• 제목/요약/키워드: CT voltage

검색결과 164건 처리시간 0.03초

흉부 Phantom을 이용한 Low Dose CT의 관전압과 ASIR(Adaptive Statistical Iterative Reconstruction)적용에 따른 영상평가 및 피폭선량에 관한 연구 (A study of image evaluation and exposure dose with the application of Tube Voltage and ASIR of Low dose CT Using Chest Phantom)

  • 황혜성;김누리;정윤지;구은회;김기정
    • 대한디지털의료영상학회논문지
    • /
    • 제16권2호
    • /
    • pp.9-14
    • /
    • 2014
  • Purpose: The purpose of this study has attempted to evaluate and compare the image evaluation and exposure dose by respectively applying Filtered Back Projection(FBP), the existing test method, and Adaptive Statistical Iterative Reconstruction(ASIR) with different values of tube voltage during the Low Dose Computed Tomography(LDCT). Materials and Methods: With the image reconstruction method as basis, Chest Phantom was utilized with the FBP and ASIR set at 10%, 20% respectively, and the change of Tube Voltage (100kVp, 120kVp). For image evaluation, Back ground noise, Signal to Noise ratio(SNR) and Contrast to Noise ratio(CNR) were measured, and, for dose evaluation, CTDIvol and DLP were measured respectively. The statistical analysis was tested with SPSS(ver. 22.0), followed by ANOVA Test conducted after normality test and homogeneity test. (p<0.05). Results: In terms of image evaluation, there was no outstanding difference in Ascending Aorta(AA) SNR and Infraspinatus Muscle(IM) SNR with the different values of ASIR application(p<0.05), but a significant difference with the different amount of tube voltage(p>0.05). Also, there wasn't noticeable change in CNR with ASIR and different amount of Tube Voltage (p<0.05). However, in terms of dose evaluation, CTDIvol and DLP showed contrasting results(p<0.05). In terms of CTDIvol, the measured values with the same tube voltage of 120kVp were 2.6mGy with No-ASIR and 2.17mGy with 20%-ASIR respectively, decreased by 0.43mGy, and the values with 100kVp were 1.61mGy with No-ASIR and 1.34mGy with 20%-ASIR, decreased by 0.27mGy. In terms of DLP, the measured values with 120kVp were $103.21mGy{\cdot}cm$ with No-ASIR and $85.94mGy{\cdot}cm$ with 20%-ASIR, decreased by $17.27mGy{\cdot}cm$(about 16.7%), and the values with 100kVp were $63.84mGy{\cdot}cm$ with No-ASIR and $53.25mGy{\cdot}cm$ with 20%-ASIR, a decrease by $10.62mGy{\cdot}cm$(about 16.7%). Conclusion: At lower tube voltage, the rate of dose significantly decreased, but the negative effects on image evaluation was shown due to the increase of noise. For the future, through the result of the experiment, it is considered that the method above would be recommended for follow-up patients or those who get health checkup as long as there is no interference on the process of diagnosis due to the characteristics of Low Dose examination.

  • PDF

생물학적 축산폐수 처리수 색도제거를 위한 전기화학적 방법의 적용 (Application of Electrochemical Method for Decolorization of Biologically Treated Animal Wastewater Effluent)

  • 윤성준;신종서;라창식
    • Journal of Animal Science and Technology
    • /
    • 제48권2호
    • /
    • pp.315-324
    • /
    • 2006
  • This research was conducted to clarify the characteristics of electrochemical decolorization of effluent discharged from a biological animal wastewater treatment process and to finally establish parameters or mode for optimum operation of electrolysis system. Average color unit of wastewater was about 1,200 and DSA(Dimensionally Stable Anode) was used as electrode. Experiments were performed with two different operation conditions or modes, fixed voltage-free current(Run A) and free voltage-fixed current(Run B). Color removal rate was proportional to the electrode area and electrical conductivity, and an equation subject to them at a condition of fixed voltage was derived as follows; Ct=C0ekt, k=[{0.0121×a(dm2)× c(mS/cm)}+0.0288], [where, C0: initial color, Ct: color unit after treatment for t, k: reaction coefficient, t: time(min.), a: electrode area, c: conductivity]. From the study on the effects of current density on color removal, it was revealed that the removal efficiency of color was function of the current density, showing direct proportion. However, when considered energy consumption rate, maintenance of low current density was an economical way. Based on the obtained results, it was concluded that supplementation of electrolyte is not necessary for the removal of color from the effluent of secondary treatment process and operation with the mode of free voltage-fixed current, rather than operation with fixed voltage-free current mode, would be an efficient way to increase the removal performance and capacity per consumed energy.

이동형 전산화단층촬영장치의 기본 안전 및 필수 성능 기준을 마련하기 위한 연구 (A Study on Establishment of Basic Safety and Essential Performance Criteria of Mobile Computed Tomography)

  • 김은혜;박혜민;김정민
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제44권3호
    • /
    • pp.261-267
    • /
    • 2021
  • As the number of Coronavirus Disease-19 (COVID-19) patients increases in a global pandemic situation, the usefulness of mobile computed tomography (CT) is gaining attention. Currently, mobile CT follows the basic safety and essential performance evaluation criteria of whole-body or limited-view X-ray CT in order to obtain device approval and evaluation in the Republic of Korea. Unlike stationary CT, mobile CT is not operated in shielded areas but rather areas such as intensive care units, operating rooms, or isolation rooms. Therefore, it requires a different basic safety and essential performance evaluation standard than stationary CT. In this study, four derived basic safety evaluation criteria related to electrical, mechanical, and radiation safety were included (dose indication test, protection against stray radiation, safety measures against excessive X-rays, half-value layer measurement); and seven essential performance evaluation criteria were included (tube voltage accuracy, mAs accuracy, radiation dose reproducibility, CT number of water, noise, uniformity, and spatial resolution); total eleven basic safety and essential performance evaluation criteria were selected. This study aims to establish appropriate basic safety and essential performance evaluation criteria for simultaneously obtaining images with diagnostic value and reducing the exposure of nearby patients, medical staff, and radiologic technologists during the use of mobile CT.

CT 관전압이 상용 전산화치료계획장치의 선량계산에 미치는 영향 (The Effects of the CT Voltages on the Dose Calculated by a Commercial RTP System)

  • 강세권;조병철;박희철;배훈식
    • 한국의학물리학회지:의학물리
    • /
    • 제15권1호
    • /
    • pp.23-29
    • /
    • 2004
  • CT관전압 및 기종의 변화에 따른 전자밀도 환산곡선 값의 변화가 상용 전산화치료계획장치의 선량계산 결과에 미치는 영향을 고찰하였다. CT기종 및 관전압을 달리하며 전자밀도 환산용 팬톰에 대한 CT 영상을 얻어서 여러 조직등가물질에 대해 전자밀도와 CT수의 관계를 구하였다. 동일 전자밀도에 대해 관전압이 감소함에 따라 고밀도의 골조직으로 갈수록 큰 CT수를 보였으며, 연조직에서는 거의 차이가 없었다. 전자밀도 환산곡선 값의 변화가 선량계산 결과에 미치는 정도를 알아보기 위하여 치료계획장치 상에서 폐조직과 골조직을 포함하는 물 팬톰을 그려서 만들고, 이들 가상 조직의 후방 위치에서 6 MV 광자선에 의한 선량을 계산하였다. 그 결과 폐조직, 물, 골조직의 순서로 선량이 높았으며, 골조직에 의한 선량은 관전압이 낮을수록 높은 값을 보였고, 이는 10 MV의 경우에도 동일하였다. 임상 적용의 예로서 폐 및 골반 부위의 CT 영상을 이용한 선량계산에서는 6 MV 및 10 MV모두 전자밀도 환산곡선 값의 변화에 따른 차이는 없었으며, 전자밀도 환산곡선을 구하는데 이용한 CT 기기와 선량을 계산하는데 이용한 영상을 얻은 CT 기기가 다른 데서 오는 것으로 판단되는 오차로서 최대 1.5%의 상대선량차이를 보였다.

  • PDF

검사 조건 제어와 반복 재구성의 조합을 이용한 흉부 CT의 선량 저감화 방안 (Dose Reduction Method for Chest CT using a Combination of Examination Condition Control and Iterative Reconstruction)

  • 김상현
    • 한국방사선학회논문지
    • /
    • 제17권7호
    • /
    • pp.1025-1031
    • /
    • 2023
  • 저선량흉부 CT (Low Dose chest CT, LDCT)에서 Scout 관전압을 변화시키고 scan parameter인 자동노출제어장치(Auto Exposure Control, AEC)와 적응식 반복재구성기법(Adaptive Statistical Iterative Reconstruction, ASIR)등을 적용하여 최적의 프로토콜을 찾음으로써 방사선 피폭선량과 화질을 평가하고자 하였다. Scout 관전압을 80, 100, 120, 140 kV로 변화시키며 LDCT 프로토콜로 5회 반복 측정 후 선량을 비교하기 위해 장비에서 제공된 Dose report를 이용하여 연구 목적에 적합한 관전압을 선택하였다. 120 kV, 30 mAs의 조건으로 기본 LDCT 촬영한 후, 이 조건에 ASIR 50%를 적용하였으며 신호대잡음비와 대조도대잡음비를 평가하기 위해 배경의 노이즈를 측정하였다. 선량 비교를 위해 장비에서 제공되는 CTDIvol과 선량길이곱(Dose length product, DLP)를 식을 이용하여 비교 분석하였다. 그 결과 S140 + LDCT + ASIR 50 + AEC를 적용한 프로토콜에서 고식적인 LCDT보다 방사선 피폭선량을 감소시키고 영상의 질을 향상시켰으며 최적의 프로토콜을 얻을 수 있었으며 LDCT는 매 검사 시 필요 이상의 피폭선량이 우려되기 때문에 적절한 Parameter를 적용하는 것이 중요하며, 향후 LDCT를 이용한 건강검진에서 국민의 건강에 이바지 하는데 긍정적인 요인으로 작용될 것으로 사료된다.

Reliability of Skeletal Muscle Area Measurement on CT with Different Parameters: A Phantom Study

  • Dong Wook Kim;Jiyeon Ha;Yousun Ko;Kyung Won Kim;Taeyong Park;Jeongjin Lee;Myung-Won You;Kwon-Ha Yoon;Ji Yong Park;Young Jin Kee;Hong-Kyu Kim
    • Korean Journal of Radiology
    • /
    • 제22권4호
    • /
    • pp.624-633
    • /
    • 2021
  • Objective: To evaluate the reliability of CT measurements of muscle quantity and quality using variable CT parameters. Materials and Methods: A phantom, simulating the L2-4 vertebral levels, was used for this study. CT images were repeatedly acquired with modulation of tube voltage, tube current, slice thickness, and the image reconstruction algorithm. Reference standard muscle compartments were obtained from the reference maps of the phantom. Cross-sectional area based on the Hounsfield unit (HU) thresholds of muscle and its components, and the mean density of the reference standard muscle compartment, were used to measure the muscle quantity and quality using different CT protocols. Signal-to-noise ratios (SNRs) were calculated in the images acquired with different settings. Results: The skeletal muscle area (threshold, -29 to 150 HU) was constant, regardless of the protocol, occupying at least 91.7% of the reference standard muscle compartment. Conversely, normal attenuation muscle area (30-150 HU) was not constant in the different protocols, varying between 59.7% and 81.7% of the reference standard muscle compartment. The mean density was lower than the target density stated by the manufacturer (45 HU) in all cases (range, 39.0-44.9 HU). The SNR decreased with low tube voltage, low tube current, and in sections with thin slices, whereas it increased when the iterative reconstruction algorithm was used. Conclusion: Measurement of muscle quantity using HU threshold was reliable, regardless of the CT protocol used. Conversely, the measurement of muscle quality using the mean density and narrow HU thresholds were inconsistent and inaccurate across different CT protocols. Therefore, further studies are warranted in future to determine the optimal CT protocols for reliable measurements of muscle quality.

전산화단층촬영 소아 흉부검사에서 관전압의 변화에 따른 화질변화에 관한 연구 (A Study on the Change of Image Quality According to the Change of Tube Voltage in Computed Tomography Pediatric Chest Examination)

  • 김구;김경립;성순기;곽종혁
    • 한국방사선학회논문지
    • /
    • 제13권4호
    • /
    • pp.503-508
    • /
    • 2019
  • 흉부 CT 검사의 스캔 기법의 하나인 VOLUME AXIAL MODE를 이용하여 관전압의 변화에 따라 진단적으로 가치가 높은 영상을 얻기 위하여 화질을 평가하고 적절한 관전압을 제시하고자 한다. CT 장비는 GE사의 Revolution(GE Healthcare, Wisconsin USA)모델을 이용하였으며, Phantom은 Pediatric Whole Body Phantom PBU-70을 사용하였다. Heart의 SNR 평균차이분석에서는 70 kvp에서 $-4.53{\pm}0.26$ 이었고 80 kvp는 $-3.34{\pm}0.18$ 이었으며 100 kvp는 $-1.87{\pm}0.15$이었고 70 kvp가 100kvp 보다 약 -2.66정도 SNR이 높았으며 통계적으로 유의하였다.(p<0.05) Lung의 SNR 평균차이분석에서는 70 kvp에서 $-78.20{\pm}4.16$이었고 80 kvp는 $-79.10{\pm}4.39$이었으며 100 kvp는 $-77.43{\pm}4.72$이었고 70 kvp가 100 kvp 보다 약 -0.77정도 SNR이 높았으며 통계적으로 유의하였다.(p<0.05). Lung의 CNR 평균차이분석에서는 70 kvp에서 $73.67{\pm}3.95$이었고 80 kvp는 $75.76{\pm}4.25$이었으며 100 kvp는 $75.57{\pm}4.62$이었고 80 kvp가 70 kvp 보다 약 20.9정도 CNR이 높았으며 통계적으로 유의하였다.(p<0.05) 관전압 100 kvp에서는 70 kvp와 80k vp를 비교 했을 때 심장 영상의 질을 유지하면서 SNR이 1에 가까웠다. 하지만 70 kvp와 80kvp에서는 SNR 차이가 없어 70 kvp 로 소아 흉부 CT 검사를 하여 방사선량을 줄일 수 있을 것이다. 반면에 CNR은 70 kvp에서 가장 1에 근사치를 나타냈었으며 80kvp와 100kvp에서는 차이가 없어 80 kvp로 소아 흉부 CT 검사를 하여 방사선량을 줄일 수 있을 것이다. 또한 Volume Axial mode 검사 시 0.3초의 짧은 scan time으로 검사 할 수 있어서 움직이거나 진정이 필요한 소아환자에게 유용할 것으로 사료된다.

Megavoltage Cone-Beam CT 영상의 변환을 이용한 선량 계산의 정확성 향상 (Improvement of the Dose Calculation Accuracy Using MVCBCT Image Processing)

  • 김민주;조웅;강영남;서태석
    • 한국의학물리학회지:의학물리
    • /
    • 제23권1호
    • /
    • pp.62-69
    • /
    • 2012
  • 적응 방사선 치료(Adaptive Radiation Therapy, ART)를 실행하기 위한 매 치료 마다 획득되는 Megavoltage cone-beam CT (MVCBCT) 영상을 이용한 재 선량 계산 과정은 필수적이다. 본 연구의 목적은 intensity 보정 방법을 적용한 MVCBCT 영상 기반의 선량 계산 결과와 kilo-voltage CT (kV CT) 영상 기반의 선량 계산 결과의 비교 및 MVCBCT 영상 기반의 선량계산 정확성의 향상이다. MVCBCT 영상의 intensity 교정을 위해 kV CT와 MVCBCT을 이용하여 12 종류의 전자밀도 바를 제공하는 Cheese 팬텀 영상을 획득하고, Cheese 팬텀 영상의 동일한 전자밀도 바에서 표현되는 kV CT 영상과 MVCBCT 영상의 intensity 관계를 도출하였다. 이후 kV CT, MVCBCT를 이용한 Rando 팬텀 영상을 획득하여 MVCBCT 영상은 3차원 강체 정합을 수행하였고 본 과정을 통해 MVCBCT 영상은 kV CT 영상과 마치 동일한 모달리티에서 획득한 영상과 같은 위치 및 intensity 분포로 변환되었고, MVCBCT 영상의 잡음을 없애기 위한 Gaussian smoothing 필터를 적용하였다. 위의 과정을 거친 MVCBCT 영상을 토대로 intensity 교정을 적용한 영상과, intensity 교정을 적용하지 않은 영상, kV CT영상을 기반으로 방사선 치료 계획 시스템을 이용한 선량 계산을 시행 하였다. 선량 계산의 결과는 선량 분포의 차이 및 Percentage difference로 평가되었다. Intensity 보정을 적용한 MVCBCT 영상의 선량 계산 결과의 경우 kV CT 영상 기반의 선량 계산 결과와의 Percentage difference가 두경부 영상의 경우 1.08%, 흉부 영상의 경우 2.44%였다. 본 연구에서 적용한 intensity 변환을 통해 MVCBCT 영상을 이용한 선량 계산의 정확성이 향상됨을 확인하였고, 본 연구 방법은 실제 선량 계산에 적용 및 사용의 편리성을 확인하였다. 차후 연구 계획도 본 연구 내용에 의해 제안되었다.

소아 SPECT/CT 검사를 위한 최저조건에서의 피폭선량측정 및 팬텀의 영상평가 (Abosrbed Dose Measurements and Phantom Image Ecaluation at Minimum CT Dose for Pediatric SPECT/CT Scan)

  • 박찬록;최진욱;조성욱;김진의
    • 핵의학기술
    • /
    • 제18권1호
    • /
    • pp.82-88
    • /
    • 2014
  • SPECT/CT로 소아 복부를 검사 하는데 있어 저선량 CT 조건에 따른 흡수선량을 측정하고 SPECT와 CT 영상의 질을 평가하고, 우수한 영상의 질을 유지하면서 최저의 흡수 선량을 받을 수 있는 tube voltage (kVp)와 tube current (mA)의 설정 방향을 알아보는데 목적을 두었다. 장비는 Discovery NM/CT 670을 사용하였다. PMMA phatom을 이용하여 80, 100 kVp 10, 15, 20, 25 mA의 조건을 설정하여 중심방향과 주변방향(3, 6, 9, 12시 방향의 평균) 의 흡수선량을 측정하였고, 그에 따른 image를 SNRD로 평가 하였다. CT QA performance phantom으로 CT image의 resolution을 MTF로 나타내었고, jaszczak phantom을 hot sphere와 배후방사의 비를 $^{99}mTc$을 1:8로 주입하여 4개의 sphere에 대한 SPECT image를 CNR로 평가하였다. 선량측정에서는 주변방향의 선량이 중심방향 선량보다 평균 7% 높게 측정되었으며, SNRD는 조건에 따라 유의한 차이가 없었으며 Resolution 평가에서는 0.385 lp/mm 기준으로 100 kVp가 80 kVp보다 평균 12% 재현성이 우수하였으며, jaszczak phantom을 이용해서 CT를 기반으로 한 attenuation correction 된 SPECT image를 CNR로 평가한 결과 CT조건의 변화와 무관하게 4개의 sphere 모두 유의한 차이를 보이지 않았다. 본 연구는 SPECT/CT 검사에서 최저의 흡수선량을 유지하고 우수한 영상의 질을 획득하는데 추가적인 연구가 필요할 것으로 사료된다.

  • PDF

Power CT를 이용한 USN 센서노드용 자율독립전원 시스템 설계 (Design of Autonomous Independent Power System for USN Sensor Node Using Power CT)

  • 손원국;정재기
    • 한국정보기술학회논문지
    • /
    • 제16권12호
    • /
    • pp.101-107
    • /
    • 2018
  • 다양한 분야에 적용이 확대되고 있는 무선 센서 네트워크 기술은 센서들의 전력공급 및 전원관리 문제가 가장 큰 핵심이 되고 있다. 이러한 이유에서 새로운 개념의 전력공급장치와 전원관리장치가 요구된다. 이에 본 논문에서는 송전선에 흐르는 전류를 이용하여 전자기유도 원리에 의한 에너지 하베스팅 기술을 적용하여 별도의 외부 입력 없이 센서노드에 안정적인 전력을 공급하는 자율독립전원 시스템을 개발하였다. 제안한 자율독립전원 시스템은 Power CT를 활용한 전력공급장치와 충전회로를 포함한 전원관리장치로 구성되었다. 전원관리장치는 배터리의 충전의 안전성을 확보하기 위하여 전압제한회로, 충전전압/전류 모니터링 회로를 적용하였다. 제안된 시스템의 성능검증을 위하여 SVL진단장치에 적용하여 실험한 결과 안정적으로 운용됨을 확인할 수 있었다.