• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.618-628
• /
• 1998

Pure CaO, Mn-doped CaO, Mn/CaO, and K/CaO catalysts were prepared and tested as catalysts for the oxidative coupling of methane in the temperature range of 600 to 800$^{\circ}C$ to investigate the effects of Mn- and K-addition on the catalytic activity of calcium oxide. To characterize the catalysts, X-ray powder diffraction(XRD), XPS, SEM, DSC, and TG analyses were performed. The catalytic reaction was carried out in a single-pass flow reactor using on-line gas chromatography system. Normalized reaction conditions were generally $p(CH_4)/p(O_2)=250$ Torr/50 Torr, total feed flow rate=30 mL/min, and 1 atm of total pressure with He being used as diluent gas. Among the catalysts tested, 6.3 mol% Mn-doped CaO catalyst showed the best $C_2$ yield of 8.0% with a selectivity of 43.2% at 775$^{\circ}C$. The $C_2$ selectivity increased on lightly doped CaO catalysts, while decreased on heavily doped CaO([Mn] > 6.3 mol%) catalysts. 6 wt.% Mn/CaO and 6 wt.% K/CaO catalysts showed the $C_2$ selectivities of 13.2% and 30.9%, respectively, for the reaction. Electrical conductivities of CaO and Mn-doped CaO were measured in the temperature range of 500 to 1000$^{\circ}C$ at Po2's of $10^{-3}\; to\;10^{-1}\;atm.$ The electrical conductivity was decreased with Mn-doping and increased with increasing $P0_2$in the range of $10^{-3}\;to\;10^{-1}\;atm,$ indicating the specimens to be p-type semiconductors. It was suggested that the interstitial oxygen ions formed near the surface can activate methane and the formation of interstitial oxygen ions was discussed on the basis of solid-state chemistry.

• Archives of Pharmacal Research
• /
• v.19 no.4
• /
• pp.280-285
• /
• 1996

The sustained release dosage form which delivers melatonin (MT) in a circadian fashion over 8 h is of clinical value for those who have disordered circadian rhythms because of its short halflife. The purpose of this study was to evaluate the gelling properties and release characteristics of alginate beads varying multivalent cationic species $(Al^{+++}, \; Ba^{++}, \; Ca^{++}, \; Mg^{++}, \; Fe^{+++}, \; Zn^{++})$. The surface morphologies of Ca- and Ba-alginate beads were also studied using scanning electron microscope (SEM). MT, an indole amide pineal hormone was used as a model drug. The $Ca^{++}, \; Ba^{++}, \; Zn^{++}, \; Al^{++}\; and\; Fe^{+++}\; ions\; except\; Mg^{++}$ induced gelling of sodium alginate. The strength of multivalent cationic alginate beads was as follows: $Al^{+++}\llFe^{+++} the induced hydrogel beads were very fragile and less spherical. Fe-alginate beads were also fragile but stronger compared to Al-alginate beads. Ba-alginate beads had a similar gelling strength but was less spherical when compared to Ca-alginate beads. Zn-alginate beads were weaker than Ca- and Ba-alginate beads. Very crude and rough crystals of Ba- and Ca-alginate beads at higher magnifications were observed. However, the type and shape of rough crystals of Ba- and Ca-alginate beads were quite different. No significant differences in release profiles from MT-loaded multivalent cationic alginate beads were observed in the gastric fluid. Most drugs were continuously released upto 80% for 5 h, mainly governed by the passive diffusion without swelling and disintegrating the alginate beads. In the intestinal fluid, there was a significant difference iq the release profiles of MT-loaded multivalent cationic alginate beads. The release rate of Ca-alginate beads was faster when compared to other multivalent cationic alginate beads and was completed for 3 h. Ba-alginate beads had a very long lag time (7 h) and then rapidly released thereafter. MT was continuously released from Feand Zn-alginate beads with initial burstout release. It is assumed that the different release rofiles of multivalent cationic alginate beads resulted from forces of swelling and disintegration of alginate beads in addition to passive diffusion, depending on types of multivalent ions, gelling strength and drug solubility. It was estimated that 0.2M $CaCl_2$ concentration was optimal in terms of trapping efficiency of MT and gelling strength of Ca-alginate beads. In the gastric fluid, Ca-alginate beads gelled at 0.2 M $CaCl_2$ concentration had higher bead strength, resulting in the most retarded release when compared to other concentrations. In the intestinal fluid, the decreased release of Ca-alginate beads prepared at 0.2 M $CaCl_2$ concentration was also observed. However, release profiles of Ca-alginate beads were quite similar regardless of $CaCl_2$ concentration. Either too low or high $CaCl_2$ concentrations may not be useful for gelling and curing of alginate beads. Optimal $CaCl_2$ concentrations must be decided in terms of trapping efficiency and release and profiles of drug followed by curing time and gelling strength of alginate beads.

• The Korean Journal of Physiology and Pharmacology
• /
• v.14 no.1
• /
• pp.21-28
• /
• 2010

Phenolic compounds affect intracellular free $Ca^{2+}$ concentration ($[Ca^{2+}]_i$) signaling. The study examined whether the simple phenolic compound octyl gallate affects ATP-induced $Ca^{2+}$ signaling in PC12 cells using fura-2-based digital $Ca^{2+}$ imaging and whole-cell patch clamping. Treatment with ATP ($100\;{\mu}M$) for 90 s induced increases in $[Ca^{2+}]_i$ in PC12 cells. Pretreatment with octyl gallate (100 nM to $20\;{\mu}M$) for 10 min inhibited the ATP-induced $[Ca^{2+}]_i$ response in a concentration-dependent manner ($IC_{50}=2.84\;{\mu}M$). Treatment with octyl gallate ($3\;{\mu}M$) for 10 min significantly inhibited the ATP-induced response following the removal of extracellular $Ca^{2+}$ with nominally $Ca^{2+}$-free HEPES HBSS or depletion of intracellular $Ca^{2+}$ stores with thapsigargin ($1\;{\mu}M$). Treatment for 10 min with the L-type $Ca^{2+}$ channel antagonist nimodipine ($1\;{\mu}M$) significantly inhibited the ATP-induced $[Ca^{2+}]_i$ increase, and treatment with octyl gallate further inhibited the ATP-induced response. Treatment with octyl gallate significantly inhibited the $[Ca^{2+}]_i$ increase induced by 50 mM KCI. Pretreatment with protein kinase C inhibitors staurosporin (100 nM) and GF109203X (300 nM), or the tyrosine kinase inhibitor genistein ($50\;{\mu}M$) did not significantly affect the inhibitory effects of octyl gallate on the ATP-induced response. Treatment with octyl gallate markedly inhibited the ATP-induced currents. Therefore, we conclude that octyl gallate inhibits ATP-induced $[Ca^{2+}]_i$ increase in PC12 cells by inhibiting both non-selective P2X receptor-mediated influx of $Ca^{2+}$ from extracellular space and P2Y receptor-induced release of $Ca^{2+}$ from intracellular stores in protein kinase-independent manner. In addition, octyl gallate inhibits the ATP-induced $Ca^{2+}$ responses by inhibiting the secondary activation of voltage-gated $Ca^{2+}$ channels.

• Journal of Mushroom
• /
• v.2 no.2
• /
• pp.69-75
• /
• 2004

This study was carried out to investigate effect of $CaCO_3$ treatment on cultivation of oyster mushroom for suppression of green mold disease and for promotion of mycelial growth to stabilize mushroom production in field and laboratory experiment. Treatment of $CaCO_3$ in PDA media promoted mycelial growth of mushroom and suppressed that of green mold. Addition of $CaCO_3$ in rice straw substrate increased mushroom mycelial growth compared with control. In that case, growth of green mold increased up to treated 0.6% $CaCO_3$ but decreased in treatment beyond 0.8% $CaCO_3$. There were some differences on effect of $CaCO_3$ treatment according to green mold species. Trichoderma longibrachiatum was effected but T. virens was not effected by treated $CaCO_3$. Differences among mushroom strains by treated $CaCO_3$ were not shown. It is confirmed that treatment of $CaCO_3$ can promote mushroom mycelial growth but it's not clear in the field. In the result of field test, treatment of $CaCO_3$ in rice straw substrates tended to increase yield and decrease incidence of disease compared with non-treatment. These results suggest that $CaCO_3$ treatment on cultivation of oyster mushroom can be applied to take preventive steps against of green mold disease.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.5
• /
• pp.598-605
• /
• 2005

Effects of chitosan-ascorbate(CA) and calcium lactate(CL) on fermentation and quality of squid sikhae were investigated CA and LA were added at $0.5\%$ (designated CA1 and CL1) and $1.0\%$(CA2 and CL2) concentrations, respectively and fermented for 12 days at $10^{\circ}C$. pH of CA-added sikhae was higher than that of control, while acidity of the former was lower than that of the latter. During 12 days of fermentation, CA-added sikhae showed higher protease activity than control by $2.3\~2.6$ times and CL-added sikhae by $2.8\~3.6$ times. At 12 days of fermentation, CA-added sikhae revealed higher protease activity than control by $1.2\~1.4$ times and CL-added sikhae by $1.5\~1.9$ times. CA-added sikhae also showed higher amino-nitrogen content than control by $1.4\~1.7$ times and CL-added sikhae by $1.9\~3.5$ times. In comparison of CA1 with CA2, CA2 showed all higher pH, protease and amylase activity, and amino-nitrogen content than CA1. In analysis of electrophoresis, molecular weights of major proteins in ~w squid were $116.9\~119.0$, 96.5 and 59.3kDa. However, after fermentation for 12 days, a protein band of 119.0kDa disappeared but a new protein band with below 14 kDa appeared in sikhae, especially CA-added sikhae. In sensory evaluation, the intensity of sour taste was the highest for control and the lowest for CA2. Softness of squid was the highest for control and the lowest for CA2. Overall acceptability was the best for CA2. In conclusion, these results suggest use of $1\%$ CA in sikhae preparation as addition of CA(CA2) increased the protease and amylase activity, nitrogen content of amino form, sensory acceptability as well as shelf-life of sikhae.

• Microbiology and Biotechnology Letters
• /
• v.7 no.3
• /
• pp.157-164
• /
• 1979

These experiments were performed to investigate the culture condition, characteristic of crude enzyme and the heat resistance of the acid protease by Aspergillus awamori U-3. The results obtained were as follows: 1. The optimum culture temperature and time on wheat bran medium and defatted rice bran medium were 3$0^{\circ}C$ and 72 hrs, respectively. The optimum amount of added water was 100~120 ％ on wheat bran medium and 100~130 ％ on de-fatted rice bran medium. 2. Of the these various ingredients, addition of KN $O_3$, glutamic acid and glucose on wheat bran medium and addition Of KN $O_3$, (N $H_4$)$_2$S $O_4$, glucose, lactose, K $H_2$P $O_4$ and MgC $l_2$ on defatted rice bran medium were very effective. On wheat bran medium, concentration of addition of glucose, KN $O_3$ and glutamic acid were 3.0~4.0％, 0.2~0.4 ％ and 1.0％, respectively. 3. The optimum pH for the enzyme action was 2.4 ％, the optimum temperature about 45$^{\circ}C$ and the stable pH range 2.0~5.0, The enzyme was stable below 5$0^{\circ}C$ and was inactivated rapidly above 5$0^{\circ}C$. 4. The addition of CaC $l_2$ and CaS $O_4$ as the heat resistance agents showed the slight resistance. 5. When the enzyme solution added with the heat resistance agents (CaC1$_{2}$ and CaS $O_2$) was heated for 10-30 minutes at 6$0^{\circ}C$, their remaining activities were decreased largely above 20 minutes and The heat resistance effects of CaC $l_2$ and CaS $O_4$ were not observed almost at 8$0^{\circ}C$.

• Journal of Powder Materials
• /
• v.17 no.4
• /
• pp.289-294
• /
• 2010

For the aim of low-temperature co-fired ceramic microwave components, sintering behavior and microwave properties (dielectric constant ${\varepsilon}_r$, quality factor Q, and temperature coefficient of resonant frequency ${\tau}_f$) are investigated in $Bi_{18}O(Ca_{0.725}Zn_{0.275})_8Nb_{12}O_{65}$ [BCZN] ceramics with addition of $V_2O_5$. The specimens are prepared by conventional ceramic processing technique. As the main result, it is demonstrated that the additives ($V_2O_5$) show the effect of lowering of sintering temperature and improvement of microwave properties at the optimum additive content. The addition of 0.25 wt% $V_2O_5$ lowers the sintering temperature to $890^{\circ}C$ utilizing liquidphase sintering and show the microwave dielectric properties (dielectric constant ${\varepsilon}_r$ = 75, quality factor $Q{\times}f$ = 572 GHz, temperature coefficient of resonance frequency ${\tau}_f\;=\;-10\;ppm/^{\circ}C$). The estimated microwave dielectric properties with $V_2O_5$ addition (increase of ${\varepsilon}_r$, decrease of $Q{\times}f$, shift of ${\tau}_f$ to negative values) can be explained by the observed microstrucure (sintered density, abnormal grain structure) and possibly high-permittivity $Bi_{18}Zn_8Nb_{12}O_{65}$ (BZN) phase determined by X-ray diffraction.

• Korean Journal of Materials Research
• /
• v.25 no.1
• /
• pp.32-36
• /
• 2015

Hot rolling of Mg-6Zn-0.6Zr-0.4Ag-0.2Ca-(0, 8 wt%)Li powder was conducted at the temperature of $300^{\circ}C$ by putting the powder into the Cu pipe. The microstructure and mechanical properties of the samples were observed. Mg-6Zn-0.6Zr-0.4Ag-0.2Ca without Li element was consisted of ${\alpha}$ phase and precipitates. The microstructure of the 8 wt%Li containing alloy consisted of two phases (${\alpha}$-Mg phase and ${\beta}$-Li phase). In addition, $Mg_2Zn_3Li$ was formed in 8%Li added Mg-6Zn-0.6Zr-0.4Ag-0.2Ca alloy. By addition of the Li element, the non-basal planes were expanded to the rolling direction, which was different from the based Mg alloy without Li. The tensile strength was gradually decreased from 357.1 MPa to 264 MPa with increasing Li addition from 0% to 8%Li. However, the elongation of the alloys was remarkably increased from 10 % to 21% by addition of the Li element to 8%. It is clearly considered that the non-basal texture and ${\beta}$ phase contribute to the increase of elongation and formability.

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.684-691
• /
• 1996

To enhance the formation of Bi,Sr,Ca,Cu,O,(Bi-2223) single phase in a shorter reaction time, the intermediate compounds such as Bi,Sr,CuO,(Bi-2201). BizSr,CaCuz08(Bi-2212) and (Ca, Sr,, ,9)CuOz in the Bi-Sr-Ca-Cu-0 system were used as the precursors. The formation of Bi-2223 was enhanced in the mixture of Bi-2201 and (Ca, ,,Sr, 119)C~eOsZpe,c ially from the mixture with (Ca, 9I Sr, ,,)CuO,-rich composition compared to Bi, iPb, 4Sr2Ca,Cu3010-cxo mposition. The formation of Bi- 2223 essentially completed within 60h at 860$^{\circ}$C and 870$^{\circ}$C. However, a small amount of the remnant Bi-2212 phase did not disappear even after a prolonged reaction at 870'C. The merit of the proposed synthetic method using the intermediate precusors can be summarized as a shorter reaction time for the formation of Bi-2223 phase, in addition to a smaller amount of second phases compared to the conventional solid-state reaction method.

• Journal of the Korean Magnetics Society
• /
• v.13 no.3
• /
• pp.121-126
• /
• 2003

The electromagnetic properties and microstructures of the basic composition of (N $i_{0.2}$C $u_{0.2}$Z $n_{0.6}$)$_{1.085}$(F $e_2$ $O_3$)$_{0.915}$ were invested by changing of the additive Sn $O_2$, CaO amounts and ferrite processes. There is no variation of grain size by changing additive amount. It can reduce the total loss when (N $i_{0.2}$C $u_{0.2}$Z $n_{0.6}$)$_{1.085}$(F $e_2$ $O_3$)$_{0.915}$ composition sintered at 1150 $^{\circ}C$ better than 130$0^{\circ}C$. Additive CaO confirmed of useful addition for the reduce total loss, because it increasing sintering density. Decreasing total loss were observed by adding both Sn $O_2$ 0.06 wt％ and CaO 0.4 wt％.