• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.6
• /
• pp.465-476
• /
• 2021

Scale and rust generation in water pipes is a common phenomenon when cast iron water pipes have been used for a long time. A physical water treatment device is known among various means for suppressing rust in a water pipe, and a zinc ionization device for putting zinc metal into a pipe and emitting the zinc cation into water is one of such devices. This research measured the amount of zinc ion generated, which is known to exhibit an effect of inhibiting rust and scale generation in a pipe, and examined the scale and rust inhibition effect of the ionization device installed for ground or building water supply. In the case of distilled water, the concentration of zinc ion increased by circulating water in the ionization device several times, and it was verified to be hundreds of ㎍/L, and in the case of discharging ground or tap water, it was verified to be tens of ㎍/L. In addition, a verification pipe was installed to confirm the change inside the pipe before and after installation of the zinc ionization device, and the internal condition of the pipe was observed 3 months to several years after installation. It was confirmed that the corrosion area of the surface of the pipe was no longer increased by installing a corrosion inhibitor, and if the pipe was already filled with corrosion products, the amount of corrosion products gradually decreased every year after installation. The phenomenon of fewer corrosion products could be interpreted as expanding the space in the pipe due to the corrosion product as Fe₂O₃ adhered to the inner surface of the pipe and turned into a smaller black Fe₃O₄. In addition, we found that scale such as CaCO₃ together in the corrosion by-products gradually decreased with the attachment of the ionization device.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.6
• /
• pp.103-114
• /
• 2007

Sands distributed in Jeju island's coastal areas, Korea, can be classified as silicate sand derived from volcanic rock, carbonate sand derived from shells, and mixed sands containing both silicate and carbonate sands. These three types of sands typically exist in Jeju coastal areas. Samples of silicate, carbonate and mixed sands were obtained from Samyang beach, Gimnyeong beach, and Jeju harbor area, respectively. Compression tests were conducted to assess the compression characteristics of these sands. As a result of these tests, each sand showed different behaviors. For Samyang beach sand, it appeared that initial compression is a larger than the other two sands. For Cimnyeong and Jeju harbor sands, however, the additional compression occurred after initial compression. This could result from the crushing, shattering, and rearrangement of sand particles. In addition, settlement behavior of Jeju harbor ground according to the construction stages was analyzed using the measured data. It showed that in addition to the initial elastic compression, a considerable additional compression occurred with time. The settlements of Jeju harbor ground were predicted by using the elastic settlement calculation methods (empirical methods) and the compression test method. The empirical methods, which did not consider the crushing, shattering, and rearrangement of particles could show smaller result than that occurring actually.

• Applied Biological Chemistry
• /
• v.14 no.1
• /
• pp.59-97
• /
• 1971

As a study on the cellulase of Myriococcum albomyces the culture media for enzyme formation and properties of its crude preparation were investigated and the crude enzyme preparation was further fractionated. The results are summarized as follows: 1. Wheat bran solid culture produced stronger activities of cellulase than rice bran or defatted soy bean meal solid culture. 2. Shaking culture with wheat bran, rice bran or defatted soy bean meal produced higher cellulase activities than solid culture with the corresponding media. 3. The enzyme formation was higher at $45^{\circ}C$ than at $37^{\circ}C$ or $50^{\circ}C$ regardless of the kind of culture medium. 4. The formation of CMCase activity was more promoted by organic nitrogen source than inorganic nitrogen source. 5. The formation of cellulase activities were increased 1.5 to 3.0-fold by adding CMC, Avicel or cellulose powder as an inducer into 5% wheat bran basal medium. 6. Cellulase production using a tank culture procedure with addition of CMC or Avicel as an inducer was the highest at fifth day and thereafter decreased slightly. 7. The crude enzyme preparation showed pH optimum in 4.0 to 4.5, and pH stability in the range of 3.5 to 8.0. Optimum temperature for the activity was $65^{\circ}C$ which was higher than among other cellulases and it was stable at $60^{\circ}C$ for 120 minutes. 8. Dialyzed crude enzyme was activated by $Ca^{++}$ and $Mg^{++}$, but inhibited by $Hg^{++}$, $Cu^{++}$ and $Ag^{+}$. 9. Four different types of cellulase, i. e., fraction I, fraction II-a, fraction II-b, and fraction III were purified from the culture filtrate of Myriococcum albomyces through a sequence of ammonium sulfate fractionation, and elution chromatography on DEAE-Sephadex A-25, Amberlite CG-25 type 2 and hydroxyapatite columns. 10. These four cellulase fractions were showed to be homogenous by electrophoresis and ultracentrifugation and also gave a typical ultraviolet absorption spectrum of protein. 11. Four purified fraction showed different specificity toward substrates, fraction I has a stronger activity toward Avicel, cellulose powder, and gauze than that of other cellulase fractions. Fraction II-a had a powerful activity toward cellobiose but it was almost inactive agaisnt fibrous cellulose contrary to fraction I. On the contrary, the main component fraction II-b had a fairly higher activity on CMC and Avicel. Activity of fraction II-b toward cellobiose was about one-third of that of fraction II-a and activity on Avicel was lower than that of fraction I. Fraction III had a more powerful activity in decreasing viscosity of CMC. 12. Final hydrolysis products of fibrous cellulose by each fraction were cellobiose and glucose. Whereas oligosaccharides were predominant in the early stage of hydrolysis, prolonged reaction produced more glucose than cellobiose. Fraction I and fraction II-a acted synergically on Avicel. 13. Optimum pH for the activities of cellulase fraction I, fraction II-a, fraction II-b and fraction III were found to be 5.5, 5.0, 4.0 and $4.0{\sim}4.5$, respectively. These fractions were found to be stable in the range of pH $3.0{\sim}7.5$. 14. Optimum temperature for the activities of fraction I, fraction II-a, fraction II-b, and fraction III were $50^{\circ}C$, $55^{\circ}C$, $60^{\circ}C$ and $55^{\circ}C$, respectively. No less of activity was found by heating 120 minutes at $55^{\circ}C$ and fraction II-a was more stable than the others at $60^{\circ}C$. 15. Fraction I and fraction II-b were activated by $Ca^{++}$ and $Mg^{++}$ but inhibited by $Hg^{++}$ and $Ag^{+}$.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.

• Journal of Wetlands Research
• /
• v.25 no.1
• /
• pp.35-47
• /
• 2023

Korean facility horticulture and hydroponic cultivation methods increase, requiring the management of waste water generated. In this study, the amount of fertilizer contained in the discharged waste liquid was determined. By evaluating this as a price, it was suggested to reduce water treatment costs and recycle fertilizer components. It was evaluated based on the results of major water quality analysis of waste liquid by crop, such as tomatoes, paprika, cucumbers, and strawberries, and in the case of P component, it was analyzed by converting it to the amount of phosphoric acid (P₂O₅). The amount of nitrogen (N) can be calculated by discharging 1,145.90kg·ha^-1 of tomatoes, 920.43kg·ha^-1 of paprika, 804.16kg·ha^-1 of cucumbers, 405.83kg·ha^-1 of strawberries, and the fertilizer content of P₂O₅ is 830.65kg·ha^-1 of paprika, 622.32kg·ha^-1 of tomatoes, 477.67kg·ha^-1 of cucumbers. In addition, trace elements such as potassium (K), calcium (Ca), magnesium (Mg), iron (Fe), and manganese (Mn) were also analyzed to be emitted. The price per kg of each item calculated by averaging the price of fertilizer sold on the market can be evaluated as KRW, N 860.7, P 2,378.2, K 2,121.7, Ca 981.2, Mg 1,036.3, Fe 126,076.9, Mn 62,322.1, Zn 15,825.0, Cu 31,362.0, B 4,238.0, Mo 149,041.7. The annual fertilizer loss amount for each crop was calculated by comprehensively considering the price per kg calculated based on the market price of fertilizer, the concentration of waste by crop analyzed earlier, and the average annual emission of hydroponic cultivation. As a result of the analysis, the average of the four hydroponic crops was 5,475,361.1 won in fertilizer ingredients, with tomatoes valued at 6,995,622.3 won, paprika valued at 7,384,923.8 won, cucumbers valued at 5,091,607.9 won, and strawberries valued at 2,429,290.6 won. It was expected that if hydroponic drainage is managed through self-treatment or threshing before discharge rather than by leaking it into a river and treating it as a pollutant, it can be a valuable reusable fertilizer ingredient along with reducing water treatment costs.

• Food Science and Preservation
• /
• v.24 no.8
• /
• pp.1067-1078
• /
• 2017

This study was carried out to investigate the physicochemical and antioxidant properties of fermented milk with addition of hot water extract of Cordyceps militaris grown upon Tenebrio molitor. The general components of Cordyceps militaris grown upon Tenebrio molitor are moisture 10.85%, crude protein 18.44%, crude fat 2.07%, crude ash 5.46%. The DPPH radical scavenging activities of different solvents were the highest (74.81 EDA%) with hot water extract sample. The acidity of fermented milk was high with increasing amount of extracts. The pH of fermented milk reached 4.60-4.66 after 4 h of fermentation, and the number of lactic acid bacteria was highest (11.70 log CFU/mL) with 1% fermented milk. The moisture content of fermented milk showed no significant difference. In addition, contents of crude protein were not significantly different according to addition amount. Regarding Hunter's color values, L value decreased as the amount of extract increased, whereas a value and b value increased. The content of free amino acid increased with increasing amount of extract. The DPPH free radical scavenging ability and ABTS free radical scavenging ability of fermented milk were significantly different as the addition amount of extract increased. In the sensory evaluation, fermented milk containing 1% of extract showed the highest preference.

• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.237-244
• /
• 1978

Among the strains isolated form the various sources, the strain AC-12 producing a powerful pectinase was selected by the extensive screening test. The selected strain was indentified and its toxicity investigated. The conditions of the pectinase production, the characteristics of the purified enzyme and the clarification effect on the apple juice were studied. 1. The selected strain AC-12 was identified by the classification method of paper and fennel and named as Aspergillus sp. AC-12. 2. As a result of the breeding test of the white mouse, no toxicity was found from this enzyme. 3. The yield of pectinase in the medium of defatted rice bran was much better than that in the medium of wheat bran. 4. The optimum conditions for the culture of the strain in the medium of defatted rice bran were that the cultural time was 72hrs, the amount of water to be added about 80%, temperature $30{\sim}35^{\circ}C$ and pH $3.0{\sim}5.0$. 5. The yield of pectinase was slightly increased by the addition of pectin to the medium of defatted rice bran and by the addition of pectin, $NaNO_3$ and $K_2HPO_4$ to the medium of wheat bran, respectively. 6. The optimum conditions for the enzyme activity were pH $3.0{\sim}4.0$ and temperature $40{\sim}50^{\circ}C$. The enzyme was stable below $40^{\circ}C$ and pH $2.0{\sim}8.0$, respectively. But above $50^{\circ}C,$ this enzyme was abruptly inactivated. The activity was slightly increased by the addition of $MnSO_4\;and\;CuSO_4.$ 7. It was regarded that the opimum temperature for the clarification of the apple juice was $40{\sim}50^{\circ}C$, the optimum pH 3.0 and the optimun concentration of the enzyme 0.1%, and the apple juice was almost clarified by the reaction at $45^{\circ}C$ for 60 minutes.

• The Korean Journal of Mycology
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1975

Since the importance of casing in fruit body formation of Agaricus bisporus has been emphasized, physico-chemical characteristics of casing materials were discussed by many workers and a mixture of peat and mineral soil as proper casing material has been adopted in many of mushroom growing countries. Because of limited resources of peat in Korea, it is necessary to find practical performance and substitutional materials for casing. The effect of casing on mycelial growth and mushroom yield of A. bisporus varied with materials, its combination and practices etc. The experiments to be discussed in this paper are concerned with pH and Ca of casing material which influence A bisporus, and changes of physico-chemical characteristics with mixing ratio of casing materials and its effect on A. bisporus. The optimum range of moisture content of each material, management of watering and application of physico-chemical characteristics casing materials was also investigated and re-use of weathered spent compost for casing material was described. 1. The effect of calcium on mycelial growth of A. bisporus at various pH in Halbschalentest showed different results with calcium sources. Best results were obtained around neutrality and fresh weight of fruit bodies grown in the range of pH 7 to 8 was highest among the tested levels. 2. Available moisture, pore space, organic matter, cation exchangeable capacity and exchangeable cation was increased by an increase of mixing ratio of peat in casing materials, while an adverse effect was obtained by addition of sand. 3. Mycelial growth on clay loam was more rapid at a lower bulk density of 0.75g/cc and at 20% moisture content on a dry weight basis at the same bulk density. 4. Mixing ratio of casing materials, 60 to 80 per cent by volume of peat mixed with 20 to 40 per cent of clay loam produced the highest yield of fresh fruit bodies and sand the lowest. However, per cent of open cap was highest in peat and lowest in sand. 5. Days required for fruit body initiation was shortened in mixtures of peat and clay loam by one to three days compared with other materials and the formation of flushes was clear. 6. The effect of some physico-chemical characteristics of casing materials on the fresh weight of fruit bodies were estimated by a multiple regression equation; Y=-923.86+$8.18X_1+8.04X_2+7.90X_3+0.12X_4+2.03X_5-0.82X_6-0.54X_7$ where $X_1,X_2,X_3,X_4,X_5,X_6,X_7$ are sand, silt, clay, available moistuer, porosity, organic matter and exchangeable cation respectively. The productivity of certain casing material could be predicted from this equation. 7. Fresh weight of fruit bodies was positively correlated with porosity exchangeable cation, organic matter, available moisture, silt and clay of materials; while sand was negatively correlated. On the contrary, sand was the unique factor reducing per cent of open cap. 8. Distribution of three phases of high productive casing material was concentrated in the range of 10 to 30 per cent solids, 15 to 30 per cent liquids, and 50 to 60 per cent in air volume. 9. Fresh weight of fruit bodies from peat was not affected with heavy watering but in clay loam and sandy loam severe crop losses occurred. Fresh weight of individual fruit was increased and open caps were decreased with heavy watering but light watering resulted in adverse effects: its effect was especially great in peat. 10. Optimum range of moisture content by weight on a dry basis was different with each casing material. To maintain optimum moisture content concerned with yield of fruit bodies and open cap, sandy loam and peat mixtures required daily watering of 0.6, 0.6 to 1. 2 and 1.2 to 2.4 liters per $3.3m^2$ of bed area, respectively. 11. Maximum yield of fruit body was recorded in the range of pF 2. 0 to 2. 5 of casing materials if organic matter content was below 4.2 per cent and in pF 1. 3 to 1.8 if above 7.1%. 12. pF curve of a certain casing material could be draws from moisture content at various pF values by multiple regression equations provided texture, organic matter and calcium of the casing material are given. Optimum moisture range of the casing materials also could be estimated by the equation. 13. It was possible to improve the phyico-chemical characteristics of clay loam and sandy loam by addition of weathered spent compost although the effect was less than in the case of peat. Fresh weight of fruit bodies wsa increased by addition of weathered spent compost but its effect was not as remarkable as peat. Accordingly, further studies will be required.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.6
• /
• pp.808-815
• /
• 2007

Four different herbs, including rosemary, oregano, basil and sage, along with green tea were individually added to ground beef at different percentages: 0.5, 1.0, and 1.5, respectively. The sensory qualities of the five natural herbs and their antioxidant effects were evaluated using Beef-Yukwonjeon. For the sensory evaluation results, the 0.5% herb addition and the control group generally showed higher acceptability scores than the 1.0% or 1.5% herb addition groups. In particular, the Yukwonjeon made with 0.5% green tea showed higher preferences in the acceptance tests and ranking tests. However, the sensory differences among samples were reduced after 3 days of storage at $6^{\circ}C$. For the results of lipid oxidation without storage, the TBARS values of the herb addition groups were slightly lower than the value of the control group, but not significantly(p>0.05). However, the antioxidant effects of each herb showed higher values over a longer storage period as well as at the higher herb concentrations. The antioxidant effects of the herbs during 7 days' of storage at $6^{\circ}C$ were evaluated as $10.0{\sim}38.5%$ reductions in TBARS values as compared to the group without herbs. Furthermore, the antioxidant effects of the herbs during 30 days' of storage at $-20^{\circ}C$ were shown as $16.8{\sim}27.8%$ reductions in the TBARS value. The green tea showed the highest antioxidant activity against lipid oxidation, because it was acceptable at higher concentrations in the sensory evaluation. These results indicate the potential to produce better quality beef-Yukwonjeon, with herbs, especially green tea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.1
• /
• pp.29-34
• /
• 1974

On a newly reclamed acidic Song-jong soil (soil of a member of fine loamy, mesic family of Hapludults) an experiment was carried out to find out the proper measure of the improvement of soil fertility with soybean as test crop. Results are summarized as follow: 1. Application of compost (1 ton/10a), lime (lime requirement)and fused phosphate (equivalent to 5% of the phosphate fixation coefficient)resulted in the increase of soybean yield by 93.3% over the check plot (N: 6kg/10a, $P_2O_5$: 9kg/10a, $K_2O$: 6kg/10a). The application of fused phosphate at the level of 5% of phosphate fixation coefficient N (6kg/10a) and K(6kg/10a) brought the yield increase by 62.7% over the check plot. However, although the pH of the soil was adjusted to 7.0 by liming, the application of lime with moderate dose of phosphate ($P_2O_5$: 9kg/10a) did not increase the yield of soybean significantly. And the application of fused phosphate at the level of 5% of phosphate fixation coefficient increased the available soil P from 14 ppm to around 100 ppm as tested after harvest. 2. Application of compost (1 ton/10a) increased the organic matter content of soil by 0.8% when tested after harvest. While, the application of rice straw (0.5 ton/10a) did not alter the soil organic matter content. The CEC of the soil tested after havest found incereased significantly by the addition of lime and compost. 3. Plant analysis revealed that the $K_2O/Ca+Mg$ is better correlated with the yield than the absolute concentration of $K_2O$ in plant tissue. Between the concentration of $P_2O_5$ in plant tissue and the yield of soybean, a typical C-curve relationship was observed, indicating that in this particular soil, phosphate was the primary growth liming factor.