• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3197-3206
• /
• 2011

The objective of this study is to provide the guide for producing data for effective analysis of weapons systems and munitions. Therefore, the prototype from the study of creating the effectiveness data of surface to surface Artillery system under different battle environments was developed in this paper. For this purpose, mathmatical method which is in use of calculating Lethal Area and EFC(Expected Fractional Casualty) is analyzed and applied to the prototype for generating effectiveness data of surface to surface Artillery system. To validate the suggested prototype, we did the following actions: we select the source data corresponding to JMEM(Joint Munition Effectiveness Manuals) data and apply our prototype to the source data, and then match the results to check validity.

• Steel and Composite Structures
• /
• v.33 no.3
• /
• pp.375-388
• /
• 2019

This paper aims to investigate the axial load behavior and stability strength of square tubed steel-reinforced concrete (TSRC) columns. Unlike concrete filled steel tubular (CFST) column, the outer steel tube of a TSRC column is mainly used to provide confinement to the core concrete. Ten specimens were tested under axial compression, and the main test variables included length-to-width ratio (L/B) of the specimens, width-to-thickness ratio (B/t) of the steel tubes, and with or without stud shear connectors on the steel sections. The failure mode, ultimate strength and load-tube stress response of each specimen were summarized and analyzed. The test results indicated that the axial load carried by square tube due to friction and bond of the interface increased with the increase of L/B ratio, while the confinement effect of tube was just the opposite. Parametric studies were performed through ABAQUS based on the test results, and the feasibility of current design codes has also been examined. Finally, a method for calculating the ultimate strength of this composite column was proposed, in which the slenderness effect on the tube confinement was considered.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.167-172
• /
• 2006

An image retrieval system retrieves and offers same of similar image based on various features of image. This paper present a brand image retrieval system based on color and shape of image. We use the image for a color information by dividing into the area and extracting the area color distribution histogram. We use for the shape information by preprocessing of the boundary extraction, the centroid extraction, angular sampling etc. and calculating of the sum of the distance from the centroid to the boundary, the standard deviation, and the rate of long axis to short axis. We accomplish the retrieval through a similarity measurement by using the color and shape information which is extracted in this way.

• Journal of Information Processing Systems
• /
• v.17 no.5
• /
• pp.1004-1019
• /
• 2021

To solve the problems of the low image contrast, fuzzy edge details and edge details missing in noisy image fusion, this study proposes a noisy infrared and visible light image fusion algorithm based on non-subsample contourlet transform (NSCT) and an improved bilateral filter, which uses NSCT to decompose an image into a low-frequency component and high-frequency component. High-frequency noise and edge information are mainly distributed in the high-frequency component, and the improved bilateral filtering method is used to process the high-frequency component of two images, filtering the noise of the images and calculating the image detail of the infrared image's high-frequency component. It can extract the edge details of the infrared image and visible image as much as possible by superimposing the high-frequency component of infrared image and visible image. At the same time, edge information is enhanced and the visual effect is clearer. For the fusion rule of low-frequency coefficient, the local area standard variance coefficient method is adopted. At last, we decompose the high- and low-frequency coefficient to obtain the fusion image according to the inverse transformation of NSCT. The fusion results show that the edge, contour, texture and other details are maintained and enhanced while the noise is filtered, and the fusion image with a clear edge is obtained. The algorithm could better filter noise and obtain clear fused images in noisy infrared and visible light image fusion.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.10
• /
• pp.55-61
• /
• 2018

Changes in consumer purchasing patterns due to construction of large Western-style commercial buildings and introduction of new purchasing methods in South Korea in the 1990s led to a gradual decline in traditional markets. Under such a new environment, Yukgeori market, one of Korea's exemplary markets, has continued to develop and survive, while maintaining the traditional market form of Korea, both physically and operationally. Therefore, to find the characteristics of spatial configurations supporting the revitalization of traditional market, we deduced social attributes of spaces in street network of Cheongju city and the neighborhood including Yukgeori market by calculating the depths of nodes in the network using analysis models based on space syntax. The results illustrated that long street with the function to attract people and acts as a bridge of traffic and communication between highly modernized commercial area and traditional market can lead to continuous win-win development of both areas and the revitalization of traditional market through the promotion of social activities in the market. We expect that sound and sustainable development of contemporary cities, which lost tradition, will be achieved through the results of this study.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1195-1200
• /
• 2020

The DOM (: Digital Optical Method), which measures the turbidity of chimney smoke, is a method of calculating the turbidity by setting the area to be measured and the contrast area using a low-cost digital camera that can be easily obtained. However, it is difficult to measure clouds and white smoke in a cloudy sky. In this paper, we develop a background sky type model that can represent the background sky and classify the type by periodically photographing it with a digital camera to solve this problem. In addition, based on the model, we develop a filter to optimize white smoke image and prove its excellence through experiments.

• Tribology and Lubricants
• /
• v.38 no.3
• /
• pp.115-119
• /
• 2022

This paper selected three kinds of grease with the same type but different consistency for the experiment. The purpose of the experiment is tested the effect of different consistency of grease on the wear of the gear surface. Different torque test groups were selected in the test, and the lubrication effect of different greases was tested in the test groups with the same torque. After each set of tests, the wear of the gear surfaces was observed and recorded. The data recorded in the experiment included the area of the wear area on the gear surface, the type of wear and the volume of wear. After the test, the gear surface roughness was measured. By calculating the wear volume, the effects of different concentrations of grease on the gear surface wear were compared. The experimental results show that under different stress conditions, the consistency of the grease has a great influence on the lubricating effect of the gear surface and the gear wear. Under the condition with low speed and high torque, different grease consistency affect the gear surface wear, the high consistency grease can reduce the wear of the gear surface, so that the gear can get better lubrication effect during the work.

• Journal of Forest and Environmental Science
• /
• v.26 no.3
• /
• pp.161-170
• /
• 2010

A study was conducted for indentifying the floral biodiversity of woody species by calculating four diversity indices using data collected from 4 stands of different age groups and disturbance regimes in two areas of Madhupur tract. Results showed that highest species diversity in the old growth secondary coppice forest (>60 years) under moderate anthropogenic disturbances of Madhupur National Park area (delete (D=0.74, H'=3.36) followed by old growth secondary forest stands (>40 years) under moderate disturbances at Bhawal National Park area (D=0.65, H'=2.81). Plant species diversity of the young enrichment plantations (<20 years and <15 years) under high anthropogenic disturbances in both the areas are much low (D=0.54 and H'=2.16 and D=0.52 and H'=1.92 respectively), which indicate high anthropogenic disturbances coupled with introduction of invasive exotics that are rival for endemic species are detrimental for conservation of biological diversity of tropical moist deciduous forests of Madhupur tract in Bangladesh.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.227-228
• /
• 2022

In order to achieve the goal of cost management, which is one of the three major management goals of building production, this paper introduces an approximate cost estimating automation technology in the design stage as the importance of predicting construction costs increases. BIM is used for accurate estimating, and the quantity of structural members and finishing materials is calculated by creating a 3D model of the actual building. However, only 2D basic design drawings are provided when making an estimating. Therefore, for accurate quantity calculation, digitization of 2D drawings is required. Therefore, this research calculates the quantity of concrete structural members by calculating the area for the recognition area through 2D drawing recognition technology incorporating computer vision. It is judged that the development technology of this research can be used as an important decision-making tool when predicting the construction cost in the design stage. In addition, it is expected that 3D modeling automation and 3D structural analysis will be possible through the digitization of 2D drawings.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.61-66
• /
• 2004

In this paper an effort is made to develop an innovative spatial arrangement concept pertaining to ship building industry. The spatial scheduling is the problem that concentrates on effective planning of available space and arrangements of blocks and in a priority manner. In order to create an effective spatial scheduling. a database providing the priority has to be available to make the erection sequence. Such a system works hand in hand with erection sequence generator program The erection sequence program works on the conventional network analysis method which uses a typical parent-children idea for the calculation of the ENT(possible earliest network start time) and LNT(possible latest network start time). This program works in a cyclic manner taking turns by calculating the ENT in upward trace and LNT on the return trace thereby generating the entire erection sequence diagram for the requisite problem The generated database serves as an input data for spatial scheduling problem. When the system works it takes into consideration the entire system based on heuristic concepts as mentioned. There system uses the spatial aspects such as the available area of the P. E area and plan area of the corresponding blocks and its priority of erection from the erection sequence generator program develops the spatial scheduling arrangement. In this paper using all these concepts an innovative spatial schedule development system developed.