• 지적과 국토정보
• /
• 제50권2호
• /
• pp.53-68
• /
• 2020

지적재조사사업은 지적공부의 등록사항을 조사·측량하여 기존의 지적공부를 디지털에 의한 새로운 지적공부로 대체함과 동시에 지적공부의 등록사항이 토지의 실제 현황과 일치하지 아니하는 경우 이를 바로 잡기 위하여 실시하는 국가사업이며 사업기간은 일반적으로 1년 6개월 내지 2년 정도 소요되지만 토지소유자간의 이해관계가 얽혀 복잡한 구조 및 내적 갈등으로 지적재조사 측량을 마치고 조정금 과정에서 발생되는 문제점으로 소요기간이 길어지고 있는 실정이다. 현실경계로 경계를 설정한 이후 토지소유자별로 필지의 면적을 확정하고 지적소관청은 확정된 면적과 지적공부상 면적의 증감에 따라 조정금 산정으로 정산하여 지적재조사사업을 완료하도록 하고 있다. 따라서 조정금과 관련하여 조정금 산정의 시기 및 조정금 산정방법에 대하여 적용한 실증연구를 통하여 합리적인 조정금이 적용될 수 있도록 해결방안을 제시하였다. 개선방법을 통하여 토지소유자와 합의를 최단기간으로 이끌 수 있는 기대효과가 나타났으며 지적재조사사업의 본 취지에 부합하는 현실경계로 설정이 가능하다는 효과도 나타났다. 지적재조사사업과 병행연구를 통하여 표준지 조정금 산정 방법과 조정금 부과방식과 조정금이 부과 되지 않는 경계조정방식의 개선방안을 제시한 본 연구로 지적재조사사업이 2030년까지 완료될 수 있기를 기대한다.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.68-75
• /
• 2014

It is very important to classify explosion hazardous area (EHA) suitably and to use proper explosion-proof electric installations for facilities using flammable gases and liquids. In the past, various examples in the Notification of Ministry of Employment and Labor were referred to in classifying EHA. But, at present, many companies use the hypothetical volume in Korean Standards (KS). This study reviews the validity of EHA classification based on the hypothetical volume by comparing the calculated radii of EHA with those obtained by a consequence analysis program called PHAST and a mathematical approach in British Standards (BS). The radii of EHA by the hypothetical volume were found to be slightly larger than those by the other two methods. This was attributed to rather conservative uses of a safety factor(k) and a correction factor(f) for availability of ventilation in calculating the hypothetical volume. Since the differences are not so conspicuous, however, it is concluded that the hypothetical volume in KS is a valid means for the classification of EHA. This study also presents a table of the radii of EHA for easy reference by small-scale companies using city gas, C3-LPG and flammable liquid(toluene), respectively. The table consists of 25 leakage scenarios corresponding to combinations of 5 pipe(nozzle) sizes and 5 operating conditions for each flammable gas and liquid.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.289-290
• /
• 1998

Purpose To investigate the difference of total activation in visual area, motor area, and cerebellum according to the stimulation paradigm. Materials and Methods Functional MR imaging was performed in 5 healthy volunteers with visual and motor activity using EPI technique. LED and Checker-Board stimulation were performed for visual activity. Thumb motion and Finger tapping were performed for motor and cerebellum activity. Time course data was obtained by calculating the total activation which was defined as the number of activated pixels x averaged pixel intensity. Results In the case of visual activity with LED stimulation, we found increased total activity of more than 100% compared with Checker-Board stimulation. In the case of motor area and cerebellum with Finger tapping stimulation, we found increased total activity of more than 100% and 150%, respectively compared with Thumb motion stimulation.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.200-207
• /
• 2005

This study compares two different methods of measuring brain-BOLD activation. By comparing two different methods of measurement i.e., one method calculating the neural activation area (the number of activated voxels), while the other measured the neural activation intensity (the mean intensity of selected activated yokels), this study identified the more precise method of measuring brain activation which results from the completion of a visuospatial task. 16 right-handed male college students (mean age 23.2 years) participated in this study as subjects. Functional brain images were scanned on them using a 3T MRI single-shot EPI method. No correlation was found between the levels of cognitive performance and number of activated yokels in the activated brain areas. However, a significant correlation was found between the levels of cognitive performance and the mean intensity of selected activated yokels in the parietal, frontal, and other areas. In conclusion, the method of mean intensity was considered a better index of brain activity rather than the activated yokels measurement method.

• Mycobiology
• /
• 제45권3호
• /
• pp.172-177
• /
• 2017

The genus Paxillus is characterized by the difficulty of species identification, which results in reproducibility problems, as well as the need for large quantities of fungal inoculum. In particular, studies of Paxillus ammoniavirescens have reported divergent results in the in vitro growth while little is known of its capacity to degrade organic matter. For all the above, and assuming that this variability could be due to an inappropriate culture media, the aim of this study was to analyse growth in different culture media (MMN, MS, and 1/2 MS) and in the case of MMN in presence/absence of two types of organic matter (fresh litter and senescence litter) to probe the saprophytic ability of P. ammoniavirescens. We also evaluated the effects of pH changes in the culture media. Growth kinetics was assessed by weekly quantification of the area of growth in solid culture media over 5 wk, calculating the growth curves and inflection points of each culture media. In addition, final biomass after 5 wk in the different culture media was calculated. Results showed that best culture media are MS and 1/2 MS. Moreover, an improvement in growth in culture media containing decomposing fall litter was observed, leading to confirm differences in the culture media of this species with others of the same genus. Further, we established that all growth media suffered a significant acidification after fungal growth.

• 설비공학논문집
• /
• 제13권5호
• /
• pp.356-367
• /
• 2001

A numerical analysis on branch type sparger in drain tank for depressurization is performed to investigate the flow characteristics due to the change of design factor. As the result of this study, sparger\\`s flow resistance coefficient(K) is 3.53 at the present design condition when engineering margin for surface roughness is considered as 20%, and flow ratio into branch pipe ($Q_s/Q_i$) is 0.41. The correlation for calculating flow resistance coefficients as design factor is presented. Flow resistance coefficient is increased as section area ratio of branch pipe for main pipe and outlet nozzle diameter of main pipe decreasing, but the effects of branch angle and inlet flow rate of main pipe are small. As the change rate of ($Q_s/Q_i$)becomes larger, the change rate of flow resistance coefficient increases. The rate of pressure loss has the largest change as section area ratio changing. The condition of maximum flow resistance in sparger is when the outlet nozzle diameter ratio of main pipe ($D_e/D_i$) is 0.167, the section area ratio ($A_s/A_i$) is 0.1 and the branch angle ($\alpha$) is 55^{\circ}$.

• 한국항해항만학회지
• /
• 제35권2호
• /
• pp.159-165
• /
• 2011

The aim of paper is to calculate the optimized size of Mobile Harbor(MH) which would be operated in South Korea coast area. MH is the combined entity which has the function of both ship and container port. In estimating the optimized size, the total cost concept is applied to the different size of MH. Trade-off factors for calculating total cost are MH cost and the over-capacity lost cost. The factors for MH cost estimation are the cargo demand, distance from origin to destination, voyage route and MH's fixed and variable cost in both sailing and port. The other cost is the over-capacity lost cost which is occurred from dead space in case of oversize compared with a voyage demand. The alternatives for the least cost are 250TEU, 500TEU, 750TEU and 1,000TEU sized vessel. The result of research is that 250TEU sized vessel is optimized in a South Korea costal service. If the coastal area be separated in terms of voyage distance or the specific area in considering trade, the optimized size is changed depending upon distance.

• The Journal of Korean Physical Therapy
• /
• 제23권1호
• /
• pp.45-51
• /
• 2011

Purpose: This study investigated the effect of needle electrode stimulation at various frequencies on change in wound healing in excision wound rats Methods: Twenty-four Sprague-Dawley adult male rats were assigned to one of four groups: control (n=6), acupuncture group (n=6), low rate (2 Hz) percutaneous electrical stimulation group, high rate (100 Hz) percutaneous electrical stimulation group (n=6). We analyzed morphological effects by measuring the area of the excision wound, the contraction rate, and chromatic red. A digital camera and an image analysis program were used to measure and analyze the wound area,which was also used for the contraction rate. Chromatic red was obtained by calculating red, green, and blue (RGB) values of the wound area. Results: The electro acupuncture stimulation groupsshowed significant healing effects compared to the control and acupuncture groups. Conclusion: The results of this study showed that various frequencies of percutaneous electrical stimulation have a therapeutic effect on wound healing.

• 한국지열·수열에너지학회논문집
• /
• 제14권4호
• /
• pp.1-6
• /
• 2018

In this study, the energy consumption of the typical floor was compared by the total energy comsumption of the building in highrise building. In gerneral, many researchers are studying on the typical floor in highrise buildings for avoiding complexity in energy simulation. But few papers are studied on energy consumption along the floors. In the model bulding, the energy consumption data were acquired by BEMS system in 2011. According the data, the total net energy consumption was $193.99kWh/m^2$ for all area and the total net energy consumption was $247.61kWh/m^2$ for HVACR area. The total electricity and gas energy are used 47.7% for heating and cooling, 33.5% for lighting and plug, 12.9% for conveyance power and 5.9% for restaurant. In comparison of only ground floor, amount of energy consumption in the lobby is 10%, and 90% of total energy consumption is used in the typical floor. For this result, energy simulation on the typical floor is acceptable for calculating the total energy consumption in the highrise building.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제30권1호
• /
• pp.7-17
• /
• 2024

Purpose: This study is to present basic data and standards for calculating the space composition and area required when planning a neonatal intensive care unit. Methods: Review domestic and foreign facility standards and regulations related to the current neonatal intensive care unit, select a regional neonatal intensive care center designated by the Ministry of Health and Welfare as a case hospital, and organize a space program for the construction plan of the neonatal intensive care unit through analysis of characteristics such as facility size and function composition. Results and Implications: The size, facility area, and detailed room composition characteristics of the neonatal intensive care unit in Korea were confirmed, and essential rooms and appropriate areas were derived when planning the construction of the neonatal intensive care unit. Korea's legal facility standards related to neonatal intensive care units are lower than the actual hospital status and overseas standards, and the facility standards of the medical law need to be improved.