가 2배 증가할수록 선량계산시간은 약 1/2로 감소되는 결과를 확인할 수 있었다. 또한 저경사도영역(low gradient area)과 고경사도영역(high gradient area)을 구분하여 격자 크기영향을 평가하였으며, 격자 크기가 계산선량 정확성에 미치는 효과는 low gradient area보다 high gradient area에서 더 크게 작용한다는 결과를 확인했다. 본 연구의 결과를 종합해 봤을 때 2.5 mm의 격자 크기로 선량계산을 수행하는 것이 계산선량 정확성과 계산시간 면에서 적절한 것으로 여겨지며, high gradient area에 있어서는 가능한 세밀한 격자크기(1.25 mm)를 적용할 것이 권장된다. 또한 이상의 결과가 기존 연구의 이론 및 필름을 이용한 측정과 동일함을 고려해 봤을 때 2D 어레이 다이오드 검출기가 IMRT 계산선량과 조사선량 검증에 적합함을 확인할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.867-871
• /
• 2007

Noise map is very efficient tool to evaluate the road traffic noise. However, calculation time and accuracy of noise map heavily depend on the grid size of noise map. In this study, effects of grid size on the prediction results of road traffic noise map have been investigated in detail for urban and rural areas, respectively, and efficient grid size for the noise map has been proposed.

• 한국소음진동공학회논문집
• /
• 제20권2호
• /
• pp.199-204
• /
• 2010

Noise map is very efficient tool to evaluate the road traffic noise. However, calculation time and accuracy of noise map heavily depend on the grid size of noise map. In this study, effects of grid size on the prediction results of road traffic noise map have been investigated in detail for urban and rural areas, respectively, and efficient grid size for the noise map has been proposed.

• 한국분무공학회지
• /
• 제15권4호
• /
• pp.170-176
• /
• 2010

This paper describes the grid-size dependency of the conventional Eulerian-Lagrangian method to spray characteristics such as spray penetration and SMD in modeling DME sprays. In addition, the reduction of the grid-size dependency of the present Gas-jet model was investigated. The calculations were performed using the KIVA code and the calculated results were compared to those of experimental result. The results showed that the conventional Eulerian-Laglangian model predicts shorter spray penetration for large cell because of inaccurate calculation of momentum exchange between liquid and gas phase. However, it was shown that the gas-jet model reduced grid-size dependency to spray penetration by calculating relative velocity between liquid and ambient gas based on gas jet velocity.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.120-125
• /
• 2007

In this paper a new cell sizing method is proposed. The new method calculates cell size at a point using given size control elements directly without the aid of background grid as other cell sizing algorithms do. The calculation method and related definitions are described in detail, and typical cell sizing results are given.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 Proceedings of 2004 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.81-90
• /
• 2004

A zonal embedded grid technique has been developed for computation of the two-dimensional Navier-Stokes equations with cylindrical coordinates. The fundamental idea of the zonal embedded grid technique is that the number of azimuthal grids can be made small near the origin of the coordinates so that the grid size is more uniformly distributed over the domain than with the conventional regular-grid system. The code developed using this technique combined with the explicit, finite-volume method was then applied to calculation of the spin-up flows within a semi-circular cylinder. It was shown that the numerical results were in good agreement with the experimental results both qualitatively and quantitatively.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.68-73
• /
• 2007

Computational Fluid Dynamics (CFD) approach is now playing an important role in the engineering process in these days. Generating proper grid system in time for the region of interest is prerequisite for the efficient numerical calculation of flow physics using CFD approach. Grid generation is, however, usually considered as a major obstacle for a routine and successful application of numerical approaches in the engineering process. CFD approach based on the unstructured grid system is gaining popularity due to its simplicity and efficiency for generating grid system compared to the structured grid approaches, especially for complex geometries. In this paper an automated triangular surface grid generation using CAD(Computer Aided Design) surface data is proposed. According to the present method, the CAD surface data imported in the STL(Stereo-lithography) format is processed to identify feature edges defining the topology and geometry of the surface shape first. When the feature edges are identified, node points along the edges are distributed. The initial fronts which connect those feature edge nodes are constructed and then they are advanced along the CAD surface data inward until the surface is fully covered by triangular surface grid cells using Advancing Front Method. It is found that this approach can be implemented in an automated way successfully saving man-hours and reducing human-errors in generating triangular surface grid system.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1119-1126
• /
• 2021

Spacer grid with mixing vane had been widely used in nuclear reactor core. One of the main feather of spacer grid with mixing vane was that strong swirl flow was formed after the spacer grid. The swirl flow not only changed the bubble generation in the near wall field, but also affected the bubble behaviors in the center region of the subchannel. The interaction between bubble and the swirl flow was one of the basic phenomena for the two phase flow modeling in fuel assembly. To obatin better understanding on the bubble behaviors in swirl flow, full three dimension numerical simulations were conducted in the present paper. The swirl flow was assumed in the cylindral calculation domain. The bubble interface was captured by Volume Of Fluid (VOF) method. The properties of saturated water and steam at different pressure were applied in the simulation. The bubble trajectory, motion, shape and force were obtained based on the bubble parameters captured by VOF. The simulation cases in the present study included single bubble with different size, at different angular velocity conditions and at different pressure conditions. The results indicated that bubble migrated to the center in swirl flow with spiral motion type. The lateral migration was mainly related to shear stress magnitude and bubble size. The bubble moved toward the center with high velocity when the swirl magnitude was high. The largest bubble had the highest lateral migration velocity in the present study range. The effect of pressure was small when bubble size was the same. The prelimenery simulation result would be beneficial for better understanding complex two phase flow phenomena in fuel assembly with spacer grid.

• 한국지리정보학회지
• /
• 제20권1호
• /
• pp.137-151
• /
• 2017

도시표면의 건물정보는 빗물의 유출경로이며 또한 격자기반의 수치해석을 위한 빗물흐름과 건물 외곽을 구분하는 경계조건에 해당한다. 경계조건인 건물자료의 왜곡 최소화는 수치해석 결과의 사실성 확보를 위한 필수적 과정이다. 격자기반의 래스터 전환은 건물자료의 왜곡을 유발하기 때문에 왜곡의 정도를 완화시키기 위한 전처리로 건물 일반화가 필요하다. 본 연구의 목적은 건물 일반화가 일반주거지역의 빗물 유출경로 연속성에 미치는 영향을 분석하고 적정한 일반화 임계값과 수치해석 격자크기를 제시하고자 한다. 빗물 유출경로 연결성 평가를 위한 설명변수로는 일반화 임계값과 수치계산 격자크기를 사용하는 한편 종속변수로는 격자망의 단절 개수와 단절면적을 사용했다. 적정한 격자크기와 일반화 임계값 선정은 임의 격자크기와 임계값을 적용한 일반화 결과로부터 산출된 건물 면적 변화율과 단절 면적 변화율 각각을 비교하고 크기가 가장 낮은 것으로 하였다. 적정 임계값과 격자크기 범위는 각각 3m와 $5{\times}5m{\sim}10{\times}10m$ 이었다. 이를 적용한 결과 건물면적 증가율은 5%이하 그리고 단절면적 감소율은 94.4%이상이었다. 대상지 토지용도를 구분한 건물 일반화 모의 결과, 아파트 단지인 3종의 건물면적과 빗물 유출경로 연결성은 임계값 10m이하에서 크게 변하지 않았다. 한편 개별 주택인 2종 지역에서는 임계값 3m와 격자크기 $5{\times}5m$을 적용한 모의결과는 단절면적의 감소와 양호한 유출경로 연결성을 보였다.