• 공업화학
• /
• 제29권1호
• /
• pp.18-21
• /
• 2018

본 연구에서는 대용량 구조 촉매의 제조 및 활용 가능성을 확인하고자 셀 밀도가 높은 세라믹 허니컴 구조체와 온도조절 화학기상증착법을 활용하여 촉매를 제조하고 건식 개질 반응에 대한 촉매 활성을 평가하였다. 셀 밀도 600 cpsi 코디어라이트 허니컴(CDR)을 대상으로 니켈을 코팅한 NiO/CDR 촉매는 코팅 조건과 시간을 조절함으로써 허니컴 구조체 셀 내부까지 충분한 균일 증착이 가능하였다, $800^{\circ}C$, 공간속도 $10,000h^{-1}$과 $CH_4$와 $CO_2$를 1 : 1로 주입한 조건에서 $CH_4$는 약 83%, $CO_2$는 약 90% 이상의 우수한 전환율을 보여 건식 개질 반응에 효과적으로 적용이 가능하다는 것을 확인하였다. 이 결과를 토대로 대면적, 대용량 촉매 제조 시 온도조절 화학기상증착법이 매우 유용하게 활용될 수 있음을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.221.2-221.2
• /
• 2015

Graphene is very interesting 2 dimensional material providing unique properties. Especially, graphene has been investigated as a stretchable and transparent conductor due to its high mobility, high optical transmittance, and outstanding mechanical properties. On the contrary, high sheet resistance of extremely thin monolayer graphene limits its application. Artificially stacked multilayer graphene is used to decrease its sheet resistance and has shown improved results. However, stacked multilayer graphene requires repetitive and unnecessary transfer processes. Recently, growth of multilayer graphene has been investigated using a chemical vapor deposition (CVD) method but the layer controlled synthesis of multilayer graphene has shown challenges. In this paper, we demonstrate controlled growth of multilayer graphene using a two-step process with multi heating zone low pressure CVD. The produced graphene samples are characterized by optical microscope (OM) and scanning electron microscopy (SEM). Raman spectroscopy is used to distinguish a number of layers in the multilayer graphene. Its optical and electrical properties are also analyzed by UV-Vis spectrophotometer and probe station, respectively. Atomic resolution images of graphene layers are observed by high resolution transmission electron microscopy (HRTEM).

• 한국진공학회지
• /
• 제12권1호
• /
• pp.70-77
• /
• 2003

전이금속을 촉매로 이용하여 화학기상증착법 (CVD)으로 탄소나노튜브 (CNT)를 성장시킬 때, 질소분위기가 성장을 증진시킨다는 사실은 잘 알려져 있다. 본 논문에서는 질소분위기에 의한 CNT 성장증진의 원인이 활성화 질소이며, 활성화 질소가 성장과정 중 CNT의 탄소와 결합함으로써 성장증진효과가 일어남을 보여주었다. 이 결과는 질소의 결합이 튜브상의 흑연판을 만드는데 필요한 탄성변형에너지를 낮추어 주는 역할을 한다는 CNx 박막의 이론적 계산결과와 일치한다. 따라서, 질소의 결합에 의한 CNT의 성장증진 효과는 튜브상의 흑연판 핵 생성과 CNT의 성장에 필요한 임계 에너지의 감소에 의한 것이다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 1986년도 Priceedings Of The Third Korea-Japan Seminar On New Ceramics
• /
• pp.287-304
• /
• 1986

High quality monocrystalline $\beta$-SiC thin films were grown via two-step process of conversion of the Si(100) surface by reaction with $C_2H_4$ and the subsequent chemical vapor deposition (CVD) at $1360^{\circ}C$ and 1 atm total pressure. Four dopants, B and Al and p-type, and N and P for n-type, were also incorporated into monocrystalline $\beta$-SiC thin films during the CVD growth process. IR and Raman spectroscopies were used to evaluate the quality of the undoped $\beta$-SiC thin films and to investigate the effects of dopants on the structure of the doped $\beta$-SiC thin films. The changes in the shape of IR and Raman spectra of the doped thin films due to dopants were observed. But the XTEM micrographs except for the B-doped and annealed films showed the same density and distribution of stacking faults and dislocations as was seen in the undoped samples, The IR and Raman spectra of the B-doped and annealed films showed the broad and weak bands and one extra peak at the 850 $cm^{-1}$ respectively. The SAD pattern and XTEM micrograph of the B-doped and annealed film provided the evidence for twinning.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.28-32
• /
• 2008

Hydrogenated microcrystalline silicon(${\mu}c$-Si:H) films were prepared using inductively coupled plasma chemical vapor deposition(ICP-CVD) method, electrical and optical properties of these films were studied as a function of silane concentration. And then, effect of $PH_3\;and\;B_2H_6$ addition on their electrical properties was also investigated for solar cell application. Characterization of these films from X-ray diffraction revealed that the conductive film exists in microcrystalline phase embedded in an amorphous network. At $PH_3/SiH_4$ gas ratio of $0.9{\times}10^{-3}$, dark conductivity has a maximum value of ${\sim}18.5S/cm$ and optical bandgap also a maximum value of ${\sim}2.39eV$. Boron-doped ${\mu}c$-Si:H films, satisfied with p-layer of solar cell, could be obtained at ${\sim}10^{-2}\;of\;B_2H_6/SiH_4$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.564-564
• /
• 2012

Graphene has been emerged as a fascinating material for future nanoelectronic applications due to its extraordinally electronic properties. However, their zero-bandgap semimetallic nature is a major problem for applications in high performance field-effect transistors (FETs). Graphene nanoribbons (GNRs) with narrow widths (${\geq}10nm$) exhibit semiconducting behavior, which can be used to overcome this problem. In previous reports, GNRs were produced by several approaches, such as electron beam lithography patterning, chemically derived GNRs, longitudinal unzipping of carbon nanotubes, and inorganic nanowire template. Using these methods, however, the width distribution of GNRs was a quiet broad and substantial defects were inevitably occurred. Here, we report a novel approach for fabricating width-tailored GNRs by focused ion beam-assisted chemical vapor deposition (FIB-CVD). Width-tailored phenanthrene ($C_{14}H_{10}$) templates for direct growth of GNRs were prepared on $SiO_2$/Si substrate by FIB-CVD. The GNRs on the templates were synthesized at $900-1,050^{\circ}C$ with introducing $CH_4$ $(20sccm)/H_2$ (10 sccm) mixture gas for 10-300 min. Structural characterizations of the GNRs were carried out using Raman spectroscopy, scanning electron microscopy, and atomic force microscopy.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.362-362
• /
• 2012

Graphene-based materials have been gaining the unprecedented academic and industrial applications, due to the unique charge transport as a new kind of 2-dimensional materials. The applications incorporate electronic devices, nonvolatile memories, batteries, chemical sensors, etc. based on the electrical, mechanical, structural, optical, and chemical features newly reported. The current work employs thermal chemical vapor deposition involving H2 and CH4, in order to synthesize the 2-dimensional graphene materials. The qualitative/quantitative characterizations of the synthesized graphene materials are evaluated using Raman spectroscopy and Hall Measurements, In particular, the effect of processing variables is systematically investigated on the formation of graphene materials through statistical design of experiments. The optimized graphene materials will be attempted towards the potential applications to flat-panel displays.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.387-390
• /
• 2002

This paper presents deposition and characterizations of microcrystalline silicon(${\mu}$c-Si:H) films prepared by hot wire chemical vapor deposition at substrate temperature below 300$^{\circ}C$. The SiH$_4$ concentration[F(SiH$_4$)/F(SiH$_4$).+(H$_2$)] is critical parameter for the formation of Si films with microcrystalline phase. At 6% of silane concentration, deposited intrinsic ${\mu}$c-Si:H films shows sufficiently low dark conductivity and high photo sensitivity for solar cell applications. P-type ${\mu}$c-S:H films deposited by Hot-Wire CVD also shows good electrical properties by varying the rate of B$_2$H$\_$6/ to SiH$_4$ gas. The solar cells with structure of Al/nip ${\mu}$c-Si:H/TCO/g1ass was fabricated with single chamber Hot-Wire CVD. About 3% solar efficiency was obtained and applicability of HWCVD for thin film solar cells was proven in this research.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.16-22
• /
• 2018

Silicon carbide (SiC) is used in various semiconductor processes because it has superior thermal, mechanical, and electrical characteristics as well as higher chemical and corrosion resistance than existing materials. Due to these characteristics, various manufacturing technologies have been developed for SiC. A recent development among these technologies is Chemical Vapor Deposition SiC (CVD-SiC). Many studies have been carried out on the processing and manufacturing of CVD-SiC due to its different material characteristics compared to existing materials like RB-SiC or Sintered-SiC. CVD-SiC is physically stable and has excellent chemical and corrosion resistance. However, there is a problem with increasing the thickness, because it is manufactured through a deposition process. Additionally, due to its high strength and hardness, it is difficult to subject to machining.

• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.119-124
• /
• 2011

Flow and temperature field in reactors are important factors for design of thermal chemical vapor deposition system to grow carbon nanotubes. In this study, effects of the variations of the inlet and outlet areas of the CVD reactor to the flow characteristics and temperature field are numerically analyzed. High temperature of the gas in the entrance region is obtained with slow gas speed resulted from the enlarged inlet area. Variation of the exit area has little effects on the flow field and temperature in the reactor. However the largest area among considered cases gives the highest gas temperature though the differences are small.