• The Korean Journal of Mycology
• /
• v.14 no.3
• /
• pp.209-214
• /
• 1986

In order to study the trehalase (EC 3. 2. 1. 28) from mushroom, Agaricus bisporus Lange Sing., the crude trehalase preparation was separated by fractionation of mushroom extracts with ammonium sulfate between 0.4 and 1.0 saturation, and its properties were examined. Mushroom trehalase showed optimum pH 6.0, and optimum temperature $40^{\circ}C$. The enzyme was stable at pH range between 5.0 and 7.0, and at temperature below $50^{\circ}C$. The activities of crude trehalase had proportional relations with enzyme concentrations below 490.2 mg % of protein and with substrate concentration below $2.6{\times}10^{-3}M$, showing a Km value of 0.760 mM. The enzyme was inhibited by some metal ions such as $Sn^{2+}$, $Ca^{2+}$, $Hg^{2+}$, $Cd^{2+}$, $Cu^{2+}$, $Mn^{2+}$, $Zn^{2+}$, $Al^{3+}$, and $Fe^{3+}$, while $Ag^{+}$, $Ba^{2+}$, and $Mg^{2+}$ demonstrated remarkable increasing effects on the enzyme activity.

• Analytical Science and Technology
• /
• v.22 no.5
• /
• pp.422-431
• /
• 2009

The analytical results of wear metals such as Na, Mg, Al, Si, P, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Mo, Ag, Cd, Sn, Ba, Pb in oil samples are compared by portable and bench-top XRF methods as a basic study for the development of portable X-ray fluorescence spectrometer. The instrumental parameters such as measurement time of portable and bench-top XRF were optimized using certified reference materials of hydrocarbon oil with 20 wear metals in concentration range from 10 to 900 mg/kg. The analytical results of 20 wear metals in certified reference materials and new/used engine oil samples were compared by empirical and fundamental parameter methods.

• The Korean Journal of Physiology and Pharmacology
• /
• v.14 no.5
• /
• pp.249-256
• /
• 2010

Gender differences in the trace elements of monkey sino-atrial (SA) node were investigated in a process of age-dependent alterations. Sixty hearts from Japanese and rhesus monkeys (30 male and 30 female) used were aged ranging from 1-day- to 30-year-old. The elements were analyzed using an inductively coupled plasma-atomic emission spectrometer (ICP-AES). Advancing age decreased all the trace elements. Ca, P, S and Mg significantly decreased. The correlation coefficients of Ca and P were $-0.178{\pm}0.081$ (p<0.05) and $-0.088{\pm}0.022$ (p<0.05) in male (n=30), and $-0.095{\pm}0.026$ (p<0.05) and $-0.069{\pm}0.017$ (p<0.05) in female (n=30), respectively. The age-dependent coefficients for Fe/Ca, Zn/Ca, Fe/P, Fe/S, Zn/S, Fe/Mg and Zn/Mg were exhibited markedly in male, but all was less in female. In gender-related differences, only a ratio of P/Ca (p<0.05) was significantly observed with ageing. The trace elements such as Cu, Se and Sn were less detected in the SA nodes. These results indicate that the age-dependent changes in the ratios of elements are appeared more rapidly in male monkey SA node, and the gender difference is observed in ratio of P/Ca. The different attenuations may be involved with the age- and gender-related SA nodal functions.

• Analytical Science and Technology
• /
• v.22 no.3
• /
• pp.235-246
• /
• 2009

The analyses of minor and trace elements in glass debris were performed using LA-ICP-MS in order to identify manufacturers using real commercial samples. At first, a calibration curve was made using standard glass samples of NIST 610, 612, 614 and 616. $^{29}Si$ was used as an internal standard, and the ratios of metal/Si for each metal were compared with their concentrations. Based on elements in each sample and standard materials, 24 metals were quantified and the LOD in analysis, according to the blank sample, was in the range of 0.11 mg/kg (Ti)-4.91 mg/kg (Ca). Eleven samples from two manufacturers were collected and five sub-samples were taken from each sample for analysis. 15 elements (Co, Ce, Ca, Mn, Sr, Ba, Li, Rb, U, La, Th, Na, Al, Zr and Hf) were selected to identify manufacturers because some elements (Cu, Cr, Cd and Ni) were below the detection limit and some elements (Ti, Pr, Mg, Nb, Nd) were absent in the analysis of standards and others (Pb and Sn) had a problem of homogeneity. The attempts to identify manufacturers and the manufacturing period were performed through a triangular diagram. In the manufacturer discrimination by discriminant analysis, a canonical discriminant function was made based on Mn, Ce and Rb, and each sample could be identified.

• Korean Journal of Materials Research
• /
• v.7 no.8
• /
• pp.660-667
• /
• 1997

AI-Mg-합금의 용융산화에 의해 생성되는 AlO$_{2}$O$_{3}$-복합재료의 미세구조에 미치는 합금원소의 영향을 연구하였다. AI-1Mg 합금과 AI-3Mg 합금을 기본으로하여 Si, Zn, Sn, Cu, Ni, Ca, Ce를 1, 3, 5 %를 무게비로 첨가하였다. 각 합금을 1473K에서 20시간 유지하여 산화시킨 후 산화층의 거시적 형상과 미세구조를 광학현미경으로 관찰하였다. 각 미세구조의 상분율을 상분석기로 측정하였다. 산화층의 최첨단면은 SEM과 EDX로 관찰하고 분석하였다. Cu나 Ni를 첨가한 합금으로부터 성장한 산화층의 미세구조가 가장 치밀하였다. Zn이 포함된 합금으로부터 성장한 산화층 최첨단 성장면에는 ZnO가 관찰되었다. Zn이 포함되지 않은 다른 합금의 성장 전면에는 항상 MgAi$_{2}$O$_{4}$상이 관찰되었다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.309-310
• /
• 2005

Some minor elements(Al, B, Ba, Ca, Cd, Co, Cr, Cu, Gd, Mg, Mn, Mo, Nd, Ni, P, Pb, Si, Sn, Sr, Ti, V, Yb, Zn and Zr) in iron compounds such as the S/G sludge of a power plant were separated from iron by anionic and cationic exchange methods. If a ICP-AES or AAS determination follows this method, minor elements of more than 2 or 20 ppm of Fe can be determined with an error less than 20% except Sn and Mo. Alkaline elements were excluded from this study since they can be easily recovered from an anionic exchange. Application to real sludge samples is ongoing.

• Korean Journal of Plant Resources
• /
• v.3 no.2
• /
• pp.107-114
• /
• 1990

In view of the results to have measured metallic elements which is included in 45 sorts of herb medicines and surveyed their distribution, 8 kinds ofmetals including Co, Ge, Ga, TL, Cd, As, 8i, Pb, are never or little includedin almost herb medicines . Other twenty-five sorts of elements (Mo, Sc, Be, V,Ni, Sn, Se, Ba, Cr, Sb, Si, Ti, B, Li, Mg, Ca, Cr, Mn, Fe, Cu, Zn, p, Al, Na,K) are more or Less included in all herb Bedicines ana Na, Ca, p and K aremetals that are included in Large quentities in comrarison with others . Patri-uiae Radix Contains 7 kinds of metal lic elements more than other herb medicinesdoes .

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.3 no.1
• /
• pp.17-21
• /
• 1974

Tasty constituents such as free amino acids. free organic acids and free sugars and minerals in clavariaceae botrytis were surveyed through the course of this study. The results were as, follows: 1. Isoleucine valine threonine alanine methionine cysteine glutamine histidine glutamic acid and aspartic acid were presented in clavariaceae botrytis, and aspartic acid showed the highest amount. 2. Succinic acid was the major organic acid in clavariaceae botrytis, and also citric acid malic acid and fumaric acid were presented. 3. Clavariaceae botrytis contained fructose, maltose glucose and sucrose ; glucose and sucrose were more than 80% of total sugars. 4. Na K Mg Ca Zn Mn Cu am Fe by atomic absorption spectrometer were detected and assayed. and Al Si Ni Sn Ti Cr Ag Pb B and Sr detected by emission spectrograph. K of these minerals showed the highest amount but very small amount of Ca was presented.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.361-366
• /
• 2002

A. capillaris Thunberg is often used as a medicinal herb. This analysis on A. capillaris Thunberg, showing its natural ingredients and nutritive elements, is to provide a better understanding of its content and help find more various ways of use. The ingredients of A. capillaris Thunberg are as follows : 14.12% of crude protein, 4.80% of crude lipid, 2.30% of crude ash, 8.10% of crude fiber, and the rest of the ingredients are vitamins and minerals. Minerals are 3295.02 mg% of K, 2787.01 mg% of P, 1436.01 mg% of Ca, 172.32 mg% of Mg, 21.23 mg% of Fe, 18.02 mg% of Mn, 8.11 mg% of Na, 1.24 mg% of Cu, and 0.002 mg% of Sn, and vitamins are 18602.00 ug% of $\beta$-carotene and 5.82 mg% of ascorbic acid. Fatty acids in A. capillaris Thunberg are of 23.86% of oleic acids (C18:1), 46.67% of saturated fatty acids, 33.40% of monousaturated fatty acids, and 19.83% of polyunsaturated fatty acids. Oleic acid (C18:1) is the most abundant fatty acid in A. capillaris Thunberg. P/S is 0.24. A. capillaris Thunberg contains about 20 kinds of amino acid. The total amount of amino acids is 1345.29 mg%, which can be divided into 79.95% of amino acids and 13.11% of essential amino acids. This 79.95% of amino acids consist of proline, tyrosine, asparagines, glutamic acid, and valine with amount of 438.58mg%, 310.20mg%, 120.30mg%, 118.66mg%, and 88.02mg% respectively. The essential amino acid is 176.83mg%. It is shown that A. capillaris Thunberg contatins various nutrients such as minerals, vitamins, fatty acids, and amino acids, so A. capillaris Thunberg can be regarded as a highly nutritious food.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.4
• /
• pp.169-179
• /
• 2011

To investigate the controlling factor and accumulation of trace metal concentrations in Chun-su Bay sediments, grain-size, specific surface area, organic carbon content, calcium carbonate content, and concentration of Al, Fe, Na, K, Mg, Ca, Ti, Mn, P, S, Ba, Sr, Li, Co, Cr, Ni, Cu, Zn, As, Cd, Cs, Sc, V, Sn were analyzed. Controlling factors of metals were quartz-dilution, calcium carbonate and coarse sand or K-feldspar. Although the distribution of V, Co, Cr, Ni, Cu, Zn, Sn, and Cd concentration was explained by grain-size effiect, Mn and As showed the similar importance of grain-size effect and coarse sand or K-feldspar factors. By virtue of enrichment factor and 1 M HCl experiment, there were little enrichment in all the trace metals in bay sediments, which were explained well by geochemical properties of sediments. Since the concentration levels of As in coarse sand were high as much as those in fine-grained sediments and it was combined with Mn oxide (1 M HCl leached) and K-feldspar (residual), it was suggested that when the enrichment of As in sediments would be assessed, it is necessary to separate the coarse sand from bulk sediments or to use only sediments with higher than 10% in < $16{\mu}m$ fraction.