• 제목/요약/키워드: Calculating Area

검색결과 778건 처리시간 0.031초

개발권양도제 적용방안에 관한 연구 - 광주광역시 주거지를 중심으로 - (A Study on Application Methods of the Transfer of Development Rights - Focused on Residential Areas of Gwangju -)

  • 정우곤
    • 한국주거학회논문집
    • /
    • 제23권5호
    • /
    • pp.61-73
    • /
    • 2012
  • This study applied the value of floor-area-ratio standard calculation method to case areas and analyzed them to overcome the limits of previous studies in calculation methods for area standards and land price (value) standard development rights. The results are presented as follows: First, criteria to select sending areas and receiving areas are needed. Second, calculation methods based on the value of floor-area-ratio standard can be widely used as standardized criteria in various areas. Third, for the connection of sending areas with receiving areas, the connections of 1:1, n:1, 1:n, and n:n are available and the location of possible dealing areas should be considered. Also, the choice of connecting unions that meet the purpose of TDR presented by local governments is available. Fourth, for Gwangju, as receiving areas downtown provide higher profits than previous renewal projects, the application of TDR is available. Application methods to overcome problems are presented as follows: First, criteria to select sending and receiving areas should be prepared and implemented in an order of priority. Second, in calculating development rights, methods based on the value of floor-area-ratio standard should be used. Third, the standards and principles of sending and receiving areas should be designated and possible dealing areas should not be limited.

암석코어시편의 절리면 직접전단시험을 위한 겉보기 면적 계산방법 (Calculation Method for Nominal Area of Rock Core Specimen During Direct Shear Test)

  • 강훈;박정욱;박찬;오태민;조정우
    • 터널과지하공간
    • /
    • 제30권6호
    • /
    • pp.551-558
    • /
    • 2020
  • 기존 시험법은 암석시편의 절리면 직접전단시험시 겉보기 면적의 변화를 고려해야 한다고 명시하고 있다. 본 기술보고는 암석코어 시편의 절리면 직접전단시험시 겉보기 면적 계산방법을 제시하였다. 암석코어 시편의 초기 절리면을 타원으로 가정하고, 타원의 중첩면적 감소를 계산하는 수식을 정리하였다. 전단변위와 겉보기 면적을 정규화하면 타원형상에 관계없이 일정한 변화 비율을 가지는 것을 확인하였다. 암석코어 시편 전단시험을 위한 정규화 실험상수를 제안하여 일반화된 계산방법을 제안하였다. 그 방법을 실제 전단시험의 데이터에 적용하여 결과 변화값을 확인하고, 정확도에 대해 간략히 토의하였다.

에너지 감쇠역을 포함하는 파랑장에 대한 반복기법의 적용 (Application of Iterative Procedure to the wave Field with Energy Dissipation Area)

  • 윤종태
    • 한국해양공학회지
    • /
    • 제12권1호
    • /
    • pp.120-127
    • /
    • 1998
  • An Elliptic model for calculating the combined refraction/diffraction of monochromatic linear waves is developed, including a term which allows for the dissipation of wave energy. Conjugate gradient method is employed as a solution technique. Wave height variations are calculated for localized circular and rectangular dissipation areas. It is shown that the numerical results agree very well with analytical solution in the case of circular damping region. The localized dissipation area creates a shadow region of low wave energy and the recovery of wave height by diffraction occurs very slowly with distance behind the damping region.

  • PDF

3-D Dynamic groundwater-river interaction modeling incorporating climate variability and future water demand

  • Hong, Yoon-Seok Timothy;Thomas, Joseph
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2008년도 학술발표회 논문집
    • /
    • pp.67-74
    • /
    • 2008
  • The regional-scale transient groundwater-river interaction model is developed to gain a better understanding of the regional-scale relationships and interactions between groundwater and river system and quantify the residual river flow after groundwater abstraction from the aquifers with climate variability in the Waimea Plains, New Zealand. The effect of groundwater abstraction and climate variability on river flows is evaluated by calculating river flows at the downstream area for three different drought years (a 1 in 10 drought year, 1 in 20 drought year, and 1 in 24 drought year) and an average year with metered water abstraction data. The effect of future water demand (50 year projection) on river flows is also evaluated. A significant increase in the occurrence of zero flow, or very low flow of 100 L/sec at the downstream area is predicted due to large groundwater abstraction increase with climate variability. Modeling results shows the necessity of establishing dynamic cutback scenarios of water usage to users over the period of drought conditions considering different climate variability from current allocation limit to reduce the occurrence of low flow conditions at the downstream area.

  • PDF

쌍곡선항법시스템을 이용한 직각항법에 의한 측위정도 향상에 관한 연구 (A Study on the Position Accuracy Improvement Applying the Rectangular Navigation in the Hyperbolic Navigation System Area.)

  • 김우숙;김동일;정세모
    • 한국항해학회지
    • /
    • 제13권1호
    • /
    • pp.1-10
    • /
    • 1989
  • Nowadays Hyperbolic Navigation System-LORAN, DECCA, OMEGA, OMEGA-is available on the ocean, and Spherical Navigation System, GPS (Global Positioning System) is operated partially. Hyperbolic Navigation System has the blind area near the base line extention because divergence rate of hyperbola is infinite theoretically. The Position Accuracy is differ from the cross angle of LOP although each LOP has the same error of quantity. GDOP(Geometric Dilution of Precisoin) is used to estimate the position accuracy according to the cross angle of LOP and LOP error. Hyperbola and ellipse are crossed at right angle everywhere. Hyperbola and ellipse are used to LOP in Rectangular Navigation System. The equation calculating the GDOP of rectangular Navigation System is induced and GDOP diagram is completed in this paper. A scheme that can improve the position accuracy in the blind area of Hyperboic Navigation System using the Rectangular Navigation System is proposed through the computer simulation.

  • PDF

불포화 다공성 매질체의 공기-물 경계면 비표면적 계산모델 분석 (Analysis of Calculation Model for Specific Air-water Interface Area in Unsaturated Porous Media)

  • 김민규;김성배;박성직
    • 한국농공학회논문집
    • /
    • 제48권5호
    • /
    • pp.83-93
    • /
    • 2006
  • In unsaturated porous media, the air-water interface (AWI) plays an important role in removing of biocolloids such as bacteria, viruses, and protozoan (oo)cysts. In this study, four models related to calculation of specific AWI area are analyzed to determine the appropriate model, and the selected models are verified using the previously reported experimental data. The results indicate that the modified model from Niemet et al. (2002) is the most appropriate tool for calculating the specific AWI area using the van Genuchten (1980) parameters obtained from the water retention curve. Hence, it is expected that this model could be used to quantitatively determine the attachment of biocolloids to AWI in the transport modeling of biocolloids in unsaturated porous media.

분기관을 이용한 피스톤 펌프의 압력 맥동에 관한 연구 (A Study on Pressure Ripple of Axial Piston Pump using Branch Hose)

  • 이홍선;임태형;천세영;권순광;이창돈;양순용
    • 한국공작기계학회논문집
    • /
    • 제16권6호
    • /
    • pp.117-124
    • /
    • 2007
  • The pressure ripple in most hydraulic systems is the root cause of their noise and vibration. This paper reduced the pressure ripple using side branch hose for an axial piston pump applied to small excavator. First, in calculating open area, a new method using groove area of valve plate is proposed. Simulation model in AMESim environment is developed to verify proposed method, find effective length and diameter of branch hose. Finally, the comparisons with experiment results show that the proposed method is more effective than previous method in reducing the pressure ripple.

Proposed approach for determination of tributary areas for scattered pressure taps

  • Aly, Aly Mousaad
    • Wind and Structures
    • /
    • 제16권6호
    • /
    • pp.617-627
    • /
    • 2013
  • In wind load calculations based on pressure measurements, the concept of 'tributary area' is usually used. The literature has less guidance for a systematic computational methodology for calculating tributary areas, in general, and for scattered pressure taps, in particular. To the best of the author's knowledge, there is no generic mathematical equation that helps calculate the tributary areas for irregular pressure taps. Traditionally, the drawing of tributary boundaries for scattered and intensively distributed taps may not be feasible (a time and resource consuming task). To alleviate this problem, this paper presents a proposed numerical approach for tributary area calculations on rectangular surfaces. The approach makes use of the available coordinates of the pressure taps and the dimensions of the surface. The proposed technique is illustrated by two application examples: first, quasi-regularly distributed pressure taps, and second, taps that have scattered distribution on a rectangular surface. The accuracy and the efficacy of the approach are assessed, and a comparison with a traditional method is presented.

전기자동차 운행을 위한 태양광발전소 수요 예측 (Prediction of Demand for Photovoltaic Power Plants for Electric Vehicle Operation)

  • 최회균
    • 한국태양에너지학회 논문집
    • /
    • 제40권4호
    • /
    • pp.35-44
    • /
    • 2020
  • Currently, various policies regarding ecofriendly vehicles are being proposed to reduce carbon emissions. In this study, the required areas for charging electric vehicle (EV) batteries using electricity produced by photovoltaic (PV) power plants were estimated. First, approximately 2.4 million battery EVs, which represented 10% of the total number of vehicles, consume approximately 404 GWh. Second, the power required for charging batteries is approximately 0.3 GW, and the site area of the PV power plant is 4.62 ㎢, which accounts for 0.005% of the national territory. Third, from the available sites of buildings based on the region, Jeju alone consumes approximately 0.2%, while the rest of the region requires approximately 0.1%. Fourth, Seoul, which has the smallest available area of mountains and farmlands, utilizes 0.34% of the site for PV power plants, while the other parts of the region use less than 0.1%. The results of this study confirmed that the area of the PV power plant site for producing battery-charging power generated through the supply of EVs is very small. Therefore, it is desirable to analyze and implement more specific plans, such as efficient land use, forest damage minimization, and safe maintenance, to expand renewable energy, including PV power.

The Estimation of the Coverage Probability in a Redundant System with a Control Module

  • Lim, Jae-Hak
    • 한국산업정보학회논문지
    • /
    • 제12권1호
    • /
    • pp.80-86
    • /
    • 2007
  • The concept of the coverage has been played an important role in the area of reliability evaluation of a system. The widely used measures of reliability include the m time between failures, the availability and so on. In this paper, we propose an estimator of the coverage probability in a redundant system with a control unit and investigate some moments of the proposed estimator. And assuming exponential distribution of all units, we conduct a simulation study for calculating the estimates of the coverage probability and its confidence bounds. An example of evaluating the availability of an optical transportation system is illustrated.

  • PDF