• Economic and Environmental Geology
• /
• v.31 no.5
• /
• pp.399-413
• /
• 1998

Daegang granite is located around the Namwon-gun, Cheolabuk-do, and is an elongate stock $(80 km^{2})$ in the NNE-SSW direction. Daegang granite has the very same mineralogical and geochemical characteristics as those of the typical A-type granites; (1) it is a one feldspar hypersolvus granite, and is classified as an alkali feldspar granite in the lUGS scheme, (2) has small amounts of Fe-rich biotite (annite) and alkali amphibole (ribeckite) that are late in the crystallization sequence of the granitic magma, (3) always contains opaque oxides, fluorite and zircon, (4) shows high and quite homogeneous $SiO_2$, content (mostly 72~77 wt.%) and $(Na_{2}O+K_{2}O)/Al_{2}O_{3}$ ratio (0.90~0.98), (5) contains high Ga, lOOOO*Ga/Ai, $K_{2}O+Na_{2}O$, $(K_{2}O+Na_{2}O)/CaO$, $K_{2}O/MgO$, FeO/MgO, agpaitic index, Zr, Nb, Ce, Y, Zn value or ratio that resemble to those of the Australian A-type granites (Whalen et al., 1987), and (6) has enriched LREE and HREE that show flat variation pattern with slightly depleted in HREE and profound Eu anomalies (Eu/Eu*=0.04~0.l4). In the tectonic discrimination diagrams of Pearce et al. (1984) and Eby (1992), Daegang granite is classified as a within plate granite and $A_{2}-type$.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.470-475
• /
• 2013

Zr-benzendicarboxylate structure, UiO-66 was prepared in 1-L batch scale by using a unique sonochemical-solvothermal combined synthesis method. The produced UiO-66 showed uniform particles of ca. $0.2{\mu}m$ in size with the BET surface area of $1,375m^2/g$ in high product yield (>95%). The UiO-66 showed 198 and 84 mg/g $CO_2$ adsorption capacity at 273 K and 298 K, respectively, with excellent $CO_2$ selectivity ($CO_2:N_2=32:1$) at ambient conditions. The isosteric heat of $CO_2$ adsorption varied from 33 to 25 kJ/mol as the adsorption progressed. The UiO-66 tested for xylene isomer separation in a liquid-phase batch mode confirmed preferential adsorption of the adsorbent for o-xylene over m-, and p-xylene.

• The Journal of the Petrological Society of Korea
• /
• v.22 no.2
• /
• pp.137-151
• /
• 2013

This study is focused on element behaviors and mineral compositions of the fault rock developed in Yongdang-ri, Yangbuk-myeon, Gyeongju City, Korea, using XRF, ICP, XRD, and EPMA/BSE in order to better understand the chemical variations in fault rocks during the fault activity, with emphasis on dependence of chemical mobility on mineralogy across the fault zone. As one of the main components of the fault rocks, $SiO_2$ shows the highest content which ranges from 61.6 to 71.0%, and $Al_2O_3$ is also high as having the 10.8~15.8% range. Alkali elements such as $Na_2O$ and $K_2O$ are in the range of 0.22~4.63% and 2.02~4.89%, respectively, and $Fe_2O_3$ is 3.80~12.5%, indicating that there are significant variations within the fault rock. Based on the chemical characteristics in the fault rocks, it is evident that the fault gouge zone is depleted in $Na_2O$, $Al_2O_3$, $K_2O$, $SiO_2$, CaO, Ba and Sr, whereas enriched in $Fe_2O_3$, MgO, MnO, Zr, Hf and Rb relative to the fault breccia zone. Such chemical behaviors are closely related to the difference in the mineral compositions between breccia and gouge zones because the breccia zone consists of the rock-forming minerals including quartz and feldspar, whereas the gouge zone consists of abundant clay minerals such as illite and chlorite. The alteration of the primary minerals leading to the formation of the clay minerals in the fault zone was affected by the hydrothermal fluids involved in fault activity. Taking into account the fact that major, trace and rare earth elements were leached out from the precursor minerals, it is assumed that the element mobility was high during the first stage of the fault activity because the fracture zone is interpreted to have acted as a path of hydrothermal fluids. Moving toward the later stage of fault activity, the center of the fracture zone was transformed into the gouge zone during which the permeability in the fault zone gradually decreased with the formation of clay minerals. Consequently, elements were effectively constrained in the gouge zone mostly filled with authigenic minerals including clay minerals, characterized by the low element mobility.

• Korean Journal of Heritage: History & Science
• /
• v.41 no.1
• /
• pp.5-19
• /
• 2008

Thirty six samples of Western asia glass vessel shards which were excavated from South Mound of Hwangnamdaechong were each measured for thickness, pore size and specific gravity and analyzed for ten major compositions and thirteen trace elements. The glass samples with colorless, greenish blue and dark purple blue were well classified by principal component analysis(PCA). All glass shards of Hwangnamdaechong belonged to Soda glass system ($Na_2O-CaO-SiO_2$) which have the range of 14~17% $Na_2O$ and 5~6% CaO. The corelation coefficients of (MgO, $K_2O$) and (MnO, CuO) showed above 0.90. The concentrations of thirteen trace elements apparently differentiated from colorless, greenish blue and dark blue glasses. We found that thirteen trace elements were very important indices for studying raw material of glass and the origin of glass making. Colorless glass : The specific gravity is $1.50{\pm}0.04$. Circle or oval circle pores are observed with regular direction in internal zone and the longest one is about 0.35 mm. The raw material of sodium must be the plant ash because sodium glasses contain HCLA(High CaO, Low $Al_2O_3$) and HMK(high MgO, high $K_2O$) and suggested to Sasanian glass. The total amount of coloring agent of colorless glass is below 1 % which is too small to attribute to the color. Greenish blue glass : The specific gravity is $1.58{\pm}0.04$. The fine pores which are 0.1~0.2mm are dispersed in internal zone. Sodium glasses are distributed to HCLA and HMK. Therefore the greenish blue glass also have used plant ash for raw material of sodium with the same as colorless glass. It was also suggested to the glass of Sasanian. The total amount of coloring agent of greenish blue glass is about 4% under the influence of working MnO, $Fe_2O_3$ and CuO. Dark purple blue glass : The specific gravity is $1.48{\pm}0.19$. There are rarely pores in internal zone. They are distributed to HCLA and LMK(Low MgO, Low $K_2O$) and suggested to Roman glass. The raw material of sodium is estimated to natron. The total amount of coloring agents of greenish blue is about 3% by $Fe_2O_3$ and CuO. These studies for western asia glass shards from South Mound of Hwangnamdaechong could be used in the future as the standard data which could be compared with those of other several graves in Korea and dispersed in foreign areas.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.745-764
• /
• 2023

In the Republic of Congo, Banded iron formations (BIFs) occur in two areas: the Chaillu Massif and the Ivindo Basement Complex, which are segments of the Archean Congo craton outcropping in the northwestern and southwestern parts of the country. They show interesting potential with significant mineral resources reaching 2 Bt and grades up to 60% Fe. BIFs consist mostly of oxide-rich facies (hematite/magnetite), but carbonate-rich facies are also highlighted. They are found across the country within the similar geological sequences composed of amphibolites, gneisses and greenschists. The Post-Archean Australian Shale (PAAS)-normalized patterns of BIFs show enrichment in elements such as SiO₂, Fe₂O₃, CaO, P₂O₅, Cr, Cu, Zn, Nb, Hf, U and depletion in TiO₂, Al₂O₃, MgO, Na₂O, K₂O, Sc, Th, Ba, Zr, Rb, Ni, V. REE diagrams show slight light REEs (rare earth elements; LREEs) compared to heavy REEs (HREEs), and positive La and Eu anomalies. The lithological associations, as well as the very high (Eu/Eu^*)_SN ratios> 1.8 shown by the BIFs, suggest that they are related to Algoma-type BIFs. The positive correlations between Zr and TiO₂, Al₂O₃, Hf suggest that the contamination comes mainly from felsic rocks, while the absence of correlations between MgO and Cr, Ni argues for negligeable contributions from mafic sources. Pr/Pr^* vs. Ce/Ce^* diagram indicates that the Congolese BIFs were formed in basins with redox heterogeneity, which varies from suboxic to anoxic and from oxic to anoxic conditions. They were formed through hydrothermal vents in the seawater, with relatively low proportions of detrital inputs derived from igneous sources through continental weathering. Some Congolese BIFs show high contents in Cr, Ni and Cu, which suggest that iron (Fe) and silicon (Si) have been leached through hydrothermal processes associated with submarine volcanism. We discussed their tectonic setting and depositional environment and proposed that they were deposited in extensional back-arc basins, which also recorded hydrothermal vent fluids.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.675-687
• /
• 2006

The purpose of this study is to determine the geochemical characteristics of the stream sediments in the Cheongpung area. So that we can understand the natural background and predict the prospects of geochemical disaster, if any. We collected the stream sediments samples by wet sieving along the primary channels and slow dried the collected samples in the laboratory and ground them to pass a 200 mesh using an alumina mortar and pestle for chemical analysis. Miner-alogical characteristics, major, trace and rare earth elements were determined by XRD, XRF, ICP-AES and NAA analysis methods. For geochemical characteristics on the geological group of stream sediments, the studied area was grouped into granitic gneiss area, metatectic gneiss area, Dado tuff area, Yuchi conglomerate area, and Neungju flow area in the Cheongpung area. Contents of major elements for the stream sediments in the Cheongpung area were $SiO_2\;47.31{\sim}72.81\;wt.%,\;A1_2O_3 \;11.26{\sim}21.88\;wt.%,\;Fe_2O_3\;2.83{\sim}8.39\;wt.%,\;CaO\;0.34{\sim}7.54\;wt.%,\;MgO\; 0.55{\sim}3.59\;wt.%,\;K_2O\;1.71{\sim}4.31\;wt.%,\;Na_2O\;0.56{\sim}2.28\;wt.%,\;TiO_2\;0.46{\sim}1.24\;wt.%,\;MnO\;0.04{\sim}0.27\;wt.%,\;P_2O_5\;0.02{\sim}0.45\;wt.%$. The con-tents of trace and rare earth elements for the stream sediments were $Ba\;700ppm{\sim}8990ppm,\;Be\;1.0{\sim}3.50ppm,\;Cu\;6.20{\sim}60ppm,\;Nb\;12{\sim}28ppm,\;Ni\;4.4{\sim}61ppm,\;Pb\;13{\sim}34ppm,\;Sr\;65{\sim}787ppm,\;V\;4{\sim}98ppm,\;Zr\;32{\sim}164ppm,\;Li\;21{\sim}827ppm,\;Co\;3.68{\sim}65ppm,\;Cr\;16.7{\sim}409ppm,\;Cs\;2.72{\sim}37.1ppm,\;Hf\;4.99{\sim}49.2ppm,\;Rb\;71.9{\sim}649ppm,\;Sb\;0.16{\sim}5.03ppm,\;Sc\;4.97{\sim}52ppm,\;Zn\;26.3{\sim}375ppm,\;Ce\;60.6{\sim}373ppm,\;Eu\;0.82{\sim}6ppm,\;Yb\;0.71{\sim}10ppm$.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.80-93
• /
• 1993

Jido kaolin deposits developed in the rhyolitic tuff of Cretaceous are located in the western part of Sinan-gun, Jeonranam-do. Jido kaolin deposits is predominantly composed of pyrophyllite, kaolinite and illite. On the basis of mineral assemblage Jido kaolin deposits can be divided into three alteraion zone from the center of alteration to the margin; kaolinite, kaolinite-pyrophyillite and pyrophyillite zones. Discriminant analysis show that $Al_2O_3$, $K_2O$, $Na_2O$, CaO of major elements are discriminant elements classifying kaolinite, kaolinite-pyrophyllite and pyrophyllite zones, while in case of trace elements Cr, Ni, Sc, Zn, and Zr are discriminant elements. Kaolin deposits has been formed by the hydrothermal alterations of the volcano rocks such as rhyolitic tuff and lapilli tuff, in late cretaceous. On the basis of the results of X-ray diffraction analysis, the deposits can be classified into three types of minerals assemblages; kaolinite, kaolinite-pyrophyllite and pyrophyllite zones. All the assemblages contain quartz and muscovite, but the kaolinite zone contains kaolinite, illite and chlorite, the kaolinite-pyrophyllite zone contains kaolinite, pyrophyllite and the pyrophyllite zone contains illite and pyrite.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.1
• /
• pp.9-22
• /
• 2023

Spin-off pyroprocessing technology and inert anode materials to replace the conventional carbon-based smelting process for critical materials were introduced. Efforts to select inert anode materials through numerical analysis and selected experimental results were devised for the high-throughput reduction of oxide feedstocks. The electrochemical properties of the inert anode material were evaluated, and stable electrolysis behavior and CaCu generation were observed during molten salt recycling. Thereafter, CuTi was prepared by reacting rutile (TiO₂) with CaCu in a Ti crucible. The formation of CuTi was confirmed when the concentration of CaO in the molten salt was controlled at 7.5mol%. A laboratory-scale electrorefining study was conducted using CuTi(Zr, Hf) alloys as the anodes, with a Ti electrodeposit conforming to the ASTM B299 standard recovered using a pilot-scale electrorefining device.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.132-132
• /
• 2001

옥천변성대의 충주-황강리 지역내 앰피볼라이트의 기원암은 염기성 화성암으로 쏠레이아이트 계열의 변이질암에 속한다. Fe $O^{*}$/MgO값의 변화에 대하여 분별작용에 의해 영향을 받는 주성분 원소와 미량원소들의 변화를 보게되면 Ti $O_2$, Fe $O^{*}$와 불호정성 원소(incompatible element)인 Zr, Nb, Hf, Ta, Th 등은 분별작용동안 증가하는 반면 호정성 원소(compatible element)인 MgO, $Al_2$ $O_3$, Ni, Cr 등은 감소하는 경향을 보여주고 있다. Fe $O^{*}$/MgO, Ti $O_2$ 그리고 Fe $O^{*}$는 심해성 쏠레이아이트 영역으로부터 분화된 경향을 나타내 주고 있다. Ni, Cr은 Fe $O^{*}$/MgO값의 증가에 따라 급속히 감소하며 안정한 대륙과 해저화산의 영역에 도시되고 있으며 칼크-알칼리(CA)와는 관계가 없고 쏠레이아이트의 영역에서 변화 패턴을 보여주어 앰피볼라이트가 활동적인 대륙연변부의 지구조 환경보다는 안정한 대륙이나 해저화산과 관계가 더 있음을 시사한다. 경휘토류 원소(LREE)는 중휘토류 원소(HREE)에 비해 더욱 부화된 특성을 띠고 원자번호가 증가하면서 표준화된 휘토류 원소패턴의 경사가 점차 감소하는 경향을 보여주고 있다. 대부분의 시료들은 큰 Eu이상치를 갖고 있지 않아 마그마 정출 과정동안 사장석의 분별작용이 거의 수반되지 않았음을 지시하고 전체적인 휘토류 원소의 패턴은 거의 평행하게 나타나므로 기원 마그마가 유사함을 의미하고 있다. 비유동성 원소를 이용한 여러 판별도표들을 통해서 본암은 대륙성 현무암질암으로서 판내부 환경에서 유래되었으며 대륙내부 열곡의 알칼리 현무암과 대륙성 현무암 영역에 속하는 것으로 보아서 대륙지각내 열곡작용과 같은 장력운동에 수반되어 생성된 것임을 시사해 주고 있다. 앰피볼라이트의 지각혼성화를 평가하기 위해 이에 필요한 몇 개의 지화학적 매개변수를 계산한 결과 La/Ta, La/Nb, Nb/Th들의 값이 오염 안된 마그마의 값을 지시해 주어 본암이 지각혼성화 작용을 받지 않은 것으로 나타났다. 대부분의 시료들은 P-타입 MORB의 영역에 속하며 소수의 시료가 T-타입 MORB의 영역에 도시되고 있어 본 앰피볼라이트의 생성에는 양적으로 다른 두 가지의 유사한 마그마가 수반된 것으로 추정된다. 것으로 추정된다.

• Journal of the Korean earth science society
• /
• v.21 no.5
• /
• pp.595-610
• /
• 2000

This study has been designed to elucidate the petrography and geochemical characteristics of the volcanic rocks and focused on petrogenesis and tectonic environment of the Bokyeongsa volcanics in the northeast Gyeongsang Basin. The Bokyeongsa volcanics consist of the Naeyeonsan tuff which include rock fragment plagioclase, quartz and hornblende and pumice showing welded structures, and felsite. According to the petrochemical data, the Naeyeonsan tuff and felsite are in the range of 68${\sim}$71wt% and 77wt% SiO$_2$ content respectively. The Naeyeonsan tuff belongs to dacite/rhyodacite, and felsite to rhyolite. These volcanics rocks belong to the calc-alkaline rock series on the TAS diagram and the AFM diagram. The variations of major elements of the volcanic rocks show that contene of TiO$_2$, Al$_2$ O$_3$, FeO$^T$, MnO, MgO, CaO are inversely proportional to those of SiO$_2$, but contents of K$_2$O are positively. They represent differentiation trend of calc-alkaline rocks series. In spider disgram of MORB-normalized trace element partterns, contents of K, Rb, Th and Ta are relatively high, but those of Nb, Zr, Hf, Ti, Y and Yb are nearly similar to MORB. In the chondrite-normalized REE patterns, light REEs are more enriched than heavy REEs. The trace element composition and REE patterns suggest that they are typical island-arc calc-akaline volcanic rocks formed in the tectonomagmatic environment of subduction zone under continental margin.