• Nuclear Engineering and Technology
• /
• v.40 no.4
• /
• pp.311-318
• /
• 2008

In modem power reactors, nuclear fuels have recently reached 55,000 MWd/MtU from the initial average burnup of 35,000 MWd/MtU to reduce the fuel cycle cost and waste volume. At such high burnups, a fuel pellet produces fission products proportional to the burnup and creates a typical high burnup structure around the periphery region of the pellet, producing the so called 'rim effect'. This rim region of a highly burnt fuel is known to be ca. $200\;{\mu}m$ in width and is known to affect the fuel integrity. To characterize the local burnup in the rim region, solid sampling in the micro meter region by laser ablation is needed so that the distribution of isotopes can be determined by ICP-MS. For this procedure, special radiation shielding is required for personnel safety. In this study, we installed a radiation shielded laser ablation ICP-MS system, and a performance test of the developed system was conducted to evaluate the safe operation of instruments.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.67-74
• /
• 2005

Toxicity tests were performed to evaluate the feasibility of application with prediction models to 10 mixture chemicals (chloroneb, butylbenzylphthalate, pendimethaline, di-n-butylphthalate, di-iso-butylphthalate, diazinon, isofenphos, 2-chlorophenol, 2,4,6-trichlorophenol and p-octylphenol) detected in effluents from wastewater treatment plants (WWTPs). Ten chemicals were selected in the basis of their toxicities to Daphnia magna and the concentrations in effluents measured by GC/MS. Three models including concentration addition (CA), independent action (IA) and effect summation (ES) were employed for the comparison of the predicted and the observed mortality of D. magna exposed to 10 mixture chemicals for 48 hours. With a comparative study it was ineffective to predict the mortality through the CA and the ES prediction model, while the IA prediction model showed a high correlation($r^2\;=\;0.85$). Moreover, the ES model over-estimated the toxicity observed by bioassay experiments about five-fold. Consequently, IA model is a reasonable tool to predict the mixture toxicity of the discharging water from WWTPs.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.278-287
• /
• 2017

In this study, lignin was efficiently degraded via two-step catalytic cracking process and lignin-oil, char, and gas was produced as lignin degraded products. Three kinds of catalysts (MgO, CaO, and Pt/C) were used in first catalytic cracking step and the highest lignin-oil yield (76.2 wt%) was obtained in Pt/C catalyst with the smallest char formation (4.1 wt%). GC-MS/FID analysis revealed that 18 kinds of monomeric phenols existed in lignin-oil and sum of them was the highest in Pt/C condition (97.8 mg/g lignin). Meanwhile, relatively lower yield of monomeric phenols was produced in MgO and CaO condition because of their absorption on catalysts. Lignin-oil produced over Pt/C was introduced to second catalytic cracking process with porous Pd/activated carbon aerogel catalyst. From this process, four kinds of monomeric phenols such as 4-ethylguaiacol, 4-propylguaiacol, 4-ethylsyringol, 4-propylsyringol were selectively produced at 0.89 - 1.82 wt% level.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.4
• /
• pp.178-184
• /
• 2010

The $12CaO{\cdot}7Al_2O_3$(C12A7) powders were successfully synthesized using combustion method with microwave-assistant and C12A7:H were fabricated by post-annealed process in Ar/H atmosphere. X-ray diffraction patterns and TGDSC were used for investigating to the precursors of crystalline and reaction depending on temperature. C12A7:H that was treated post-annealed process were investigated TG-MS and Hall-measurement for confirming H ions doping and checking electrical resistivity of C12A7:H. H ion substituted to $O^{2-}$ ions in the C12A7 cages were confirmed at $289.5^{\circ}C$ by TG-MS and C12A7:H calcined at $1000^{\circ}C$ in Ar/H=8:2 atmosphere for 8~10 h has low electrical resistivity about $10^2{\Omega}{\cdot}cm$ at room temperature.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.5
• /
• pp.823-829
• /
• 2011

This study was performed to obtain the good processing in the Rehmanniae Radix Preparata. In this study, we investigated the comparative analysis for steamed and hot-air dried Rehmanniae Radix Preparata. The results were obtained as follows : Through loss on drying analysis with each additional processing of Rehmanniae Radix preparata, there was gradual increase. Through ash analysis with each additional processing of Rehmanniae Radix preparata, there was slight increase. Rehmanniae Radix preparata had several inorganic components such as K, P, Mg, Ca, Cl, Al. P and Mg were increased gradually with each additional processing of Rehmanniae Radix Preparata. But Ca was decreased with each additional processing. We identitied 24 kinds of volatile components from extracts of various processed Rehmanniae Radix Preparata through componential analysis using GC/MS. From GC/MS analysis, we found out the content of 5-HMF Rehmanniae Radix Preparata steamed over 7 times was suitable. 5-HMF's content of 9 times steamed Rehmanniae Radix Preparata gained from GC/MS analysis is 70-fold higher than gained from HPLC. The more it is repeating steamed and hot-air dried, the more toxic volatile compound of Rehmanniae Radix Preparata is removed. Taken together, these results suggested that Rehmanniae Radix Preparata had component (especially 5-HMF) changes according to different processed steaming and hot-air drying.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.1
• /
• pp.1-6
• /
• 1999

Basic informations for direct somatic embryo formation in Rehmannja glutinosa Lib. were obtained in 500ml erlenmyer flask. The ratio of ammonium to nitrate nitrogen of 825(mg/l) : 1900(mg/l) was proper condition for somatic embryo formation from stem and petiole explants and 3% sucrose was the most effective carbon source. Full strength MS medium with 2mg/l BA was better than LS medium for somatic embryogenesis. The initial pH 5.7 of medium(full strength MS with 2.0mg/l BA and 0.1mg/l NAA) was good for embryo production. Potassium ion was taken up rapidly within 2 weeks. while $Ca^{++}$ and $Mg^{++}$ ion contents were almost constant during culture period. Sucrose hydrolysis occurred throughout the culture, while glucose and fructose were absorbed simultaneously from the third week of culture.

• Archives of Pharmacal Research
• /
• v.28 no.4
• /
• pp.463-468
• /
• 2005

The purpose of the present study was to develop a standard protocol for imidapril hydrochloride bioequivalence testing. For this reason, a specific LC-MS method was developed and validated for the determination of imidapril in human plasma. A solid-phase extraction cartridge, $Sep-pak^{R}$ C18, was used to extract imidapril and ramipril (an internal standard) from deproteinized plasma. The compounds were separated using a XTerra $MS^{R}$?C18 column ($3.5 {\mu}m, 2.1\times150 mm$) and $acetonitrile-0.1\%$ formic acid (67:33, v/v) adjusted to pH 2.4 by 2 mmol/L ammonium formic acid, as mobile phase at 0.3 mL/min. Imidapril was detected as m/z 406 at a retention time of ca. 2.3 min, and ramipril as m/z 417 at ca. 3.6 min. The described method showed acceptable specificity, linearity from 0.5 to 100 ng/mL, precision (expressed as a relative standard deviation of less than $15\%$), accuracy, and stability. The plasma concentration-versus-time curves of eight healthy male volunteers administered a single dose of imidapril (10 mg), gave an $AUC_{12hr}$ of imidapril of $121.48\pm35.81 ng mL^{-1} h$, and $C_{max} and T_{max}$ values of $32.59\pm9.76 ng/mL and 1.75\pm0.27 h$. The developed method should be useful for the determination of imidapril in plasma with sufficient sensitivity and specificity in bioequivalence study.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.5
• /
• pp.315-318
• /
• 1994

To obtain transformed plants, we cocultured cotyledonary explants of Codonopsis lanceolata with Agrobacterium tumefaciens LBA4404, a disamed strain harboring a binary vector pBI121 carrying the CaMV35S promoter-$\beta$-glucuronidase (GUS) gene fusion used as a reporter gene and NOS promoter-neomycin phosphotransferase gene as a positive selection marker in MS liquid medium with 1mg/L BA. After 48 h of culture, explants were transferred onto MS solid medium with Img/L BA, 250mg/L carbenicillin, and 100mg/L kanamycin sulfate and cultured in the dark. Numerous adventitious buds formed on the cut edges of the explants after 2 weeks of culture. When subjected to GUS histochemical assay buds showed a positive response at a frequency of 15%. Explants formed adventitious shoot at a frequency of 56.7%, after 6 weeks of culture. Upon transfer onto the basal medium, most of the shoots were rooted and subsequently the regenerants were transplanted to potting soil. Southern blot analysis confirmed that the GUS gene was incorporated into the genomic DNA of the GUS-positive regenerants.

• Mycobiology
• /
• v.43 no.4
• /
• pp.467-474
• /
• 2015

Development of efficient substrate formulas to improve yield and shorten production time is one of the prerequisites for commercial cultivation of edible mushrooms. In this study, fifteen substrate formulas consisting of varying ratios of palm press fibre (PPF), mahogany sawdust (MS), Gmelina sawdust, wheat bran (WB), and fixed proportions of 1% calcium carbonate ($CaCO_3$) and 1% sucrose were assessed for efficient Lentinus squarrosulus production. Proximate compositions of mushrooms produced on the different substrate formulas were also analysed and compared. Substrate formulations containing 85% PPF, 13% WB, 1% $CaCO_3$, and 1% sucrose were found to produce the highest carpophore yield, biological efficiency and size (206.5 g/kg, 61.96%, and 7.26 g, respectively). Days to production (first harvest) tended to increase with an increase in the amount of WB in the substrate formulas, except for PPF based formulas. The addition of WB in amounts equivalent to 8~18% in substrate formulas containing 80~90% PPF resulted in a decrease in the time to first harvest by an average of 17.7 days compared to 80~90% MS with similar treatment. Nutritional content of mushrooms was affected by the different substrate formulas. Protein content was high for mushrooms produced on formulas containing PPF as the basal substrate. Thus, formulas comprising PPF, WB, $CaCO_3$, and sucrose at 85% : 13% : 1% : 1%) respectively could be explored as starter basal ingredients for efficient large scale production of L. squarrosulus.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.591-607
• /
• 2020

This study was aimed to investigate the changes of chemical composition of the volatile organic compounds (VOCs) emitted from red pine needles in the process of needle abscission or senescence. The VOCs in intact, senescent, and litter red pine needle samples were analyzed by headspace-solid phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC/MS). And then, multivariate statistical interpretation of the processed data sets was conducted to investigate similarities and dissimilarities of the needle samples. Principal component analysis (PCA) and orthogonal partial least squares discriminant analysis (OPLS-DA) were used to investigate the dataset structure and discrimination between samples, respectively. From the data preview, the levels of major components of VOCs from needles were not significantly different between needle samples. By PCA investigation, the data reduction according to classification based on the chlorophyll a / chlorophyll b (Ca/Cb) ratio were found to be ideal for differentiating intact, senescent, and litter needles. The following OPLS-DA taking Ca/Cb ratio as y-variables showed that needle samples were well grouped on score plot and had the significant discriminant compounds, respectively. Several compounds had significantly correlated with Ca/Cb ratio in a bivariate correlation analysis. Notably, the litter needles had a higher content of oxidized compounds than the intact needles. In summary, we found that chemical compositions of VOCs between intact, senescent, and litter needles are different each other and several compounds reflect characteristic of needle.