• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1051-1052
• /
• 2007

In this paper, as a clean lift, a maglev(magnetic levitation) clean lift is designed and described. The maglev clean lift, which is superior to conventional lifts in vibration, noise, clean class and speed characteristics, consists of magnets, guide rails, guide rollers, magnet module frame, cage, guidance controller, sensors, etc. As design specifications, the maximum value of vibration is 0.2G, the maximum value of noise is 60dB, and the clean class is #10. The design results for the maglev clean lift are shown and discussed.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.127-131
• /
• 2006

Existing orthopedic implants such as pedicle screw and spinal cage were designed to fix the spinal structure. But, nowadays, physicians want to rehabilitate there original functions. To achieve this request, we studied micro-movable structure for interspinous. As a first step, we designed interspinous structure by 3D CAD to join each spinous processes. Next, we simulate it with various factors such as the thickness of micro-movement structure and the design of clip. At last, we performed static compressive test to satisfy the failure load of 339N and dynamic endurance test of 1.2M cycle. As a result, we developed interspinous implant and did several surgery to evaluated its satisfaction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.631-632
• /
• 2006

This paper is written by research for the transient characteristics of the Single-phase Line-start permanent Magnet. The Single-phase Line-start permanent Magnet is most likely to substitute for Single-phase Induction Motor which is used about many appliance currently, because that has good points. For example, It has a Line-start of ability and a High-efficiency. And it need not power convergence device. The rotor of The Single-phase Line-start permanent Magnet has cage-bar with permanent magnet. This motor is started by cage-bar. When it entered synchronous condition, the rotor is rotated by the permanent magnet. But the design of the permanent magnet is very important, because the breaking torque of the permanent magnet interrupt to start a rotor. Finally, if Flux Barrier is not concerned, we do not get result of our object. Therefore this thesis is concerned about Flux Barrier.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권10호
• /
• pp.1495-1499
• /
• 2017

Objective: This study aimed to investigate the effects of enrichment resources (a perch, dustbath, and nest) layout in furnished laying-hen cages (FC) on exterior quality of eggs. Methods: One hundred and sixty-eight (168) Hy-Line Brown laying hens at 16 weeks of age were randomly distributed to four treatments: small furnished cages (SFC), medium furnished cages type I (MFC-I), medium furnished cages type II (MFC-II), and medium furnished cages type III (MFC-III). Each treatment had 4 replicates or cages with 6 hens for SFC (24 birds for each SFC) and 12 hen/cage for MFC-I, -II, and -III (48 birds for each MFC-I, -II and -III). Following a 2-week acclimation, data collection started at 18 weeks of age and continued till 52 weeks of age. Dirtiness of egg surface or cracked shell as indicators of the exterior egg quality were recorded each week. Results: The results showed that the proportion of cracked or dirty eggs was significantly affected by the FC type (p<0.01) in that the highest proportion of cracked or dirty eggs was found in MFC-I and the lowest proportion of dirty eggs in SFC. The results of this showed that furnished cage types affected both dirty eggs and cracked eggs (p<0.01). The results also indicated that not nest but dustbath lead to more dirty eggs. Only MFC-I had higher dirty eggs at nest than other FC (p<0.01). The results of dirty eggs in MFC-I and MFC-II compared with SFC and MFC-III seemed suggest that a low position of dustbath led to more dirty eggs. Conclusion: SFC design affected exterior egg quality and the low position of dustbath in FC resulted in higher proportion of dirty eggs.

• 한국가금학회지
• /
• 제40권2호
• /
• pp.97-103
• /
• 2013

본 연구는 산란계의 동물복지를 적용한 운동장 면적에서 사육한 산란계의 생산성, 면역성 및 스트레스 반응에 미치는 영향을 조사하여 동물복지농가 육성과 안전축산물 생산을 위한 기초자료로 활용하고자 수행하였다. 사양시험은 13주령의 Hy-line-Brown 계열의 실용 산란계 90수를 공시하여 38주간 실시하였다. 대조구는 수당 $0.042m^2$ 면적의 케이지에서 사육(케이지 사육), 수당 축사 $0.11m^2$(평사)와 운동장 $1.1m^2$를 결합한 환경에서 사육($1.1m^2$ 운동장), 수당 축사 $0.11m^2$(평사)와 운동장 $2.2m^2$를 결합한 환경에서 사육($2.2m^2$ 운동장)으로 시험구를 편성하여 처리구당 3반복, 반복당 10수씩 난괴법으로 배치하여 시험하였다. 초기 산란율은 유의적으로 케이지 사육에서 유의적으로 높았으나(P<0.05), 중 후반기에는 운동장 사육 시험구에서 다소 높은 산란율을 보였다. 사료섭취량은 39주령까지 운동장 시험구에서 유의적으로 많았으나(P<0.05), 이후에서 종료 시 까지는 차이가 없었다. 시산일령은 대조구 비해 운동장 사육 시험구에서 16일 지연되었으며(P<0.05), 사육 환경이 계란의 품질에는 영향을 미치지 않았다. 면역 활성을 조사한 결과, 운동장사육 시험구에서 IgA는 유의적으로 높았고(P<0.05), IgG, IgM 및 corticosterone은 비교적 높았다. 결론적으로 산란계운동장 사육은 산란 초기의 생산성을 저하시키나, 중 후기의 생산성은 약간 증가를 보였으며, 면역성은 증가하였으나 스트레스는 다소간 더 받는 것으로 나타났다. 따라서 초기 산란율을 향상시키고, 적절한 외부의 환경에 의한 스트레스를 줄일 수 있는 사육 환경이 뒷받침된다면 운동장 사육이 동물복지형 사육으로 매우 적합한 사양방법이라고 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.817-820
• /
• 2002

Since a squirrel cage induction motor by NEMA Design types is designed to withstand full-voltage starting, direct starting method can be the most economical one. Starting a squirrel cage motor from standstill by connecting it directly across the line may allow inush currents of approximately 500-600% of rated current at lagging power factor of 35-50%. For many of the large motors, the starting inrush current may be great enough to cause voltage dips, which may adversely affect the building's lighting system. Electric utilities also have restrictions on starting currents, so that voltage fluctuations can be held to prescribed limits. Therefore the need for choosing the most appropriate method of motor starting is quite essential. In this paper, we proposed a plan for the selection of the most appropriate motor starting method, first by way of numeric simulation using manufacturer's data and second by way of actual experience. So far, more often than not, the selection of motor starting method has been accomplished only as regards to the capacity of the motor and the frequency of starting and stopping. But nowadays such high-tech apparatus as soft starters are being developed, and we are on the position to give more attention to clarify the way of selection of the motor starting method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권5호
• /
• pp.743-749
• /
• 2010

자동 부침식 가두리 시설을 개발하기 위해 가두리 시설을 구형 부자로 단순화하여 이것의 자동 침하 및 상승 관련 제어 알고리즘 및 프로그램을 개발하였고 실내 수조 실험을 통해 그 유용성을 확인하였다. 또한 기존 연구 결과의 수치와도 비교 분석함으로써 기존 연구의 수치 모델 결과의 유용성을 재확인하게 되었다. 그리고 실물 실험에 대한 선행 연구로써 많은 변수들과 부력에 대한 비선형적인 메커니즘을 제어를 통해 극복하였으며, 이는 실물 실험에 있어 중요한 요소로 작용될 것이다.

• 한국유체기계학회 논문집
• /
• 제10권6호
• /
• pp.17-23
• /
• 2007

In the present work, flow analysis has been performed in the steam turbine bypass control valve (single-path type) for two different cases i.e., case with steam only and case with both steam and water. The numerical analysis is performed by solving three-dimensional Reynolds-averaged Navier-Stokes (RANS) equations. The shear stress transport (SST) model and $k-{\varepsilon}$ model are used to each different case as turbulence closure. Symmetry condition is applied at the mid plane of the valve while adiabatic condition is used at the outer wall of the cage. Grid independency test is performed to find the optimal number of grid points. The pressure and temperature distributions on the outer wall of the cage are analyzed. The mass flow rate at maximum plug opening condition is compared with the designed mass flow rate. The numerical analysis of multiphase mixing flow(liquid and vapor) is also performed to inspect liquid-vapor volume fraction of bypass valve. The result of volume fraction is useful to estimate both the safety and confidence of valve design.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.104-108
• /
• 2017

Induction motors have wide applicability in many fields, both in industrial sectors and households, for their advantages of a high efficiency and robust structure. The introduction of power-source-containing harmonics into the induction motor winding lowers its efficiency and increases its temperature, greatly affecting its operation characteristics. In this study, we performed an electromagnetic field analysis using the time-difference finite-element method with the purpose of analyzing the steady-state current characteristics of an induction motor. Additionally, we calculated the steady-state current with a method combining an electromagnetic field equation and a circuit equation. In the electromagnetic field analysis, the nonlinearity was taken into account using the Newton-Raphson method, and a backward time-difference method was employed for the time derivative term. Then, we compared the steady-state current of the induction motor obtained by calculation with the experimentally measured values, thus validating the proposed algorithm. Furthermore, we analyzed the impacts of the shape and material of the rotor conductor bar of the induction motor on the steady-state current of the main winding.

• Journal of Korea Trade
• /
• 제23권7호
• /
• pp.13-33
• /
• 2019

Purpose - This study empirically investigated whether national distances (Cultural, Administrative, Geographic and Economic distance) have different effects on industries in different ways. Design/methodology - The empirical model utilized industry level export trade data to examine the differentiated effects of each national distance. By using direct measurement and covering 75 countries, this paper analyzes the effect of distances in different industries. More specifically, this study classified the industries into a more-sensitive/less-sensitive scale. Findings - The empirical results showed the complicated impacts of national distances on trade. Trade in industries that are more sensitive to cultural and administrative distances was not decreased as greatly as trade in industries that are less sensitive to cultural and administrative distances. Also, industries that are more sensitive to geographic distance showed a stronger negative impact on trade than less sensitive industries. Lastly, economic distance decreased trade for industries that are more sensitive to economic distance, while economic distance did not significantly increase trade for industries that are less sensitive to economic distance. Originality/value - As the first study to empirically find out whether national distance has different effects on industries, this study updated the measurements of national distance.