• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.6
• /
• pp.533-542
• /
• 2014

In this study TBM disc cutter prediction models including Gehring, CSM and NTNU models were investigated and the characteristics of the models were examined. The influence of penetration, uniaxial compressive strength and abrasiveness index on the models was analyzed. The life of disc cutter linearly increases with penetration per revolution and decreases with increasing uniaxial compressive strength of rocks. As the abrasiveness index, CAI, increases, the life of disc cutter in Gehring and CSM model decreases. On the contrary, the life of disc cutter life in NTNU model decreases with increasing CLI. Also, comparisons of predicted disc life were made between models using actual job site data.

• Tunnel and Underground Space
• /
• v.13 no.6
• /
• pp.413-420
• /
• 2003

Modelling for performance prediction of mechanical excavation is discussed in this paper. Two of the most successful performance prediction models, namely theoretical based CSM model and empirical based NTH model, are discussed and compared. The basic principles of rock cutting with disc cutters, especially Constant Cross Section cutters, are discussed and a theoretical model developed is introduced to provide an estimate of disc cutting forces as a function of rock properties and the cutting geometry. General modelling logic for the performance prediction of mechanical excavation is introduced. CSM computer model developed and currently used at the Earth Mechanics Institute(EMI) of the Colorado School of Mines is discussed. Example of input and output of this model is illustrated for the typical operation by Tunnel Boring Machine(TBM).

• Korean Journal of Remote Sensing
• /
• v.30 no.1
• /
• pp.75-81
• /
• 2014

Until recently, photogrammetric applications for processing the satellite images and remotely sensed data have been used in different structure of functions and interfaces for sensor modeling by each developer. Thus, a standardized utilization procedure was necessary to solve the problems, such as expandability, cost, inefficiency of sources which were resulted from different approaches. Therefore, National Geospatial Intelligence Agency (NGA) provided unified interfaces by developing Community Sensor Model (CSM) to sensor models in same way. In this study, we suggested the method of design and analyzed main functions needed modeling for the frame sensor using CSM Application Program Interface (API) provided by NGA. We also applied the designed structure to the modeling. The implemented CSM was verified by groundToImage and imageToGround. In the future, the active R&D is expected with using CSM due to the cost saving effect of software development and remarkable expandability of sensor.

• Journal of Korea Society of Industrial Information Systems
• /
• v.26 no.6
• /
• pp.97-118
• /
• 2021

This study empirically examines the effect of the psychological empowerment of airline cabin crews on customer-focused job performance attitude, service behavior by CSM, and service behavior beyond CSM. The research model and associated hypotheses were verified with the structural equation model. The findings of the study reveal that psychological empowerment has a effect on customer-focused job performance attitude and service behavior by CSM, but no effect on service behavior beyond CSM. And it is also shown that customer-focused job performance attitude has an effect on service behavior by CSM but no effect on service behavior beyond CSM. In addition, customer-focused job performance attitude shows a mediating effect between psychological empowerment and service behavior by CSM. On the other hand, it is analyzed that there is no mediating effect between psychological empowerment and service behavior beyond CSM. This study implies that the psychological empowerment and customer-focused job performance attitude of cabin crews are important at point of contact with customers to improve service quality, and psychological empowerment reinforces service behavior by CSM on the premise of customer-focused job performance attitude.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.spc
• /
• pp.64-74
• /
• 2022

The conceptual site model (CSM) is used as a key tool to support decision making in risk based management of contaminated sites. In this work, CSM was applied in Jeonju Industrial Complex where site investigation for groundwater contamination was conducted. Site background information including facility types, physical conditions, contaminants spill history, receptor exposure, and ecological information were collected and cross-checked with tabulated checklist necessary for CSM application. The CSM for contaminants migration utilized DNAPL transport model and narrative CSMs were constructed for source to receptor pathway, ecological exposure route, and contaminants fate and transport in the form of a diagram or flowchart. The component and uncertainty of preliminary CSM were reviewed using the data gap analysis while taking into account the purpose of the survey and the site management stage at the time of the survey. Through this approach, the potential utility of CSM was demonstrated in the site management process, such as assessing site conditions and planning follow-up survey work.

• Journal of Soil and Groundwater Environment
• /
• v.28 no.2
• /
• pp.12-29
• /
• 2023

Conceptual site model (CSM) development and enhancement for contaminated sites assists in identifying data gaps during the site investigation process. In this study, CSM was developed and enhanced for a contaminated site in Korea as a case study. Site Y was scrutinized four times previously. The site profiles for each scrutiny were reorganized based on the scrutiny reports, and the relevant data was utilized to develop and enhance CSMs. CSM for the first investigation was developed in various forms including table, flowchart, diagram, and narrative formats. CSM was enhanced in a stepwise manner by incorporating the updated profile information obtained in next investigation to existing CSM. The hypothetical data gap analysis between each investigation step was established to meet the purpose of the follow-up investigation. This case study showed that CSM is a useful tool to identify the history and current status of contaminated sites and thereby help in planning supplementary investigations for better site characterization.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.611-621
• /
• 2009

This paper first reviews the physical meanings and the expressions of two representative strain rate models: CSM (Cowper-Symonds Model) and JCM (Johnson-Cook Model). Since it is known that the CSM and the JCM are suitable for low-intermediate and intermediate-high rate ranges, many studies regarding marine accidents such as ship collision/grounding and explosion in FPSO have employed the CSM. A formula to predict the material constant of the CSM is introduced from literature survey. Numerical simulations with two different material constitutive equations, classical metal plasticity model based on von Mises yield function and micromechanical porous plasticity model based on Gurson yield function, have been carried out for the stiffened plates under impact loading. Simulation results coincide with experimental results better when using the porous plasticity model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.8
• /
• pp.732-744
• /
• 1991

In this paper, performance evaluation of the common channel signalling module which performs the message transfer part function of the CCITT No.7 in TDX 1 exchange is carried out. Simulation model is developed using SLAM II network nodes according to signalling mode and transrated into SLAM II statement, . The simulation results are compared with experimental results and analyzed in order to get the maximum throughput, processing delay time, bottleneck eiement. Also, in order to get the optimized structure of the CSM, simulation is performed on the vanous case, namely, change of the number of STB, change of STG bus or B bus speed, change of CSIOB, processing speed, change of the number of transfered message per one poll.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1091-1104
• /
• 2018

Wear prediction of TBM disc cutters is a very important issue during design as well as construction stages for hard rock TBMs as the cutter head intervention is directly related to the time and cost of tunneling. For that, some methods such as NTNU, CSM and Gehring models were used to predict disc cutter wear and intervention interval. There are however some problems to be addressed in these models in terms of accuracy and time for testing, so that a NAT (New Abrasion Tester) model has been developed in order to achieve simplicity and reliability together at the same time (Farrokh and Kim, 2018). On the basis, the proposed NAT model has been applied to ${\bigcirc}{\bigcirc}$ project in Korea. A comparative study was performed to compare with the conventional methods and as a result the NAT model showed a very good agreement with actual cutter life. The NAT model will be further applied to other projects to establish credibility.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.383-399
• /
• 2020

Optimizing the spacing of the disc cutter is a key element in the design of the TBM cutter head, which determines the drilling performance of the TBM. The full-scale linear cutting test is known as the most reliable and accurate test for calculating the spacing of the disc cutter, but it has the disadvantage of costly and time-consuming for the full-scale experiment. In this study, through the numerical analysis study based on the discrete element method, the tendency between Specific Energy-S/P ratio according to uniaxial compression strength and penetration depth of rock was analyzed, and the optimum spacing of 17-inch disc cutter was derived. To examine the appropriateness of the numerical analysis model, the rolling force acting on the disc cutter was compared and reviewed with the CSM model. As a result of numerical analysis for the linear cutting test, the rolling force acting on the disc cutter was analyzed to be similar to the rolling force derived from the theoretical formula of the CSM model. From the numerical analysis on 5 UCS cases (50 MPa, 70 MPa, 100 MPa, 150 MPa, 200 MPa), it is found that the range of the optimum spacing of the disc cutter decreases as the rock strength increases. And it can be concluded that 80~100 mm of disc cutter spacing is the optimum range having minimum specific energy regardless of rock strength. This tends to coincide with the optimal spacing of previously reported disk cutters, which underpins the disk cutter spacing calculated through this study.