• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.8
• /
• pp.727-734
• /
• 2015

Currently, polyurethane (PU) foam is used in most refrigerators as a thermal insulator, whereby the material contributes to structural stiffness by joining the refrigerator cases; however, refrigerator PU foam induces a low thermal efficiency and results in environmental contamination. To resolve these issues, we applied the vacuum insulated panel (VIP) instead of PU form in the design of a new refrigerator type, whereby the VIP significantly contributes to the rectification of the previously mentioned issues. The VIP structure, however, cannot effectively hold refrigerator cases, so the present study investigated a new frame-structure concept by evaluating the stiffness using the topology optimization of refrigerator cases. Lastly, a refrigerator prototype comprising an optimal frame structure was built and subject to a stiffness test, and a comparison of the test results with those of a conventional refrigerator show that the structural stiffness of the prototype is sufficiently effective.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.745-750
• /
• 2009

In Korea, since the implementation of the GMO Law, the intrest of biosafety level 3(BL3) lab. is increasing. In this study, using CONTAM which is applying multizone modelling, the multizone simulation for design verification of BL3 lab. was performed. In BL3 lab., because required air change rate is greater than general estimated air-conditioning load and it is difficult to maintain room pressure difference efficiently, to maintain pressure difference between laboratory rooms is important through sealing condition of doors and proper airflow control of laboratory rooms. In this study, about BL3 lab.(M. tuberculosis research lab.), the multizone simulation for four kind of biohazard scenarios was performed in the case of unexpected spread of contaminants in the laboratory room, anteroom, corridor and inside of BSC. Multizone simulation results show that these approach methods are used as a tool for the design and verification of BL3 lab.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.12
• /
• pp.671-677
• /
• 2009

In Korea, since the implementation of the LMO Law, the interest of biosafety level 3(BL3) lab. is increasing. In this study, using CONTAM which is applying multizone modelling, the multizone simulation for design verification of BL3 lab. is performed. In BL3 lab., because required air change rate is greater than general estimated air-conditioning load and it is difficult to maintain room pressure difference efficiently, to maintain pressure difference between laboratory rooms is important through sealing condition of doors and proper airflow control of laboratory rooms. In this study, about BL3 lab,(M. tuberculosis research lab.), the multizone simulation for four kind of biohazard scenarios is carried out in the case of unexpected spread of contaminants in the laboratory room, anteroom, corridor and inside of BSC. Multizone simulation results show that these approach methods are used as a tool for the design and verification of BL3 lab.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.741-743
• /
• 2004

In this paper, we describe a Control Element Drive Mechanism(CEDM) operation test using a Power Controller. By testing, we can catch the mechanical and electrical characteristics of CEDM and obtain the information about the improvement of CEDM and the design of CEDM power cabinet. The power controller for CEDM introduced in this paper can input firing angles directly into gate drive circuits of thyristors so that this method can be used to derive the maximum and minimum values of firing angles within available limits for a 3-phase half-wave rectifier. Angle inputs help us understand each coil's response characteristics. Since this power controller generates a serial sequence for CEDM insertion and withdrawal operations, we may judge whether CEDM works correctly as expected or not in each phase of a step movement.

• Journal of the Korea Furniture Society
• /
• v.21 no.5
• /
• pp.432-438
• /
• 2010

The study aimed at investigating the terms for each type of the current household furniture and at analyzing a standard based on those terms researched for the furniture, not including kitchen and child furniture. The study was conducted in sales and R&D division of major furniture brands such as Jang-In Gagu, Borneo, and Livart by surveying their staffs, and then, the investigated names were classified according to similar criteria and it was finally analyzed by the definite standard of the names made. In the results, the following 5 standards largely play roles for the naming. First, name according to requirements, second, construction of door, third, materials, fourth, shapes, and lastly, function. Except for the terms of "Sobari" expressed only as Japanese and "living room cabinet of Extension-type" using Korean and English along, most of the names show furniture in detail, and the names from Hangeul, Korean alphabet and from the English have recently and drastically increased with the lifestyle change influenced from Western world.

• Journal of Convergence for Information Technology
• /
• v.11 no.10
• /
• pp.27-35
• /
• 2021

The purpose of this study is to perform spatial restructuring by user participation design as one of the school space innovation projects. The contents of this study were conducted through the process of deriving and applying various requirements and specific ideas while communicating through the user participation process targeting Y Elementary School in Busan. As a result of the study, the space design was pursued in various ways, away from the uniform educational space of grades 1-6. This study focuses on the development of various space designs that reflect the characteristics of each grade level, and it is characterized by a built-in cabinet for each person to secure a personal space. For a space created by innovation, It can be seen that for a space created by innovation, it is essential to design based on the user participation of various people who use the space.

• Journal of the Korea Furniture Society
• /
• v.26 no.1
• /
• pp.61-70
• /
• 2015

There is an increasing trend each year in the number of subway users due to increase in the traffic volume. As the number of train service has risen, the subway drivers are given heavy work and from the same, are put at risk of mental health deterioration due to stress. As this is directly connected to safety, there is an urgent need for improvement of the situation. Therefore, as a way to appropriately relieve such stress, resting space where mental and physical energy can be recharged is necessary. Thus, this research conducted a survey of demand with subway drivers as subjects in order to provide resting space that can offer healthy rest and increase work effectiveness. 50 subway drivers were the subjects of this survey. As a result of analyzing the contents of the survey, environmental satisfaction was shown to be the lowest compared to psychological and morphological satisfaction. In the case of sleeping room, they wanted more comfortable and individual space. And the waiting room had the highest rate of usage frequency. The storage space was where the subway drivers showed the strongest attachment and was shown to be the only personal space. Most were shown to be satisfied with the outdoor space, but it had the lowest usage frequency. In addition, it is nessasery customized storage cabinet designed for subway drivers should be produced, which can effectively arrange the limited space. I hope that these direction of improvement can increase the healthy rest and work effectiveness of the locomotive engineers as it is directly being connected to the health and safety of the citizens.

• Korean Institute of Interior Design Journal
• /
• v.19 no.2
• /
• pp.234-242
• /
• 2010

The twenty seven houses at Incheon city, were remodeled in 2009 for the physically handicapped people. This research had been done the analysis of the itemized questionnaire by the needs of the physically handicapped for their better living environment and suggested the following remodeling devices. First of all, there was the priority for the remodeling of their living facilities. According to their priority, they wanted to remodel their bathroom, kitchen & dining room, veranda, living room, and hall way. These were based on their needs of movement, personal hygiene, convenient closet, and cabinet usage. In particular, their demands were shown as followings. The wheelchair using handicapped people required safe doorknobs, unslippery floor materials, removal of step levels, and heights adjustable washing stand for their bathroom. They also requested washboard, non-threshold, and automatic door locks. Otherwise, the disabled in critical condition who could not move anything preferred the remodeling of inner structure of living spaces and automatic door system. The slight disabled and the families those who have the disabled demanded the remodeling of kitchen & dining room, and preferred the reorganization of closet, cabinets, floor tiles, and turncock. The remodeling of bedroom was mostly requested by the disabled women, people with the brain disorder, and disabled people in critical condition who could not move anything. They wanted the remote controlled lightings.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.05a
• /
• pp.49-55
• /
• 2004

The purpose of this study was to explore typical behaviors of spatial usages such as patterns of spatial usages, perception on residential spaces, and furniture arrangement. A questionnaire survey and interview were adopted in this study, and 146 residents living in apartment with 3 bedrooms, stairway access, and 3-bay style in the City of Gwangju. The major findings of this study were that 1) dining-kitchen (DK) was conceived and used as a space not only for dining but also family gathering and guest reception. Dining table without refrigerator was frequently found in furniture arrangement of DK, and refrigerator has been relocated in utility room facing DK. The results imply the need for social interaction that has been growing. Anbang (master bedroom) has been perceived and used as couples' private area, aside from the traditional function of family interaction. A coordination of both bed and wardrobe out of different furniture arrangements was popular in anbang. Living room was used as a multi-purpose room carrying out various activities such as family gathering, guest reception, and housekeeping. Sofa and cabinet were the most common furniture arrangement in living room. The research results are a basis for residential open housing system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.3
• /
• pp.137-143
• /
• 2014

A gasket is known as an important component for mechanical sealing between mating surfaces. In case of the refrigerator, a gasket is generally installed into the edge line of a door to prevent cold air leaking out from the inside of a cabinet. The gasket shape used in a refrigerator is very complicated; it has a few deformable small rooms and wings (upper part) and inserting part (lower part) into the door. By the intricate shape, it takes much time and trouble on analysis by using a full-shape model. To settle down this problem, an effective design way of a gasket is proposed in this work. The inserting part is parametrically designed using FEM without considering the complicate upper part, Through this work, computational time and efforts are much reduced comparing to the full-shape analysis method. And the performance of a newly designed gasket was evaluated qualitatively.