• Architectural research
• /
• v.12 no.2
• /
• pp.93-98
• /
• 2010

This paper describes a numerical method for estimating the elastic moduli of cement paste. The cement paste is modeled as a unit cell which consists of three components: the unhydrated cement grain, the gel, and the capillary pore. In the unit cell, the volume fractions of the constituents are quantified using a single kinetic function calculating the degree of hydration. The elastic moduli of cement paste are calculated from the total displacements of constituents when a uniform pressure is applied to the gel contact area. The cement paste is assumed to be a homogenous isotropic matrix. Numerical simulations were conducted through the finite element analysis of the three-dimensional periodic unit cell. The model predictions are compared with experimental results. The predicted trends are in good agreement with experimental observations. This approach and some of the results might also be relevant for other technical applications.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.260-264
• /
• 2005

Effective use of water resources has become a social problem because the deficit of water comes from population growth and Industrial development. Therefore, the conjunctive operation of surface water and groundwater will become an alternative. Groundwater has many advantages for the evaporation and effect of rainfall compared with surface water. Although the available amount of groundwater is small, groundwater dam can be used complementarily because of the sustainable supply of water. A calculating technique of the optimal amount of water resources by the groundwater dam was developed. A pilot site was selected to assess the optial amount of groungwater for the designed groungwater dam. If the developed technique is more refined by the measured data, the groundwater dam will become a good alternative to develope the water resources in the water deficit area.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.519-521
• /
• 2005

In recent years, LiDAR(Light Detection and Ranging) data has been widely used to prepare digital elevation models(DEMs) with the high spatial resolution of centi-meters. This paper investigated possible applications of LiDAR-derived DEMs in surface hydrology modeling, such as characterizing flow direction, identifying sub-basins in a watershed, and calculating variables like upstream contribution area. The results were compared to the results of the DEMs from conventional topographic maps.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.272-275
• /
• 2005

The digital map expresses natural topographies and artificial things with 3D position coordinates in the computer such as the road, railway, building, river, mountain, paddy and dryland. Therefore, the digital map is regarded as an important factor in the information-oriented society. However, it is difficult to maintain the most recent topographic information all the times because of restricted budget and time. For that, the efficient method corresponded with the digital map should be presented. This study aims to suggest the way to make an estimate of updating cost for 1:5,000 scale digital map by using remotely sensed data. To predict updating area of the digital map, the screen digitizing method was applied to the overlapped images and digital maps.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.116-120
• /
• 2011

Radioelement ratios are useful for mapping subtle variations in radiometric signatures in map data. But the conventional method for calculating radioelement ratios has the significant limitation that if just one of the radioelements comprising the ratio has a small spread of concentration estimates relative to its mean, then it will not contribute significantly to the ratio map. However, if both the numerator and denominator are first normalised to approximately the same mean and spread prior to ratioing, then they will contribute equally to the enhancement of the differences between them across the map area.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.437-449
• /
• 1997

To predict diffusion and movement of k pollutants In coastal urban region a numerical simulation shouts be consider atmospheric flow field with land-sea breeze, mountain-valley wand and urban effects. In this study we used Lagrangian [article dispersion method In the atmospheric flow field of Pusan coastal region to depict diffusion and movement of the Pollutants emoted from particular sources and employed two grid system, one for large scale calculating region with the coarse mesh grid (CMG) and the other for the small region with the One mesh 914 (FMG). It was found that the dispersion pattern of the pollutants followed local circulation system in coastal urban area and wale air pollutants exhausted from Sasang moved Into Baekyang and Jang moutain, air pollutants from Janglim moved into Hwameong-dong region.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.686-687
• /
• 2011

In this paper, the method on calculating benefits of combined heat and power is introduced for standard evaluation in electrical power system. This paper calculates benefits about new national viewpoint and viewpoint of independent power producers and assesses benefits of combined heat and power in Korea and In Seoul national capital area. Benefit costs are composed of avoid cost of centralized generation, line upgrading adjustment, loss adjustment and electrical power trade cost per year in earlier study, in addition trade cost of CO2, construction cost of combined heat and power for accurate calculation. Benefit of combined heat and power is calculated by simulation results of real electrical power system.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.2
• /
• pp.123-140
• /
• 2007

This study focuses on establishing theoretically-reasonable framework of evaluation areas and items for the informatization program and analyzing the weights for each area and item by means of the AHP. To obtain the goal of this research, firstly, based on broadly reviewing previous literature and logical reasoning, the evaluation criteria were Identified and conceptualized, which were 3 evaluation phases, 5 evaluation areas, and 22 evaluation items. Secondly, The data used for calculating the weight values for the evaluation criteria were collected from 48 academic and practical experts in the field of the informatization program promotion using internet survey. Thirdly, the relative weights among evaluation phases, evaluation areas, and its items were derived by AHP analysis. The findings of this study are thought not only to be useful as a practical guideline in performing evaluating the informatization program but also to provide significant basis for constructing the theoretical framework of evaluating method and management of the informatization program.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.593-596
• /
• 1992

An evaluation method for the effective length of electromagnet - which bas U-shape in frontview and trapezoidal in side view - is presented. Using 2D FEM, 2 analysing models are introduced for calculating effective length of the magnet ; the front model is using the normalized equi-pole face area of the magnet and the side model using the normalized equi-magnetic circuit. The ratio of the effective length to the length of bottom plate (core) comes out 1.25 - 1.30. In addition, 3D FEM analysis has been done and a proto-type test model is manufactured to verify the analysing method. The ratio by the experiment appears 1.2, which is reasonably in good agreement with the suggested numerical results.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.4
• /
• pp.420-427
• /
• 2007

This paper highlights the comparison of a proposed methods named adaptive undervoltage load shedding based PTSI techniques for undervoltage load shedding and two previous methods named Fixed Shed Fixed Delay (FSFD) and Variable Shed Variable Delay (VSVD) for avoiding voltage collapse. There are three main area considerations in load shedding schemes as the amount of load to be shed, the timing of load shedding event, and the location where load shed is to be shed. The proposed method, named as adaptive UVLS based PTSI seem to be most appropriate among the uncoordinated schemes. From the simulation result can be shown the Adaptive UVLS based PTSI give faster response, accurate and very sensitive control for the UVLS control technique. This technique is effectively when calculating the amount to be shed. Therefore, it is possible to bring the voltage to the threshold value in one step. Thus, the adaptive load shedding can effectively reduce the computational time for control strategy.