• Journal of Environmental Science International
• /
• v.31 no.4
• /
• pp.369-372
• /
• 2022

This study was conducted to determine the injury type and frequency of bearded dragons during single and group breeding according to stocking density, for 16 weeks. A total of 14 bearded dragons compromising three groups were selected for this study. Six and four bearded dragons bred in a cage of 45 cm × 45 cm × 45 cm were designed as group A and B, respectively. Group C was made of four partitions (20 cm × 20 cm × 20 cm) of equal size in the kennel, and the dragons, four in number, were reared alone. Injury type criteria were given 1 score each in 6 stages. Most of the injury types in group A were primary tail cutting, which was 1 point, depending on the score, except for 4 scores. The injury type of group A varied, that is 1, 2, 3, and 5 scores, and the pattern lasted for 2 to 9 weeks. After 10 weeks, the dragons showed no response to injury type, except 4 scores at 11 weeks and 2 scores at 14 weeks with a frequency of one, respectively. The representative injury types of the group B were primary tail cutting, which was 1 point, and the scores of the injury type from 2 to 11 weeks were the highest; the frequency of occurrence at 1 and 2 scores was 5 times and 3 times, respectively, and the frequency of occurrence at 3 scores was twice. In addition, 5 scores were found to have the lowest frequency of occurrence. Solitary breeding showed no response to the type of injury for 16 weeks. Consequently, single breeding with an appropriate stocking density did not affect stress, and it could be expected a positive aspect for pet welfare.

• The Journal of Fisheries Business Administration
• /
• v.43 no.2
• /
• pp.79-94
• /
• 2012

The purpose of this study is to investigate the production efficiencies of the Korean aquaculture fishery with respect to species and methods using a Data Envelopment Analysis. The study extracted the 8 fishes in each of the sea cage culture, aquarium basin, and enclosed aquaculture for the analytical purposes. First, the study estimated the technical, pure technical, and scale efficiencies of the total of 24 aquaculture fishes based on the traditional DEA under the assumptions of both CRS and VRS. 2 fishes were identified as the efficient DMUs under the CCR-model, and 6 fishes under the BCC-model. Second, we tested to see if there was any difference in production efficiencies regarding those three different methods of aquaculture. we could not find any evidence of the differences in efficiency using a rank sum test based on the traditional DEA. However, we could do find that the pure technical efficiency in the sea cage culture was lower than others at 1% level of significance and the pure technical efficiency in enclosed aquaculture was also lower than others at 5% level of significance using Bilateral-DEA, which could explicitly consider the heterogeneity in the 3 production methods of aquaculture. Finally, the study obtained the 95% confidence intervals of the efficiency scores for the 24 fishes under our study using the smoothed bootstraping method in the process of the re-sampling in cooperation with both a kernel density estimation and a reflection method. At the same time, we could estimate the bias-corrected efficiency scores while the traditionally estimated efficiency scores suffered from the biases in the process of solving a linear programming with the deterministic nature of a production frontier. And hence, we could distinguish the differences in production efficiencies of the 8 fishes with respect to those 3 methods of aquaculture.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.509-515
• /
• 2009

When a squirrel cage induction motor is loaded, the magnetic noise can increase depending on the load current. It is due to the variation of air gap harmonic fluxes from the rotor current induced by loading. This unfavorable noise can be anticipated by analysing the radial force waves in the air gap, the mode shapes of them, and stator core natural frequencies at each mode. With the experimental tests with the different rotor slot numbers, the variation of magnetic noise depending on the load current is studied and the method to reduce the magnetic noise is suggested with the newly developed magnetic noise analysis program.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.58-64
• /
• 2016

In this paper, the design of rotor shape was performed for improvement of start-up characteristics and efficiency in single-phase LSPM. In order to improve the start-up characteristics, shape of rotor aluminium cage bar was changed. Through arrangement of permanent magnets and installation of flux barriers, it was performed torque ripple reduction and efficiency improvement. Cogging torque and back-EMF is calculated by the no-load analysis, start-up time is calculated by the start-up state analysis, efficiency and torque ripple is calculated by steady state analysis. The characteristics of the motor were calculated through FEM.

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.498-504
• /
• 2006

The etch rates of photoresist (PR) and the etch selectivity of $SiO_2$ to PR in a high density $CHF_3$ plasma were investigated at different ion-incident angles and bias voltages. A Faraday cage was employed for the accurate control of ion-incident angles. The ion energy was controlled by changing bias voltages. The etch rate of $SiO_2$ continuously decreased with ion-incident angles but the etch rate of PR remained constant up to the middle angle region and decreased afterwards. The etch rates of $SiO_2$ normalized to those at $0^{\circ}$ incident angle changed with the ion-incident angle following a cosine(${\theta}$) curve. On the other hand, the normalized etch rates of the PR changed showing a drastic over-cosine shape in the middle angle region. The etch selectivity of $SiO_2$ to PR decreased with an increase in the ion-incident angle because the etch yields of PR were enhanced by physical sputtering in the middle angle region compared to the case of $SiO_2$ etching. The etch selectivity of $SiO_2$ to PR decreased with an increase in the bias voltage at nearly all ion-incident angles.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.151-156
• /
• 2012

Studies of non-cage or alternative systems have been discussing in EU because the EU has banned use of conventional cages for laying hens since 2012. This survey was carried out the information related to laying hens' welfare in Korea. Laying hens' breeding systems divided into deep litter, free range and alternative system, and livestock housings divided into windowless housing and open-type housing. The ratios of trough and bell feeder types were 37.5% and 62.5%, respectively. The ratios of nipple, trough, and bucket in waterer types 75%, 12.5%, and 12.5%, respectively. What stocking density is the most appropriate for production and welfare has been aroused. All laying hen farms met the required standards of stocking density ranged from 3.4 birds/$m^2$ to 7.6 birds/$m^2$ in this survey. According to welfare standards for laying hens, perch length should not be less than 15 cm. However, most laying hen farms did not satisfied the standards. We believe that presentdata contribute to develop alternative systems and to improve animal welfare in Korea.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.1-6
• /
• 2012

We studied that the effect of stocking density on growth and survival rate of the scallop, Chlamys farreri (initial shell height 32.97 mm and total weight 5.63 g) from June 2002 to October 2003 in the west coast of Korea. C. farreri is usually the west coast of Korea and northern China in the natural habitat of the coastal species. Range of surface water temperature in the study area was $4.3^{\circ}C$ to $25.3^{\circ}C$, salinity 29.2 psu to 32.1 psu, dissolved oxygen 5.32 mg/L to 7.51 mg/L and pH was 7.84 to 8.12, respectively. The stocking densities were 20, 30, 40 and 50 individuals per a compartment of suspension cage in culture beginning. After 16 months from initiation, ranges of shell height and mean total weight were from 64.35 mm to 76.23 mm and from 41.53 g to 64.85 g. The survival rate was from 82% to 100%. The growth rate of the scallop was negatively correlated with the stocking density. The growth of the shell height and total weight were decreased with decreasing of water temperature. Most of mortality of scallop occurred during March to April and September to October. Survival rate in the stocking density was decreased by density increase and was highest in 20 individual a compartment.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.163-172
• /
• 2011

Oxidation models of a rotor bar and end ring segment in an induction motor are presented to simulate the behavior of an induction machine working with oxidized rotor parts which are modeled as rotor faults in progress. The leakage inductance and resistance of the rotor parts arc different from normal values because of the oxidation process. The impedance variations modify the current density and magnetic flux which pass through the oxidized parts. Consequently, it causes the rotor asymmetry which induces abnormal harmonics in the stator current spectra of the faulty machine. The leakage inductances of the oxidation models are derived by the Ampere's law. Using the proposed oxidation models, the rotor bar and end ring faults in progress can be modeled and simulated with the motor current signature analysis (MCSA). In addition, the oxidation process of the rotor bar and end ring segment can motivate the rotor asymmetry, which is induced by electromagnetic imbalances, and it is one of the major motor faults. Results of simulations and experiments are compared to each other to verify the accuracy of the proposed models. Experiments are achieved using 3.7 kW, 3-phase, and squirrel cage induction motors with a motor drive inverter.

• Journal of Korean Biological Nursing Science
• /
• v.18 no.4
• /
• pp.274-279
• /
• 2016

Purpose: Adolescents who experienced the alcohol consumption have gradually increased. Adolescence is a critical period of the neural plasticity in the brain. Neural plasticity is mediated by neurotrophins and has an impact on cognitive function. Environmental enrichment ameliorates the cognitive function and increases neurotrophins. Thus, we investigated the neuroprotective effect of environmental enrichment on ethanol induced cognitive impairment in adolescent rats. Methods: The ethanol groups and the controls groups were injected with ethanol (0.5g/kg) and phosphate buffered saline, respectively, through intraperitoneal from 28th day of birth for 11 days. The environmental enrichment groups were provided larger cages containing toys than the standard cage. Passive avoidance test and Y-maze test were performed to evaluate the spatial memory. Results: Environmental enrichment+ethanol group showed higher alterations than the standard environment+ethanol group in Y-maze test (p<.05). In hippocampus, The environmental enrichment+ethanol group showed significantly higher level of the number of c-fos positive celsl and density of tropomyosin receptors kinase B receptor than the standard environment+ethanol group (p<.05). Conclusion: So, we suggested that the environmental enrichment played a role as a prophylaxis for prevention of memory impairment induced by ethanol exposure in adolescence.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.8
• /
• pp.370-376
• /
• 2005

The single-phase induction motor is simple and durable, but the efficiency is low. Therefore, electric motors like HLDC and LSPM(line-start permanent magnet motor) that use the permanent magnet have been studied. The most advantages of single-phase LSPM is having the same stator as the stator of the single-phase induction motor and permanent magnets are just inserted in the squirrel cage rotor of the single-phase induction motor. But the characteristics of single-phase LSPM synchronous motor has very complex characteristics until the synchronization and if the design is not suitable, the single-phase LSPM synchronous motor cannot be synchronized. We designed a single-phase LSPM using the same stator and winding as the conventional single-phase induction motor, but newly designed the permanent magnets considering air gap magnetic flux density. The transient characteristics of the single-phase LSPM is not good because of a magnetic breaking torque, however, it can be improved by redesigning the rotor bars. We are proposed the design method of rotor bar for the single-phase LSPM to start softly and to make synchronization easily.