• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.595-616
• /
• 2011

Impact experiments have been carried out on concrete slabs. The first group was traditionally manufactured, densely reinforced concrete targets, and the next were ordinary Portland and calcium aluminate cement based HPSFRC (High performance steel fiber reinforced concrete) and SIFCON (Slurry infiltrated concrete) targets. All specimens were hit by anti-armor tungsten projectiles at a muzzle velocity of over 4 Mach causing destructive perforation. In Part I of this article, production and experimental procedures are described. The first group of specimens were ordinary CEM I 42.5 R cement based targets including only dense reinforcement. In the second and third groups, specimens were produced using CEM I 42.5 R cement and Calcium Aluminate Cement (CAC40) with ordinary reinforcement and steel fibers 2 percent in volume. In the fourth group, SIFCON specimens including 12 percent of steel fibers without reinforcement were tested. A high-speed camera was used to capture impact and residual velocities of the projectile. Sample tests were performed to obtain mechanical properties of the materials. In the companion Part II of this study, numerical investigations and simulations performed will be presented. Few studies exist that examine high-velocity impact effects on CAC40 based HPSFRC targets, so this investigation gives an insight for comparison of their behavior with Portland cement based and SIFCON specimens.

• 시멘트
• /
• 통권120호
• /
• pp.24-33
• /
• 1990

• 에너지공학
• /
• 제27권1호
• /
• pp.33-39
• /
• 2018

In this paper, we reviewed briefly about the barrier materials for the radioactive waste disposal. The primary concept of the radioactive waste disposal is safety. The goal of the radioactive waste management is to assure that the environment is not adversely affected and also public. There are a wide variety of materials are available for the radioactive waste disposal or storage. Among those coal fly ash is one of the significant materials are used as a barrier material. Here we reported, the Calcium sulfo aluminate (CSA) from coal fly ash is effectively suitable for the radioactive waste disposal. This is one of the ways of utilization of waste and manufactured the valuable materials for future indeeds.

• 한국안전학회지
• /
• 제27권4호
• /
• pp.68-75
• /
• 2012

The biogenic corrosion of mortars adopted in sewage repair by sulfuric acid-producing bacteria was considered in this paper. Calcium aluminate cement (CAC) was known to resist microbiologically-induced corrosion significantly better than portland and blended portland cement.In this study, CAC as well portland cement mortars were tested as main binder to evaluate the corrosion resistance by the chemical immersion test. Replacement ratios of CAC were changed as 0, 20, 40, 50, 60% of OPC binder and 0, 2, 4, 6% of EVA(Ethylene Vinyl Acetate) were also adopted to increase properties of CAC repair mortars in sewage application. Setting time, compressive strength, acid resistance and adhesive strength were measured for various experiments. As a results of the experiments, the proper formulation of repair mortars was found at 40% of CAC and 4% of EVA. Finally, the CAC mortars adopted in field sewer pipe and were demonstrated to superior in adhesion and workability.

• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.617-636
• /
• 2011

We present the numerical implementation, simulation, and validation of the high-velocity impact experiments that have been described in the companion article. In this part, numerical investigations and simulations performed to mimic the tests are presented. The experiments were analyzed by the explicit integration-based software ABAQUS for improved simulations. Targets were modeled with a damaged plasticity model for concrete. Computational results of residual velocity and crater dimensions yielded acceptable results.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권4호
• /
• pp.1-9
• /
• 2020

본 연구는 철근콘크리트 구조물의 염해 내구성 향상의 일환으로써, 보통 포틀랜드 시멘트에 실험체별 다른 비율의 칼슘 알루미네이트 시멘트와 합성 CA₂를 혼입하여 혼입 비율에 따른 염소이온 고정능력을 평가하였다. 침지 후 실험체의 물리·화학적 특성을 압축강도, 공극 구조, 수화물 분석으로 염소이온침투깊이를 EPMA를 통하여 고찰하였다. 클링커 조성에 CA가 34%미만일 경우 실험체의 조밀성이나 강도 발현 양상이 구조재료로서 사용 제한이 없을 것이라고 판단되었으며 CAC와 CA₂를 5:5비율로 혼입하여 실험체에 치환한 실험체가 CAC 혹은 CA₂만 치환한 실험체보다 염소이온 침투억제능력 과 AFm상 및 프리델 염 생성이 높은 것으로 확인할 수 있었다. 결과적으로, 시멘트 페이스트 대비 칼슘 알루미네이트 클링커 치환율이 증가함에 따라 일반적으로 염소이온 고정능력이 향상하였고, CA-CA₂비율에 따라 염소이온 고정 능력 및 염소이온 침투억제 능력에 차이가 있음을 확인할 수 있었다. 실험 범위 내에서 CA-CA₂비율이 39:60이며 시멘트 페이스트 대비 10% 치환한 실험체인 M 10 가 가장 우수한 것으로 나타났다.

• Journal of Periodontal and Implant Science
• /
• 제32권4호
• /
• pp.769-779
• /
• 2002

This present study was carried out to find the effects of calcium aluminate cement($CaO\;{\cdot}\;Al_2O_3$, CAC), which has been developed with bio-compatibility and mechanical properties, in biological environments. Two different particle sizes of CAC - 3.5${\mu}m$ vs. 212${\sim}$250${\mu}m$ which is recommended in periodontal bone grafting procedures-were filled in 8mm calvarial defect in Sprague-Dawley rat. The specimens were examined histologically, especially the bone-cement interface and the response of surrounding tissues. The results are as follows; 1. In the control group, inflammatory cells were observed at 2 weeks. At 8 weeks, periosteum and dura mater were continuously joined together in the defect areas. But in the center of defect area were filled up with the loose connective tissues. 2. In the experimental group l($212{\mu}m{\sim}250{\mu}m$ particle), immature bone was formed and outermost layer was surrounded by osteoid layer at 2 weeks. Osteoblasts were arranged between immature bone and osteoid layer. And, osteoid layer was remained until 8 weeks after surgery. 3. In the experimental group 2, periosteum and dura mater lost its continuity at 2 weeks. Scattering of CAC particles and infiltration of inflammatory cells were observed, which this findings deepened at 8 weeks. The result of this study shows that when calvarial defects in white rats are filled with calcium aluminate cement of 212${\sim}$250${\mu}m$, the materials are to be bio-compatible in growth and healing on surrounding tissues. When further researches are fulfilled, such as direct bone adhesion and bone regeneration ability, it's possible that CAC could be applied to various periodontology fields in the future.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.86-93
• /
• 2020

숏크리트용 콘크리트는 일반적으로 1종 보통 포틀랜드시멘트(이하 OPC)를 100% 사용한 레미콘 제품에 현장에서 별도로 숏크리트용 급결제를 약 5% 혼합하는 방식으로 사용된다. 본 연구에서는 국내에서 사용률이 높은 시멘트 광물계 급결제(calcium aluminate)를 사용한 숏크리트용 결합재로서 기존 OPC에 슬래그분말(이하 SP), 석회석분말(이하 LSP)를 첨가하여 혼합시멘트를 사용할 때의 응결 및 압축강도, 페이스트 수화물 및 공극구조에 미치는 영향을 시험 및 분석하여 재령별 수화물의 생성량과 공극구조가 숏크리트의 모르타르 성능에 미치는 영향을 파악하였다. 향후 숏크리트용 결합재로서 최적화된 결합재를 제조하는데 활용할 수 있을 것으로 기대된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권4호
• /
• pp.122-129
• /
• 2012

이 연구에서는 시멘트계 광물로 제조된 그라우트의 사용에 의해 발생되는 환경문제인 pH의 증가와 중금속오염을 MC계와 킬레이트고분자를 이용하여 평가하고자 하였다. 그라우트 재료로 보통포틀랜드시멘트와 슬래그시멘트를 사용하였고 급결재로 칼슘알루미네이트계 급결성재료의 혼합물을 사용하였으며, 중금속과 pH의 발생을 방지하기 위해 증점제를 사용하였다. 측정결과, 킬레이트고분자를 사용할 경우에 그라우트에 의한 pH의 증가가 최소화되었으며 중금속($Cr^{6+}$)은 용출되지 않았다. 그 이외의 경우에는 pH의 증가와 중금속 용출이 뚜렷이 증가하였다. 또한, 재령에 따른 중금속 발생량은 용출시험 1일에서 전 용출량의 약 97% 이상이 용출되었고 이후는 추가 발생되지 않는 것으로 나타났다. 이 연구의 결과로부터 pH의 증가와 $Cr^{6+}$과 같은 중금속의 용출을 제어하기 위해서 BSC와 킬레이트고분자를 사용하는 것이 아주 유용함을 알 수 있었다.

• 시멘트 심포지엄
• /
• 통권40호
• /
• pp.55-63
• /
• 2013