• 전자공학회논문지T
• /
• 제36T권3호
• /
• pp.13-18
• /
• 1999

다이아몬드 박막은 RF PACVD법에 의해 수소와 메탄으로부터 실리콘 웨이퍼 상에 성장되어졌다. 박막 성장 전에 표면의 핵생성 밀도를 증가시키기 위하여 1㎛의 다이아몬드 페이스트로 기계적 흡집을 내어 사용하였다. 메탄 농도를 변화시켜 제작한 박막에 대한 평가는 XRD, SEM 및 Raman Spectroscopy에 의해 이루어졌다. 성장된 박막의 결정성은 메탄 농도가 낮을수록 증가되었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권4호
• /
• pp.1-9
• /
• 1999

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권2호
• /
• pp.49-56
• /
• 2001

Diamond thin films have been deposited on the silicon substrate by inductively coupled radio frequency plasma enhanced chemical vapor deposition system. The morphological features of thin films depending on methane concentration and deposition time have been studied by scanning electron microscopy and Raman spectroscopy. The diamond particles deposited uniformly on silicon substrate($10{\times}10[mm^2]$) at the pressure of 1[torr], a methane concentration of 1[%], a hydrogen flow rate of 60[sccm], a substrate temperature of $840\{sim}870[^{\circ}C]$, an input power of 1[kw], and a deposition time of 1[hour]. With increasing deposition time, the diamond particles grew, and than about 3 hours have passed, the graphitic phase carbon thin film with "cauliflower-like" morphology deposited on the diamond thin films.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.401-411
• /
• 1990

Deposition of diamond films on Si(100) from the mixtures of methane and hydrogen were investigated using hot W filament CVD method. The nucleation density could be increased thousandfold by surface treatment with SiC powder. Upon oxygen addition to the mixture, crystal facets became developed more clearly by selectively removing non-diamond carbons, but the film growth rate generally decreased. However, at a very high methane content(e.g. 10%), a small amount of oxygen addition has resulted in an increase in the film deposition rate presumably by promotion of methane decomposition. When the gas pressure was varied, the growth rate exhibited a maxiumum at around 20torr and the film crystallinity steadily improved with the pressure increase. The observed variation of the growth rate by oxygen addition was discussed in terms of its role in the pyrolysis and the subsequent gas phase reactions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1533-1536
• /
• 2001

To grow the diamond films by using RF-MW two step process, at first, diamond seeds were deposited on silicon substrate by RF plasma CVD, and then a diamond layer grown by MW plasma CVD on the seeds. The grain-size of diamond films deposited by using RF-MW two step process was smaller and denser and also, crystallity of diamond film was better than those of the MW plasma CVD process. The deposited diamond films were analyzed by SEM(scanning electron microscophy), XRD (x-ray diffraction), and Raman spectroscopy.

• 한국세라믹학회지
• /
• 제32권7호
• /
• pp.793-798
• /
• 1995

The relaxation of the intrinsic stresses in the diamond films fabricated by the hot filament CVD was studied, and it was confirmed that the tensile intrinsic stresses in the films could be controlled without any degradation in the quality of the diamond films. The tensile intrinsic stresses in the films decreased from 2.97 to 1.42 GPa when the substrate thickness increased from 1 to 10mm. This result showed that the residual stress was affected by the substrate thickness as well as by the interaction between grains. Applying of ＋50 V between the W filament and the Si substrate during deposition, the tensile intrinsic stress in the film deposited at 0 V was decreased from 2.40 GPa to 0.71 GPa. Such large decrease in the tensile intrinsic stress was due to $\beta$-SiC which acted as a buffer layer for the stress relaxation. However, the application of the large voltage above ＋200V resulted in the change of quality of the diamond film, and nearly had no effect on relaxation in the tensile intrinsic stress.

• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.88-96
• /
• 1994

Hot filament-assisted CVD was carried out to deposit diamond films on Si(100) substrate at 90$0^{\circ}C$ using a 1% CH4-H2 mixture gas. Deposition was made at various conditions of mass flow rate of the feed gas (30~1000 sccm), pressure (2.5~300 Torr), and filament-substrate distance (4~15 mm), and the deposited films were characterized by SEM, XRD, and Raman spectroscopy. As the flow rate increases, the growth rate also increased but the crystallinity of the film was degraded. A longer filament-substrate distance simply caused both the growth rate and the crystallinity to become poorer. On the other hand, the pressure variation resulted in a maximum growth rate of 2.6 ${\mu}{\textrm}{m}$/hr at 10 Torr and the best film quality around 50 Torr, exhibiting an optimum condition. The observed trends were interpreted in terms of the flow velocity-dependent pyrolysis reaction efficiency and mass transport through the boundary layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.246-249
• /
• 1997

Diamond thin films were deposited on Si wafer from a mixture of CE$_4$ and H$_2$ by RF Plasma CVD. The films were de77sited under the following conditions : discharge power of 500w, H$_2$ flow rate of 30sccm, chanter pressure of 20∼50Torr, and CH$_4$ concentration of 0.5∼2%. The deposition time was 30∼40 hours because of low growth rate. The deposited films were characterized by Scanning Electron Microscopy and X-ray Diffraction method.

• 열처리공학회지
• /
• 제34권2호
• /
• pp.75-80
• /
• 2021

The crystal grains of polycrystalline diamond vary depending on deposition conditions and growth thickness. The diamond thin film deposited by the CVD method has a very rough growth surface. On average, the surface roughness of a diamond thin film deposited by CVD is in the range of 1-100 um. However, the high surface roughness of diamond is unsuitable for application in industrial applications, so the surface roughness must be lowered. As the surface roughness decreases, the scattering of incident light is reduced, the heat conduction is improved, the mechanical surface friction coefficient can be lowered, and the transmittance can also be improved. In addition, diamond-coated cutting tools have the advantage of enabling ultra-precise machining. In this study, the surface roughness of diamond was improved by thermal diffusion reaction between diamond carbon atoms and ferrous metals at high temperature for diamond thin films deposited by MPCVD.

• 한국진공학회지
• /
• 제9권2호
• /
• pp.110-115
• /
• 2000

열-필라멘트 CVD 장치를 이용하여 다이아몬드 박막의 증착 조건을 최적화시켰다. $B_4C $ 고체 펠렛을 사용하여 보론두핑된 다이아몬드 박막을 제조하여 그 질적 특성을 알아보고, 전류전압 특성과 전계 방출 측정을 통해 박막의 전계방출소자(field emission display (FED)로의 특성을 조사하였다. 보론 도핑의 양이 증가함에 따라 다이아몬드 결정의 평균 입자 크기가 조금씩 감소하지만 다이아몬드의 질은 소량 도핑인 경우에 크게 바뀌지 않았다. Al/Diamond/p-Si 소자의 전류전압 특성을 조사한 결과 도핑된 다이아몬드 박막의 전류는 도핑되지 않은 박막의 전류에 비해 $10^4$~$10^5$배 정도 증가하였다. 전계방출 특성을 조사한 결과 보론-도핑이 증가함에 따라 점차 낮은 전기장에서 전자를 방출하며, 또한 높은 방출 전류를 나타냈다. 전자가 방출되기 시작하는 onset-field는 펠렛의 수가 2개일 때 15.5 V/$\mu\textrm{m}$, 3개일 때 13.6 V/$\mu\textrm{m}$, 4개일 때는 11.1 V/$\mu\textrm{m}$. 체계적으로 감소하였다. 도핑의 강도가 세어짐에 따라 Fowler-Nordheim 그래프의 기울기는 감소하는 경향을 보였으며, 이로서 보론 도핑으로 인해 유효 장벽 에너지가 감소되어 전자 방출 특성이 향상됨을 알 수 있었다.