• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.106-113
• /
• 2015

Effects of mineral salts (N, P, K, $Ca^{2+}$, $Mg^{2+}$, and $Fe^{3+}$) on the shoot growth and metabolite production of tea tree were studied using in vitro culture techniques. Among mineral s alts, ${H_2PO_4}^-$ was the most important for enhanced growth rate of tea tree, while $Mg^{2+}$ and $Ca^{2+}$ did not affect plant growth. Removal of ${NH_4}^+$ and $NO_3$ from the culture medium enhanced shoot multiplication compared to other treatments. Metabolite production was variable depending on mineral types and concentration. Removal of $Ca^{2+}$ decreased the production of caffeine; however, other treatments did not influence its production. $Ca^{2+}$, ${NH_4}^+$ and $Fe^{3+}$ were important factors for catechin production in tea tree. These results can be used as the basis for development of technical soil controls suitable for tea tree cultivation in the future.

• Journal of Korean Society for Atmospheric Environment
• /
• v.4 no.2
• /
• pp.57-66
• /
• 1988

Sandy dust phenomena was observed from April 19 to 23, 1988 in Seoul and suspended particulate was collected by Andersen air sampler during this period. The samples were analyzed for 16 components $(SO_n^{2-}, NO_3^-, Cl^-, PO_4^{3-}, NH_4^+, F^-, Al, Fe, K, Cu, Mn, Na, Pb, Mg, Ca, Cd)$. The conclusions are as follwes: 1. Total suspended particulate concentation during the period of sandy dust phenomena was 489 $\mug/m^3$ (ordinary times: 140-125 $mug/m^3$) 2. The water - soluble ion component concentration of suspended particulate during the period of sandy dust phenomena was few and the metal concentration of that was more than that of ordinary times. 3. The cumulative frequency distribution of suspended particulates in logarithmic diagram did not show similar to normal log distribution during the period of sandy dust phenomena. 4. $SO_4^{2-}, NO_3^-, Cl^-, and PO_4^{3-}$ was onsided to coarse particle, and $NH_4^+$ and F to fine particle in the size distribution of water - soluble ion components during the period of sandy dust phenomena. 5. Metal concentration was high and Al, Fe, Cu, Mn, Na, Mg, and Ca was onsided to coarse particle, and K, Pb, and Cd to fine particle in the size distribution of metal components. 6. During the period of sandy dust phenomena the quantity of respirable particle (< 1 $\mum$) was about 3 times and that of metal components were about 2 - 11 times than that of ordinary times. 7. The concentrations of $NO_3^-, Cl^-, NH_4^+$ at ordinary times were 1.1 - 4 time than that of the period of sandy dust phenomena.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.405-411
• /
• 2007

This study was carried out to measure insoluble phosphorus fractions content fixed in different soil type and isolate a superior phosphate solublizing bacteria(PSB) producing free phosphate in citrus orchard soil. Distribution of insoluble phosphate fraction ordered Al-P>Ca-P>Fe-P in the investigated citrus orchards. Insoluble phosphate fraction such as Al-P, Ca-P, Fe-P were higher in volcanic ash than in non-volcanic ash soil. A PSB with high holo zone in PDA-P medium isolated from citrus orchard soil. This strain identificated by MIDI system as Bacillus sphaericus. The optimum growth of pH and temperature were at 4~5, $30^{\circ}C$, respectively. When Bacillus sphaericus cultured at $25^{\circ}C$, 150 rpm condition in LB broth medium included different phosphate. Bacillus sphaericus produced free phosphate in the culture broth medium from tricalcium-phosphate(207.0 ppm), aluminium phosphate(324.5 ppm) and hydroxyapatite(334.8 ppm) and Phosphatase activity of Bacillus sphaericus was higher at $35^{\circ}C$ culture condition than that of $25^{\circ}C$. Two type preparation inoculated Bacillus sphaericus made with carrier materials such as Bentonite, $CaCO_3$, Sodium alginate. Density of PSB in this preparation conserved at $10^5c.f.u.\;g^{-1}$ level during storage in different temperature condition for 7 month. It also showed that free phosphate produced at PDA-P medium.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.108-108
• /
• 2015

In order to investigate on hydroxyapatite precipitation phenomena on nanotubular Ti-29Nb-xHf ternary alloys, Ti-29Nb-xHf alloys contained (0% to 15%) Hf were manufactured using arc melting furnace. Formation of nanotubular structure was achieved by an electrochemical method in 1M $H_3PO_4$ electrolytes containing 0.8%wt. % NaF. Electrochemical deposition was carried out using cyclic and voltammetry(CV) method at $85^{\circ}C$ in $5mM\;Ca(NO_3)_2+3mM\;NH_4H_2PO_4$. HA coating on nanotube formed Ti-29Nb-xHf ternary alloys showed a good wettability.

• Microbiology and Biotechnology Letters
• /
• v.34 no.4
• /
• pp.323-328
• /
• 2006

A bacterium producing the extracellular protease was isolated from insect-eating plant and has been identified as a member of the genus Bacillus based on partial 165 rRNA sequences. In order to develop the medium composition, effects of ingredients including nitrogen sources, carbon source, metal ions and phosphate were examined for protease production of the isolate, SH-8. Soluble starch increased the protease productivity, while glucose repressed it. Yeast extract was effective nitrogen source for enzyme production, but the pretense production of Bacillus sp. SH-8 was reduced by large amount of yeast extract. The calcium was found to induce pretense activity as well as protease productivity. However, cell growth and enzyme production was completely inhibited by divalent ions such as $Zn^{2+}$, $Cu^{2+}$, $Co^{2+}$ and $Mn^{2+}$. The maximum protease productivity was reached 435 unit/ml in the optimized medium consisting of soluble starch (2%), yeast extract (0.3%), $CaCl_2$ (0.3%), $K_2HPO_4$ (0.01%) and $KH_2PO_4$ (0.01%). The pretense activity of culture filtrate was dramatically decreased after incubation for 26 h.

• Journal of Powder Materials
• /
• v.30 no.5
• /
• pp.394-401
• /
• 2023

Li_1.5Al_0.5Ti_1.5(PO₄)₃ (LATP) is considered to be one of the promising solid-state electrolytes owing to its excellent chemical and thermal stability, wide potential range (~5.0 V), and high ionic conductivity (~10^-4 S/cm). LATP powders are typically prepared via the sol-gel method by adding and mixing nitrate or alkoxide precursors with chelating agents. Here, the thermal properties, crystallinity, density, particle size, and distribution of LATP powders based on chelating agents (citric acid, acetylacetone, EDTA) are compared to find the optimal conditions for densely sintered LATP with high purity. In addition, the three types of LATP powders are utilized to prepare sintered solid electrolytes and observe the microstructure changes during the sintering process. The pyrolysis onset temperature and crystallization temperature of the powder samples are in the order AC-LATP > CA-LATP > ED-LATP, and the LATP powder utilizing citric acid exhibits the highest purity, as no secondary phase other than LiTi₂PO₄ phase is observed. LATP with citric acid and acetylacetone has a value close to the theoretical density (2.8 g/cm³) after sintering. In comparison, LATP with EDTA has a low sintered density (2.2 g/cm³) because of the generation of many pores after sintering.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.2
• /
• pp.252-258
• /
• 1998

The strain producing biosurfactant was isolated from soil smples. The isolated strain was identified as the genus Nocardia through its morphological, cultural and physiolgical characteristics. A high concentration of the biosurfactant by Nocardia sp. L-417 was obtained after 4 days of cultivation in the culture medium containing 3% n-hexadecane, 0.1% $NaNO_3$, 0.02% $K_2HOP_4$, 0.01% $H_2PO_4$, 0.01% $MgSO_4$.$7H_2O$, 0.01% $CaCl_2$, 0.02% yeast extract, and 0.02% tryptone. The optimum pH and temperature for biosurfactant production were pH 6.0 and $30^{\circ}C$, respectively. Furthermore, most biosurfactans were produced during the exponential growth phase, and this fact indicated that the biosurfactans production was growth-associated. The biosurfactant showed the good emulsification activities on various emulsifying substrates such as bunker A, paraffin, corn oil which are used widely in industries.

• KSBB Journal
• /
• v.17 no.6
• /
• pp.586-589
• /
• 2002

Lipomyces starkeyi KSM 22 produces dextranase and amylase (DXAMase). The addition of 0.02％ (w/v) 2-deoxy-D-glucose or 0.5% (w/v) glycerol into a 1% (w/v) starch medium increased the final activity of DXAMase produced 2.5 fold or 2.4 fold, respectively, compared to that of a 1% (w/v) starch medium. This activity was similar to that produced with 1% (w/v) dextran. The stability of purified OXAMase at 40$\^{C}$ for 3 weeks was tested using the various enzyme stabilizers. With the addition of 25% (v/v) glycerol, 90.9% of initial activity was left after 3 weeks. For practical use, the addition of 1% (v/v) glycerol with 50 mM of CaCl$_2$ or KH$_2$PO$_4$was adequate and maintained 73.4% of the initial activity under the test conditions used.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.3
• /
• pp.336-340
• /
• 1996

Rhizopus japonicus had the highest chitosan productivity compared with the chitosan productivity among Rhizopus sp. strains. To increase the productivity of microbial chitosan from Rhizopus faponicus, production medium and incubation conditions were optimized. The composition of the medium and the incubation conditions were as follows : starch 2%, yeast extract 2.5%, KH2PO4 0.05%, MgSO4 0.01%, FeSO4 0.002%, MnSO4 0.002%, ZnSO4 0.002%, CaC12 0.002%, PH 5.5, incubation temperature medium compared with chitosan productivity.

• Journal of the Korean Ceramic Society
• /
• v.30 no.4
• /
• pp.289-298
• /
• 1993

Properties in terms of the variation of the glass compositions, which were density (p), molar volume(Vm), atom/ion packing density (Dp), refractive index (nD), transformation temperature (Tg), dilatometric softening point (Td), thermal expansion coefficient (α), Young's modulus (E), and knoop hardness (KHN) were investigated in CaO-SiO2 glasses and CaO-P2O5-SiO2 glasses containing less than 10mole% of P2O5. Those properties were measured by density measurement kit, Abbe refractometer, dilatometer, ultrasonic pulse echo equipment, and micro hardness tester. When CaO content was increased in CaO-SiO2 glasses, p, Dp, nD, Tg, Td, α, E and KHN were increased, while Vm was decreased. When P2O5 was added to the CaO-SiO2 glasses with constant CaO/SiO2 ratio as 1.07, p, Dp, nD, Tg, Td, α, E and KHN were decreased, while Vm was increased. When the amount of P2O5 in glasses was kept constant, the changes of the properties with variation of CaO content in the CaO-P2O5-SiO2 glasses were very similar to those of CaO-SiO2 glasses. These phenomena could be explained by the structural role of P2O5 in the CaO-P2O5-SiO2 glasses, which was polymerization of siicate structures and resulted in [PO4] monomer structure in glasses. Due to this structural characteristics, the bond strength and packing density were changed with compositions. Proportional relationships between 1) np and Dp, 2) Tg, Td, α and CaO content, 3) E and Vm-1, and 4) KHN and P2O5 content were evaluated in this investigation.