• Journal of Korean Society for Geospatial Information Science
• /
• v.9 no.2 s.18
• /
• pp.47-54
• /
• 2001

The aim of this study is to represent the effective method for undertaking cadastral surveying works through analyzing and comparison of the surveying results both Total Station and GPS surveying techniques. in the value of coordinate of land parcels, the surveying results of using Total Station and Real Time Kinematic GPS surveying are compared and anayzed. As a results, each axis X and Y differences are ${\Delta}X=0.02m\;and\;{\Delta}Y=0.02$. Therefore the latter surveying method is available to use for production of numerical casdastral map at a large scale and for field surveying in farmland adjustment area. Furthermore travers surveying is not needed to be done when horizontal position of the boundary of a land parcel is determined by the method of RTK. It is recognized as a effective and efficient method in rapaid, accurate and economical aspects.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.11-22
• /
• 2005

It is necessary to arrange and analyze the collected research date to get regularity such as characteristics, merits and demerits, and possibility in city when constructing land information by analyzing linkage and utilization of cadastral information as the fundamental data for land information around the acreage of a lot and by expressing the purpose of each digital data construction with map. In short, that is the work to classify data, to make chart or map, or to analyze using statistical technique. Some information in land utilization had been used by computerization, but several problems were found in common use of total divisions. The most important problem is, in the case of drawing information, that topographical map with building boundary and land registration map with acreage boundary cannot be used together. In the case of property information, common utilization of property information that is basically needed and standard measurement of usage classification are necessary. The characteristics of the land usage data by the rearrangement of the cadastral information. etc. is presented as the basic data for the land information orientation, and the analyzing result of the data should be expressed and controlled on the map as the fundamental survey for the establishment of the land information oriented planning supports the physical space planning of the land cadaster finally. In this research, the problem in establishing current land information around acreage of a lot was found to research data to be needed in land information for utilizationof space based digital information, and was studied the method in relation to GIS.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.80-93
• /
• 2016

Parcel boundary demarcation in agricultural area is commonly performed by terrestrial surveying methods, which have been pointed out as drawbacks to require consuming too much time and heavy expenditure. With the developments of high performance digital aerial cameras, however, studies on cadastral boundary demarcation with an aerial photogrammetric method attract a great attention in recent years. In this paper, an approach is presented to rapidly demarcate parcel boundaries coinciding with real ground ones in agricultural areas by extracting boundaries from the high resolution aerial orthoimages based on aerial targets. In order to investigate the feasibility of the proposed method, the accuracy of coordinates and area of parcel boundaries extracted from the aerial targets appeared in orthoimages compared with that of terrestrial boundary surveying results over the selected two test agricultural areas. Aerial image data were processed taken by a ADS80 digital camera with a GSD of 8cm in Changwon region, and by a DMCII camera with a GSD of 5cm in Suwon respectively. The result shows that the accuracy of parcel demarcation using aerial images is within the tolerance limits of coordinates and areas compared with that of terrestrial surveying. The proposed method using aerial target-based high resolution aerial images is therefore expected to be usefully applied in the agricultural parcel demarcation.

• Spatial Information Research
• /
• v.6 no.1
• /
• pp.103-120
• /
• 1998

"The Plan for the Development of the National Geographic Information System" designates the following six major thematic maps as the main subject of digital mapping project: topographic-cadastral maps; administrative boundary maps; land use maps; road network maps; national land zoning maps; and urban planning maps. Carrying out the digital mapping project requires standards and guidelines for digitizing process. However, there is neither standards nor guidelines with regard to thematic map production. This study describes the steps involved in producing thematic maps and provides the best procedural alternative for the production of thematic maps. Based on procedural alternative suggested by this study, actual digital maps have been experimentally produced for the selected area, Anyang-Si Dongan-Gu. The results of this experimental work have been utilized to government for not only making the guidelines but also initiating plans for the development of thematic map production.roduction.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.389-393
• /
• 2010

The Objective of this study was to develop a system for visualizing inundation area by using 1-D numerical model analyzing damage information such as inundation area, facilities, land usages, population, building, loads. In this study, we have reviewed hydraulic models to select a flood model for simulation of discharges, water depths and velocities. The study area is Namhan River from Youngwol to Paldang Dam which had a flood damage on upper and below regions of Chungju Dam by a storm event in 2006. At the first, we developed the DB system base on GIS thematic map, ortho images, cadastral maps to analyze flood damages and support decisions making. Changing the boundary conditions such as discharge at the gauging stations, flood simulations were performed and then damages were extracted from the databases information support system based on 1-D numerical hydraulic model, it is expected to be able to analyze flood damages and support a decision making for reduce flood relate damages. In the future, the system developed in this study could be applied for flood forecasting system of small scaled streams.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.119-123
• /
• 2009

In the areas of civil engineering or cadastral surveying, multi-orientation process such as setting out boundary mark is regarded as one of the important tasks, measuring land feature and indicating acquired data to the grounds. In case of using dual frequency receiver and TS(total station), there are much advantages in setting out surveying results in the field. However, it costs very expensive and the equipments for enhancing correctness are very complex. In this study, technical factor was reviewed in which single frequence receiver and TS, comparatively cheap and easy to establish a system, was connected into TS(Total Station) in order to make easy to orientation and setting out. As a result of this study, it was possible to support GPS and TS surveying and set out it by short distance wireless communication method using single frequency GPS receiver. And by developing the system, it also could lessen the time of setting out in large areas and difficulty of the surveyors in the field.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.61-67
• /
• 2001

This study aims to develop the Extended Urban Land Information System (EULIS) which can support the sustainable urban management. Although the existing Urban Land Use Information system (ULUIS) that aids the micro-level land use information is a good means for the understanding of urban spatial structure and district-level planning and management (such as urban design, redevelopment planning and district-level transportation planning, etc.), it has some limitations in supplying the information for sustainable urban management, such as environmental and traffic analysis, urban infrastructure's carrying capacity analysis, etc. The EULIS is designed to efficiently supply the information for sustainable urban management. For the successful construction of EULIS, the followings have to be considered. 1) the integration of topographic maps which contain the building's footprints and cadastral maps which contain the parcel's boundary, 2) the integration of EULIS and FM (Facility Management) system for the full utilization of information about capacity analysis of infrastructure, 3) the construction of standardized georeferencing system and spatial unit for the combined use of environment and traffic census data. This study shows 1) why EULIS is needed for the sustainable urban management and which elements are needed for the system,2) the E-R data model for the EULIS, 3) the strategies for the construction of EULIS and 4) the conclusion.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2593-2600
• /
• 2013

The main purpose of this study is to carry out the performance evaluation of Ultra-light Fixed Wing UAV(Unmanned Aerial Vehicle) photogrammetry which is being, currently, applied for various fields such as cultural assets, accident survey, military reconnaissance work, and disaster management at home and abroad. Firstly, RMSE estimation of Aerial Triangulation (AT) are within approximately 0.10 cm in position (X, Y). And through the comparison of parcel's boundary points coordinates by terrestrial surveying and by UAV photogrammetry, the analysis shows that RMSE are shifted approximately 0.174~0.205 m in X-direction, 0.294~0.298 m in Y-direction respectively. Lastly, parcel's area by orthophoto of UAV photogrammetry and by that of cadastre register has been shown the difference by 0.118 m2. The results presented in this study is just one case study of orthophoto accuracy assessment of Ultra-light fixed wing UAV photogrammetry, hereafter various researches such as AT, direct-georeferencing, flight planning, practical applications, etc. should be necessary continuously.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.143-152
• /
• 2010

These days, we can't confirm cadastre information about stereoscopic digital map that was consist of 2 dimensions and more difficult to understand of detailed parcel boundary, area, land using for 3 dimensions. An each local government providing three-dimensional that are connected to an aerial photograph with cadastre maps. Satisfaction is high for citizens but, this service additional cost for purchase of an aerial photograph order to provide of it. So far, in various ways are under study about three dimensions using Google Earth which is possible to provides 3 dimensional information by real time for individual parcel situation. The purpose of this study was analyzed an accuracy of overlapping between cadstre maps and an image on Google Earth Web in the each different coordinates system. Also, this paper could be provided for use possibility of 3 dimensions information service with an indicator of using or a guideline of direction for local government which provide 3 dimensions information oneday.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.163-180
• /
• 2020

In this study, to build a spatial information infrastructure, which is a component of a smart city, a 3D digital twin model in the downtown area was built based on the latest spatial information acquisition technology, the drone. Several analysis models were implemented by utilizing. While the data processing time and quality of the three types of drone photogrammetry software are different, the accuracy of the construction model is ± 0.04 in the N direction and ± 0.03m in the E direction. In the m and Z directions, ± 0.02m was found to be less than 0.1m, which is defined as the allowable range of surveying performance and inspection performance for the boundary point in the area where the registration of the boundary point registration is executed. 1: 500 to 1 of the aerial survey work regulation: The standard deviation, which is the error limit of the photographic reference point of the 600 scale, appeared within 0.14 cm, and it was found that the error limit of the large scale specified in the cadastral and aerial survey was satisfied. In addition, in order to increase the usability of smart city realization using a drone-based 3D urban digital twin model, the model built in this study was used to implement Prospect right analysis, landscape analysis, Right of light analysis, patrol route analysis, and fire suppression simulation training. Compared to the existing aerial photographic survey method, it was judged that the accuracy of the naked eye reading point is more accurate (about 10cm) than the existing aerial photographic survey, and it is possible to reduce the construction cost compared to the existing aerial photographic survey at a construction area of about 30㎢ or less.