• 한국안전학회지
• /
• 제19권1호
• /
• pp.81-87
• /
• 2004

Composite particles using inorganic and organic chemicals were synthesized and the results of those reaction were compared to variation of temperature and agitation speed in presence of $CaCO_3$ which was adsorbed SDBS. Also the synthesises were optimized according to conversion rate of composite particles. In inorganic/organic core-shell composite particle polymerization, $CaCO_3$ adsorbed by 0.5wt% surfactant SDBS was prepared initially and then core $CaCO_3$ was encapsulated by sequential emulsion polymerization using MMA at the addition of APS 3.16${\times}$$10^{-3}$mol/L to minimize the coagulated PMMA particle itself during MMA shell polymerization. Encapsulated PMMA on $CaCO_3$ as inorganic/organic core-shell particles was verified by FT-IR and DSC analysis. It was found that the $CaCO_3$ was very well encapsulated by PMMA as shell. The surfaces were distinctly found as spindle shape and broad particle distribution after capsulation.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.115.1-115.1
• /
• 2000

• 한국응용과학기술학회지
• /
• 제19권4호
• /
• pp.265-272
• /
• 2002

$CaCO_{3}$ absorbed sodium lauryl sulfate (SLS) surfactant was prepared, Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using styrene(St) as a shell monomer and potasium persulfate (KPS) as an initiator, We found that when $CaCO_{3}$; core prepared by adding 2,0 wt% SLS, $CaCO_{3}$ core/PSt shell polymerization was carried out on the surface of $CaCO_{3}$ particle without forming the new PSt particle during St shell polymerization in the inorganic/organic core-shell polymer preparation, The structure of core-shell polymer were investigated by measuring the degree of decomposition of $CaCO_{3}$ using HCl solution, thermal decomposition of polymer composite using thermogravimetric analyzer and morphology by scanning electron microscope.

• Elastomers and Composites
• /
• 제30권3호
• /
• pp.185-194
• /
• 1995

Membrane process has been employed to separate a specific substance from gas or liquid mixture, and treat wastewater. This is due to the fact that the substance of mixture can be permeated and separated selectively by membrane. Since Initial equipment and operation costs are not expensive, membrane process has been adopted in various fields such as petroleum Industry, chemistry, polymer, electronics, foods, biochemical industry and wastewater treatment. In this study, $CaCO_3$ particles impregnated in silicone rubber network were extracted by using supercritical carbon dioxide and pore distribution of silicone $rubber-CaCO_3$ was investigated with varying amount of extract. Silicone rubber has excellent mechanical properties such as heat-resistance, cold-resistance etc. and $CaCO_3$ has microporous structure. It is possible to make silicone $rubber-CaCO_3$ composite sheets via work-intensive kneading processes. In so doing $CaCO_3$ particles become distributed and impregnated in silicone rubber network. Supercritical carbon dioxide diffuse through composite sample, then sample is swollen. $CaCO_3$ in silicone rubber network Is dissolved in supercritical carbon dioxide, and its sites become pores. Pore distribution, pore shape and surface area are observed by SEM(scanning electron microscope) micrograph and BET surface area analyzer examination respectively. Pore characteristics of membrane suggest the possibilities that the membrane can be used for process of mixture separation and wastewater treatment.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.71-73
• /
• 2008

The development of polymer/inorganic nanocomposites has attracted a great deal of interest due to the improved hybrid properties derived from the two different components. Various nanoscale fillers have been used to enhance polymer mechanical and thermal properties, such as toughness, stiffness, and heat resistance. The effects of the filler on the final properties of the nanocomposites are highly dependent on the filler shape, particle size, aggregate size, surface characteristics, polymer/inorganic interactions, and degree of dispersion. In this paper, we describe the influence of different $CaCO_3$ dispersion methods on the thermal properties of polyethylene terephthalate (PET)/$CaCO_3$ composites: i.e., the adsorption of $CaCO_3$ on the modified PET surface, and the hydrophobic modification of the hydrophilic $CaCO_3$ surface. We prepared PET/$CaCO_3$ nanocomposites using a twin-screw extruder, and investigated their thermal properties and morphology.

• Corrosion Science and Technology
• /
• 제5권4호
• /
• pp.129-136
• /
• 2006

High temperature corrosion behavior of AISI-type 316L stainless steel for the MCFC(molten carbonate fuel cell) bipolar application was studied by immersion test and penetration attack method in anode environment ($650^{\circ}C$, $Li_2CO_3/K_2CO_3=62/38$ mol%, $H_2/CO_2=80/20$ vol%) without or with different $CaCO_3$ content. Not only immersion test method but also morphological observation of samples in the carbonate melts are adopted as experimental methods. With aid of the morphological observation of cross section of samples immersed in a carbonate melt was possible to obtain penetration attack. The concentration effect of $CaCO_3$ inhibitor was investigated in order to verify the optimum concentration for practical application in MCFC stack operation. The corrosion rate in the presence of $CaCO_3$ was proven to be decreased as a function of $CaCO_3$ concentration. The corrosion rate in the presence of $CaCO_3$ was measured with a value of 6.9 mpy which is 2.4 times lower than that of inhibitor-free electrolyte. The cross section microscopy revealed that the internal penetration by oxidation in molten carbonate is very severe. In this case, the attack was occurred not only dissolution loss in the electrolyte by corrosion reaction but also weight gain through oxide layer by internal penetration.

• 토지주택연구
• /
• 제15권1호
• /
• pp.147-156
• /
• 2024

본 연구는 시멘트 클링커 제조에 사용되는 탄산염 광물인 석회석(CaCO₃)을 CO₂가 결합되어 있지 않은 탈탄산 원료를 사용하여 제조 공정 중에 발생하는 CO₂를 저감하고자 하는 연구로 다양한 산업부산물 중 폐콘크리트에 부착되어 있는 시멘트페이스트를 이용하고자 하였다. 일반적으로 시멘트용 석회석은 최소한 CaCO₃의 함유량이 80% 이상(CaO, 44% 이상)의 것을 사용해야만 시멘트 클링커의 품질을 확보할 수 있다. 하지만 폐콘크리트 미분말의 CaO 함량은 평균 20% 정도로 시멘트 클링커 원료로 사용하기 위하여 CaO 함량을 35% 이상으로 조성비를 올려줘야 이용이 가능하다. 따라서 폐콘크리트 미분말의 조성 광물 경도차이를 이용하여 경도가 상대적으로 낮은 CaO 형태의 광물을 선택적으로 분쇄하여 분급 및 체가름을 할 경우 CaO 함량을 35% 이상 상승시킬 수 있다. 이에 본 연구에서는 분쇄 공정을 통해 경도가 상대적으로 낮은 CaO를 함유한 광물들을 선택적으로 분쇄하여 효율적으로 CaO와 SiO₂ 외 기타 성분을 분리하는 최적 조건에 대하여 실험적 및 통계적으로 검토·분석하였다. 시멘트 크링커 원료로서 탈탄산된 35% 이상 CaO를 함유한 폐콘크리트 미분말 제조를 위한 최적 분쇄 조건 실험 결과, 분쇄 시간 5분 이내, 피분쇄물 종류 30mm, 피분쇄물양 1.0 이상이 최적 조건인 것을 알 수 있었지만 단일 입도의 분쇄물이 아닌 혼합입도의 분쇄물에 대한 검토가 필요할 것으로 판단된다.

• Advances in materials Research
• /
• 제5권2호
• /
• pp.121-130
• /
• 2016

In an attempt to reach a balance of performances in homo-polypropylene based system, the effects of single and hybrid reinforcements inclusions comprising calcium carbonate nanoparticles (2, 4 and 6 phc) and glass fibers (10 wt.%) on the mechanical and thermal properties were investigated. Different samples were prepared by employing twin-screw extruder and injection molding machine. In morphological studies, the uniform distribution of glass fibers in PP matrix, relative adhesion between glass fibers and polymer, and existence of nanoparticles in polymer matrix were observed. $PP/CaCO_3$ (6 phc) as compared to pure PP and PP/GF had superior tensile and flexural strengths, impact resistance and deformation temperature under load (DTUL). $PP/GF/CaCO_3$ (6 phc) composite displayed comparable tensile and flexural strengths and impact resistance to neat PP, while its tensile and flexural moduli and deformation temperature under load (DTUL) were 436%, 99% and $26^{\circ}C$greater respectively. The maximum impact resistance was observed in $PP/CaCO_3$(6 phc). The highest DTUL was perceived in PP hybrid nanocomposite containing 10 wt.% glass fiber and 4 phc $CaCO_3$ nanoparticle.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.727-733
• /
• 2009

슬러리 기포탑에서 침강성 탄산칼슘의 평균입도와 모폴로지의 변화에 대한 수산화칼슘의 농도(0.16~0.64 wt%), 총 부피유량(3~6 L/min) 및 이산화탄소의 부피분율(0.3~0.6)의 영향을 나타내었다. 실험에 사용한 반응기는 높이가 1.0 m, 직경이 0.11 m이고 중앙에는 직경 4 cm인 튜브가 들어있는 슬러리 기포탑이다. 반응 시간에 따른 수산화칼슘의 전화율을 구하기 위해 FT-IR을 이용하여 수산화칼슘과 탄산칼슘 함량비에 따른 검량곡선을 구하였다. 수산칼슘의 포화농도인 0.16 wt%에서 이산화탄소의 유량에 따른 침강성 탄산칼슘의 모폴로지를 살펴보면 반응 속도가 증가할수록 결정 크기는 증가하는 경향을 보이며 결정의 형태는 단일 결정으로 존재하는 입자들이 많아졌다. 또한 수산화칼슘의 농도가 증가할수록 결정 크기는 감소하지만 입자들간의 응집에 의해 탄산칼슘의 평균 입도는 증가하는 것을 확인하였다.

• 폴리머
• /
• 제32권2호
• /
• pp.178-182
• /
• 2008

생분해가 가능한 셀룰로오스 디아세테이트(CDA)/탄산칼슘($CaCO_3$) 복합체를 용융가공을 통하여 제조하였고, 그 특성을 연구하였다. 용융가공을 위하여, 혼합체에 가소제로 트리아세틴(TA)과 윤활제로서 소량의 에폭시화된 콩기름(epoxidized soybean oil)을 첨가하였으며 가공시 최적 조건을 확립하였다. CDA와 TA의 아세틸기($-OC(O)CH_3$)가 용융가공 중에 열분해 되어 초산($CH_3COOH$)을 발생시키는데, 탄산칼슘의 함량(wt%)이 증가할수록 초산($CH_3COOH$)의 흡수효과(absorption effects)가 향상되며, 탄성률과 $T_g$가 증가하였다. 탄산칼슘의 함량이 증가할수록 인장강도와 신율은 감소하였다.