• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.282-286
• /
• 2003

We investigated the effects of calcination temperature and sintering additives on the sintering behaviors and microwave dielectric properties of $(Zn_{0.8}Mg_{0.2})TiO_3$. Highly densified samples were obtained at the sintering temperatures below $1000^{\circ}C$ with additions of 0.45 wt.% $Bi_2O_3$ and 0.55 wt.% $V_2O_5$. From the examination of the existing phases and microstructures before and after sintering of $(Zn_{0.8}Mg_{0.2})TiO_3$ system calcined at the various temperatures ranging from $800^{\circ}C$ to $1000^{\circ}C$, it was found that high $Q{\times}f_o$ values were obtained when unreacted or second phases in calcined body were reduced. When calcined at $1000^{\circ}C$ and sintered at $900^{\circ}C$, it consists of hexagonal as a main phase with uniform microstructure and exhibits $Q{\times}f_o$ value of 42,000 GHz and dielectric constant of 22.

• 약학회지
• /
• 제40권6호
• /
• pp.659-665
• /
• 1996

Zinc white is mainly used as a mild astringent, protectant. and has weak antiseptic action. It is well known that the yield of zinc white produced is greatly affected by the syn thetic conditions such as the reactant concentration, reaction temperature, washing water temperature, mole ratio of reactants, and drying temperature, calcination temperature, etc. The purpose of this study is to investigate the optimal synthesis conditions of zinc white produced. A randomized complete block design suggested by G.E.P. Box and K.B. Wilson was applied for this purpose. Basic zinc carbonate was prepared by reacting zinc sulfate and sod. carbonate solution in this study. Zinc white comes when prepared by calcination of basic zinc carbonate. The optimum synthesis conditions of zinc white obtained from this study is as follows: 1) The reacting temperature range is: 92-100$^{\circ}C$, 2) The concentration of reactant solution is 23.6-27%, 3) The optimum mole-ratio: [ZnSO4]/[Na2CO3] is 1.74~1.96, 4) The washing water temperature is 36$^{\circ}C$, 5) The drying temperature range is 68-74$^{\circ}C$, 6) The calcination temperature is 600$^{\circ}C$. The outcome of DSC indicated a desolvation of basic zinc carbonate occurred at about 133.3$^{\circ}C$. The dehydration of the compound ceased at about 267.9$^{\circ}C$ and the decarboxylation ceased at about 379.9$^{\circ}C$. The physical and chemical properties of zinc white as medicine were studied by use of Volume Test.

• 공업화학
• /
• 제21권4호
• /
• pp.440-444
• /
• 2010

$SnCl_4$와 침전제로 ammonium nitrate ($NH_4NO_3$)의 수용액들을 사용하여 $90^{\circ}C$에서 침전반응으로 얻은 주석산(stannic acid)을 열처리하여 $SnO_2$ 분말을 제조하였으며, 요소($(NH_2)_2CO$)를 침전제로 사용한 균일침전법으로 주석산을 제조하여 열처리 전후로 재료의 특성을 상호 비교하였다. Ammonium nitrate의 침전법에 의한 주석산은 열처리에 따른 중량감소가 $700^{\circ}C$까지 이루어졌으며, 전체 중량감소는 16.5%였다. 또한 $600^{\circ}C$의 열처리로 비정질 주석산이 완전한 결정질의 $SnO_2$로 상변화가 이루어졌다. 주석산 제조 과정에서 $SnCl_4$ 수용액의 농도 증가 및 열처리 온도 증가에 따라 $SnO_2$의 결정입계가 증가하였다. 요소를 침전제로 사용한 균일침전법은 ammonium nitrate를 침전제로 하는 균일법보다 같은 조건의 열처리 공정 후에 상대적으로 미세한 결정입계의 $SnO_2$를 얻을 수 있었다.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3971-3976
• /
• 2009

본 연구에서는 버려지는 굴패각을 상수도관 내부의 부식방지를 위한 세라믹 코팅제의 원료물질로 활용하고자 굴패각의 물리화학적 특성 및 소성가공 특성에 관한 연구를 수행하였다. 굴패각은 92.08%가 탄산칼슘($CaCO_3$)으로 이루어져 있었으며, 분쇄된 굴패각 입자의 형태는 대부분 타원형 형태를 나타내었다. 그리고 소성 처리된 굴패각의 특성은 소성온도가 높고 소성시간이 경과할수록 무게감소량 및 칼슘함량이 증가하는 경향을 나타내어 소성온도를 높이고 입자크기를 작고 균일하게 할수록 소성가공이 효율적인 것으로 나타났다. 이에 소성가공 처리된 굴패각은 정수장 및 상하수도관의 내부 부식방지를 위한 세라믹 코팅제의 원료물질로써 재활용이 가능할 것으로 판단하였다.

• 자원리싸이클링
• /
• 제18권6호
• /
• pp.24-29
• /
• 2009

나노크기의 산화세륨 분말을 제조하기 위해서는 출발물질로 탄산세륨[$Ce_2(CO_3)3{\cdot}XH_2O$]이 널리 사용되고 있는데, 탄산세륨은 소성을 통하여 탄산기체와 수증기를 방출하면서 더욱 작은 입자들로 쪼개진 다공성 구조의 산화세륨이 형성되며 이러한 다공성의 산화세륨을 분쇄함으로서 나노크기의 산화세륨을 얻을 수 있다. 본 연구에서는 염화세륨용액으로부터 중탄산암모늄을 첨가하여 제조된 탄산세륨의 소성온도, 분쇄시간, 유성밀의 회전속도, 분산제 첨가량 및 장입된 분쇄 볼 크기 등의 변화에 따라 얻어지는 산화세륨의 평균 입자크기 분석을 통하여 탄산세륨으로부터 나노크기의 산화세륨 제조공정 특성에 대하여 알아보았으며, 소성온도 $700^{\circ}C$, 분쇄시간 5시간 조건에서 평균 입자크기 160 nm의 산화세륨 분말을 제조할 수 있었다.

• 한국응용과학기술학회지
• /
• 제17권2호
• /
• pp.113-119
• /
• 2000

Alkylation of phenol with tert-butanol in the liquid phase on mordenite was studied. The influence of many reaction parameters such as calcination temperature, reaction temperature, t-butanol/phenol molar ratio on catalytic properties was discussed. The main products were 2,4-di-t-butylphenol, o-t-butylphenol, p-t-butylphenol, the last of these was wanted product. In order to enhance the selectivity of p-t-butylphenol, optimum conditions were recommended at $500^{\circ}C$ calcination temperature, $140^{\circ}C$ reaction temperature, 1.0 molar ratio of reactants over mordenite. P-t-butylphenol was formed with 90% isomer selectivity at optimum conditions after 4hr reaction. On the basis of the behavior obtained in the cases mentioned, optimum conditions and catalytic properties for t-butylation of phenol were provided.

• 열처리공학회지
• /
• 제7권1호
• /
• pp.11-16
• /
• 1994

Anatase $TiO_2$ particles prepared by experiment were used to study the change of crystal structure by calcination temperature. The results were as follows. Crystallite size of anatase $TiO_2$ particles increased with calcination temperature. The rate of increasing the crystallite size of anatase $TiO_2$ particles was decreased below $700^{\circ}C$ and was markedly increased above $700^{\circ}C$. Unit cell volume of $TiO_2$ was expanded at low temperature and was contracted at high temperature. This result means that the growth of crystallite size was occured in the direction.

• Journal of Electrochemical Science and Technology
• /
• 제15권1호
• /
• pp.161-167
• /
• 2024

Despite the important role of manganese (Mn) in cobalt-free, Ni-rich cathode materials, existing reports on the effects of Mn as a substitute for cobalt are not consistent. In this work, we analyzed the performance of cathodes comprised of Li(Ni_1-xMn_x)O₂ (LNMO). Both beneficial and detrimental results occurred as a result of the Mn substitution. We found that a complex interplay of effects (Li/Ni mixing driven by magnetic frustration, grain growth suppression, and retarded lithium insertion/extraction kinetics) influenced the performance and was intimately related to calcination temperature. This indicates the importance of establishing an optimal reaction temperature for the development of high-performance LNMO.

• 한국세라믹학회지
• /
• 제49권5호
• /
• pp.432-437
• /
• 2012

Electrical properties of the laminated SMD-type PTC thermistor for microcircuit protection were investigated as a function of calcination and sintering temperature. $BaTiO_3$ with $Y_2O_3$ and $MnO_2$ were calcined at 1000 to $1150^{\circ}C$ for 2h and the laminated SMD-type PTC thermistor was sintered at 1350 to $1400^{\circ}C$ for 2h in a reduced atmosphere (1% $H_2/N_2$). Sintered density of the sample was dependent on the calcination and sintering temperature. Electrical properties of the sintered samples were strongly dependent on the densities of samples. For the samples with density below 4.6 g/$cm^3$, the insulator characteristics were observed, while PTC jump characteristics (R150/R30) were disappeared for the sample with density above 5.05 g/$m^3$. Optimal PTC characteristics were obtained for the sintered samples with density of 5.05 g/$m^3$. The laminated SMD-type PTC thermistor prepared by calcination at $1100^{\circ}C$ for 2h and sintering at $1270^{\circ}C$ for 2h showed the room temperature resistivity of $11{\Omega}{\cdot}cm$ and PTC jump characteristics of $10^2$ order.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.35-39
• /
• 2019

In this study, we investigated the optimum calcination temperature of lead-free $0.74(Bi_{0.5}Na_{0.5})TiO_3-0.26SrTiO_3$(BNST) piezoelectric ceramics by analyzing the crystal structure, dielectric properties, and electric field-induced strain behavior. BNST ceramics prepared by conventional solid-state reaction methods at various calcination temperatures according to the industrial standard. All samples of BNST ceramics were subsequently sintered at $1,175^{\circ}C$ for 2 h. Crystal structure classification of the ceramics showed a single perovskite phase, with no second phase detectable for the samples calcined at $750^{\circ}C$ or higher. BNST samples calcined at $850^{\circ}C$ exhibited the most optimal values for itsand the common physical parameters of $density=5.518g/cm^3$, ${\varepsilon}=1,871.837$, $tan{\delta}=0.047$, and ${d_{33}}^*=874pm/V$.