• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.227-232
• /
• 2003

Usually, the thrust of a Linear Pulse Motor(LPM) is calculated by magnetic equivalent circuit modelling method. Analytical thrust deviation exists to calculating magnetic flux density by using Permeance Modelling Method, Finite Element Method, and Velocity Electric Motive Force Method. For calculating accuracy thrust by using these every method, the thrust is calculated and compared by Lorentz Force Method, Magnetic Coenergy Method, and Maxwell correspondence force Method. And that becomes important factor at the comparison of each capacity and parameter of motor. So this study wants to compare and analyze measurement data and calculating data of the static thrust of LPM. and then we can get more accuracy method, calculating the static thrust of LPM.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.304-307
• /
• 2003

Usually, the thrust of a Linear Pulse Motor(LPM) is calculated by magnetic equivalent circuit modelling method. Analytical thrust deviation exists to calculating magnetic flux density by using Permeance Modelling Method, Finite Element Method, and Velocity Electric Motive Force method. For calculating accuracy thrust by using these every method, tire thrust is calculated and compared by Lorentz Force method, Magnetic coenergy Method, and Maxwell correspondence forte Method. And that becomes Important factor at the comparison of each capacity and parameter of motor. So this study wants to compare and analyze measurement data and calculating data of the static thrust of LPM. and then we can get more accuracy method, calculating the static thrust of LPM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.933-935
• /
• 2001

This paper presents a calculating method for inductance of the Switched Reluctance Motor(SRM) for torque characteristics and driving by analytical model. The approaches for calculating inductance have taken vary from detailed finite element analysis(FEA) and Fitting method in magnetization curves using complex nonlinear magnetic circuit models. But those methods have not satisfactory approach for machine performance calculations, because of having a long time and remodeling for analyses, therefore thus an alternative approach is required. So it is suggested simply calculating method of the inductance based on designed data of machinery by analytical model in unaligned and aligned rotor. In order to prove the calculating, there are compare with analytical FEM, direct measurement, this method, and simulation. The compared result is shown to obtain good accuracy.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.23-29
• /
• 2013

PURPOSES: This paper aims to give a guideline and the way to apply the advanced composite materials theory to the road structures with different cross sections to the practicing engineers. METHODS: To simple but exact method of calculating natural frequencies corresponding to the modes of vibration of road structures with different cross sections and arbitrary boundary conditions. The effect of the $D_{22}$ stiffness on the natural frequency is rigorously investigated. RESULTS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. CONCLUSIONS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. This method is a simple but exact method of calculating natural frequencies of the road structures with different cross sections. This method is extended to be applied to two dimensional problems including composite laminated road structures.

• 패션비즈니스
• /
• 제1권4호
• /
• pp.49-54
• /
• 1997

Methods of the flare skirt pattern making are presented variously among foreign and domestic test books. Three of them are : First the method is using the basic skirt pattern, secondly the method is quartering rectangle of skirt length $\times\frac{W}4$, finally the method is substituting waist size for formula. But, these books don't include the calculating method of the hem circumference. This calculating method express the shape of flare skirt and the using length of trimming -race and frill-. This study aims at proposing the calculating formula of the hem circumference and the standardization of pattern making technical skill. The result were as follows. 1. The calculating formula of hem circumference had regular ratio in $180^{\circ}$, $270^{\circ}$ and $360^{\circ}C$ flare. That was (HEM) = $(\frac{(5\;{\times}\;(W\;+\;1)}{4\;{\times}\;A}+(SK.L))\;{\times}\;A\;{\times}\;0.785$. A was 4 in $180^{\circ}$, 6 in $270^{\circ}$, 8 in $360^{\circ}$. 2. The error of hem circumference from 46 to 86 centimeter of waist size was between 0.11875 and -0.63125 centimeter in $180^{\circ}$, $270^{\circ}$ and $360^{\circ}$ flare skirt. This formula was less in the error.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.137-140
• /
• 2002

The algorithm for calculating the base-collector breakdown voltage of NPN BJT(Bipolar Junction Transistor) for integrated circuits is proposed. The method for calculating the electric field using the solution of Poisson's equation is presented and the method for calculating the breakdown voltage using the integration of ionization coefficients is presented. The base-collector breakdown voltage of NPN BJT using 20V process obtained from the proposed method shows an averaged relative error of 8.0% compared with the measured data.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.3-7
• /
• 2003

Usually, the thrust is calculated by magnetic equivalent circuit modelling method for thrust capacity and accuracy progress of position control about a Linear Pulse Motor of which position precision is good and open-loop control is possible within Linear Motors. Analytical thrust deviation exists to calculating magnetic flux density by using Permeance Modelling Method, Finite Element Method, and Velocity Electric Motive Force Method. For calculating accuracy thrust by using these every method, the thrust is calculated and compared by Lorentz Force Method, Magnetic Coenergy Method, and Maxwell correspondence force Method. And that becomes important factor at the comparison of each capacity and parameter of Motor. So this study wants to compare and analyze measurement data and calculating data of the static force of Linear Pulse Motor. and then we can get more accuracy method, calculating the static thrust of Linear Pulse Motor(LPM).

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권2호
• /
• pp.67-73
• /
• 2003

The algorithm (or calculating the base-collector breakdown voltage of NPN BJT(Bipolar Junction Transistor) for integrated circuits is Proposed. The method for calculating the electric field using the solution of Poisson's equation is presented and the method for calculating the breakdown voltage using the integration of ionization coefficients is presented. The base-collector breakdown voltage of NPN BJT using 20V process obtained from the proposed method shows an averaged relative error of 8.0% compared with the measured data and the base-collector breakdown voltage of NPN BJT using 30V process shows an averaged relative error of 4.3% compared with the measured data

• 전력전자학회논문지
• /
• 제6권4호
• /
• pp.333-340
• /
• 2001

본 연구는 SRM의 토크 특성해석과 구동에 필요한 인덕턴스의 산정에 관한 연구이다. SRM의 토크 특성은 인덕턴스 와 전류의 변화로서 나타 낼수 있으나, 자기회로의 비선형적인 특성으로 정확한 인덕턴스 산정은 어려움이 있다. 최근에는 인덕턴스 산정을 위하여 FEM해식이나 피팅계수법이 많이 적용되고 있다. 그러나 FEM에 의한 방법은 많은 시간이 소요되며 구조변경에 따라 재해석이 요구되어진다. 피팅 계수법에 의한 방법은 측정된 인덕턴스에 의해 추정되는 값임으로 초기의 측정이나 해석에는 어려움이 따른다. 본 논문에서는 설계시 얻어지는 간단한 기계구도의 치수를 이용하여 계산에 의한 인덕턴스를 산정하는 간단한 기계구조의 치수를 이용하여 계산에 의한 인덕턴스를 산정하는 간단한 모델과 방법을 제시하였다. 제시된 산정방법의 검증을 위하여 연구 제작된 1[Hp]전동기에 적용하여 FEM해석과 측정에 의한 방법을 각각 비교 검토하였다.

• 한국IT서비스학회지
• /
• 제5권1호
• /
• pp.47-59
• /
• 2006

According to the policy for "e-Korea construction" of Korean government, Investment of information system during the past decade are dramatically increasing. More than a half of this investment is cost of hardware infrastructure. So, accurate hardware sizing are essential for higher efficiency of investment. Accurate hardware sizing benefits are generally viewed in terms of the avoidance of excess equipment and lost opportunity costs by not being able to support business needs. Unfortunately, however, little research effort to make the hardware sizing methodology are doing. We propose a sizing method for information system in public sector. This method is determinate empirical study that are gathering and analyzing cases, making method and reviewing expert. Finally we are proposed calculating method for hardware components that is CPU, memory, internal and external disk according to the application system type which is OLTP, Web, WAS. Our study certainly will act as a catalyst for higher investment-efficiency of the future information programs in public sector.