• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.5
• /
• pp.723-731
• /
• 2013

This study provides a comparative analysis of the effects of pre-slaughter penetrative and non-penetrative stunning and post-slaughter stunning on meat quality attributes in longissimus lumborum (LL) and semitendinosus (ST) muscles in heifers. Ten animals were assigned to each of four treatment groups: i) animals were subjected to conventional Halal slaughter (a clean incision through the structures at the front of the upper neck - the trachea, oesophagus, carotid arteries and jugular veins) and post-cut penetrating mechanical stun within 10 to 20 s of the neck cut (Unstunned; US); ii) high power non-penetrating mechanical stunning followed by the neck cut (HPNP); iii) low power non-penetrating mechanical stunning followed by the neck cut (LPNP); and iv) penetrative stunning using a captive bolt pistol followed by the neck cut (P). For each carcass, muscle samples were removed within 45 min of slaughter, portioned and analysed for pH, cooking loss, water holding capacity (WHC), tenderness (WBS), lipid oxidation (TBARS) and color, over a two week storage period. Stunning did not affect pH and cooking loss. Significant differences in water holding capacity, tenderness, lipid oxidation and color were present at different storage time points. HPNP stunning resulted in lower WHC and color values, particularly lightness ($L^*$), higher TBARS values and peak force values compared with those stunned using LPNP, P and US. These adverse effects on quality were mostly encountered in the ST muscle. In conclusion, the meat quality achieved using P, LPNP and US treatments was comparable, and no treatment stood out as considerably better than another.

• Journal of Korea Water Resources Association
• /
• v.47 no.2
• /
• pp.135-143
• /
• 2014

In this study, Chungju inflow was simulated for climate change considering the uncertainties of GCMs and a stochastic model. TFN (Transfer Function Noise) model and 4 different GCMs (CNRM, CSIRO, CONS, UKMO) based on IPCC AR4 A2 scenario were used. In order to evaluate uncertainty of TFN model, 100 cases of noises are applied to the TFN model. Thus, 400 cases of inflow results are simulated. Future inflows according to the GCMs show different rates of changes for the future 3 periods relative to the past 30-years reference period. As the results, the summer inflow shows increasing trend and the spring inflow shows decreasing trend based on AR4 A2 scenario.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.479-488
• /
• 2016

PURPOSE. The aim of this study was to test the modulus of elasticity (E) across the interfaces of yttria stabilized zirconia (YTZP) / veneer multilayers using nanoindentation. MATERIALS AND METHODS. YTZP core material (KaVo-Everest, Germany) specimens were either coated with a liner (IPS e.max ZirLiner, Ivoclar-Vivadent) (Type-1) or left as-sintered (Type-2) and subsequently veneered with a pressable glass-ceramic (IPS e.max ZirPress, Ivoclar-Vivadent). A $5{\mu}m$ (nominal tip diameter) spherical indenter was used with a UMIS CSIRO 2000 (ASI, Canberra, Australia) nanoindenter system to test E across the exposed and polished interfaces of both specimen types. The multiple point load - partial unload method was used for E determination. All materials used were characterized using Scanning Electron Microscopy (SEM) and X - ray powder diffraction (XRD). E mappings of the areas tested were produced from the nanoindentation data. RESULTS. A significantly (P<.05) lower E value between Type-1 and Type-2 specimens at a distance of $40{\mu}m$ in the veneer material was associated with the liner. XRD and SEM characterization of the zirconia sample showed a fine grained bulk tetragonal phase. IPS e-max ZirPress and IPS e-max ZirLiner materials were characterized as amorphous. CONCLUSION. The liner between the YTZP core and the heat pressed veneer may act as a weak link in this dental multilayer due to its significantly (P<.05) lower E. The present study has shown nanoindentation using spherical indentation and the multiple point load - partial unload method to be reliable predictors of E and useful evaluation tools for layered dental ceramic interfaces.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.18-26
• /
• 2009

When channel state information (CSI) is available at the transmitter, the system throughput can be enhanced by adaptive transmissions and opportunistic multiuser scheduling. In this paper, we consider multiple-input multiple-output (MIMO) systems employing bit-interleaved coded orthogonal frequency division multiplexing (BIC-OFDM). We first propose a bit-loading algorithm based on the Levin-Campello algorithm for the BIC-OFDM. Then we will apply this algorithm to the MIMO system with a finite set of constellations, by reassigning residual power on each stream Simulation results show that proposed bit-loading scheme which takes the residual power into account improves the system performance especially at high signal-to-noise ratio (SNR) range.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.804-804
• /
• 2012

기후변화는 범지구적으로 당면한 과제로서 국제적으로도 이에 대한 저감 완화대책 수립 및 시행에 힘쓰고 있다. 이러한 세계적 관심에 따라 최근 우리나라도 국가 물 안보에 대한 보고서 등의 개정에 관심을 기울이고 있는 실정이다. 그러나 이러한 당면한 문제에 대한 계획을 수립하기 위해서는 무엇보다도 직면하고 있는 사실에 대한 이해가 필요하다. 특히 우리나라의 경우에는 비록 국토가 좁은 나라에 속하지만 호우의 계절적 지역적 편차가 큰 편이기 때문에 무엇보다 지역별 변화에 대한 연구가 필요한 실정이다. 지금까지의 수문학 분야의 기후변화에 대한 영향 연구는 대부분 유역을 중심으로 수행되어 왔다. 이는 자연현상을 모의하기 위해서이나 실제적으로 국가예산 계획수립 및 투입은 주로 지자체단위로 이루어지기 때문에 지자체별 영향에 대한 연구도 매우 중요하다. 따라서 본 연구에서의 지역적 범위는 지자체단위로 하였다. 이러한 지역별 분석의 범위는 최소 단위의 의사결정자들을 위한 범주가 되면 이상적이겠지만 실제적으로 이는 여러 가지 이유로 어려운 점이 있기 때문에 본 연구에서는 우리나라의 광역지자체를 공간적 범위로 설정하였다. 또한 기후변화 시나리오는 IPCC(Intergovernmental Panel on Climate Change) 4차 보고서의 탄소배출 시나리오 중 널리 사용되고 있는 3종(A1B, A2, B1) 선정하였으며, GCM은 4종(CNRM: CM3, CSIRO: MK3, CONS: ECHO-G, UKMO: HADCM3)을 적용하였다. 최종적으로 각 광역자 치단체별-시나리오별-GCM 별로 4개의 기간 구간 (2080-2009, 2010-2039, 2040-2069, 2070-2099)으로 나누어 평균 일최대강우량 및 연총강우량의 변화를 분석하였으며, 이러한 분석법은 일본 국토교통성의 경우 이러한 방법에 일최대강우량에 적용하여 미래 기후변화로 인하여 치수안전도 변화 분석에 활용한 바 있다.

• Animal Systematics, Evolution and Diversity
• /
• v.19 no.1
• /
• pp.139-147
• /
• 2003

Burckhardt (1987) combined Aphalaridae and Spondyliaspididae into the Psyllidae, as there were no character sets which had clearly defined these three families. During the analysis on the character evolution of the psyllids from the world including Australia, there were a few different results for the taxonomy of the Spondyliaspidinae. 52 species and 28 genera in the Australian native psyllids were dissected to examine the taxonomic position of the subfamily Spondyliaspidinae. All of the dissected psyllids in the subfamily Spondyliaspidinae had one follicle in the male testes, but the subfamilies of the Psyllidae except Spondyliaspidinae were having two or more follicles. By the characteristics with living on the Eucalyptus host plants recently evolved, having just one follicle which clearly defined it from other families and experienced an explosive specific diversification in the Gondwana region, it is reasonable to separate the subfamily Spondyliaspidinae from the family Psyllidae with two or more follicles.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.66-81
• /
• 2011

In this study, it was aimed to develop a thermal-hydraulic-mechanical coupled fracture mechanics code that models a fracture initiation, propagation and failure of underground rock mass due to thermal and hydraulic loadings. The development was based on a 2D FRACOD (Shen & Stephasson, 1993), and newly developed T-M and H-M coupled analysis modules were implemented into it. T-M coupling in FRACOD employed a fictitious heat source and time-marching method, and explicit iteration method was used in H-M coupling. The validity of developed coupled modules was verified by the comparison with the analytical result, and its applicability to the fracture initiation and propagation behavior due to temperature changes and hydraulic fracturing was confirmed by test simulations.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.112-117
• /
• 2005

Geophysical logging is routinely undertaken as part of most coal mine exploration programs. Currently, the main application for the logs is to determine coal seam depth and to qualitatively estimate coal quality, lithology, and rock strength. However, further information can be obtained, if quantitative log interpretation is made. To assist in the uptake of quantitative interpretation, we discuss log responses in terms of the mineralogy of the clastic sedimentary rocks frequently found in the Australian black coal mining areas of the Sydney and Bowen Basins. We find that the log responses can be tied to the mineralogy with reasonable confidence. Ambiguities in the interpretation will be better resolved if a full suite of logs is run. A method for checking for internal consistency, by comparing calculated and observed velocities, is also described. A key driver for quantitative interpretation is geotechnical characterisation. We propose a classification system for clastic rocks that takes into consideration physical rock properties that can be inferred from geophysical logs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.306-306
• /
• 2019

전지구적 기온상승으로 인해 미래기후의 관한 연구가 중요시 되고 있다. 위와 같은 현상으로 인하여 다양한 기후변화 연구가 진행되고 있다. 미래기후 연구에는 GCM (General Circulation Model) 모의 결과가 이용된다. 격자 자료로 구성된 GCM은 연구 지점으로 지역적 상세화와 연구지역의 관측자료 사이의 편이 보정(bias correction)이 필수적이다. 위와 같은 근거로 편이 보정 방법의 선택은 매우 중요하며 편의 보정의 방법에 따라서 결과가 다르게 도출될 수 있다. 또한 국내외 연구에서는 다양한 상세화 기법과 편이 보정 기법을 분석 및 평가하는 연구가 진행되고 있으며, 편의 기법 중 대표적인 기법인 Quantile mapping과 Random Forest 기법이 있다. Quantile mapping 기법은 GCM의 과거 모의 데이터와의 편이 보정에 있어서 우수하게 나타났으나, GCM 데이터의 미래 예측 기간(2010년~2018년)까지의 데이터에서는 극한 강수를 정량적으로 분석 가능한 Random Forest 기법이 편이 보정 과정에서 성능이 우수할 것으로 판단된다. 본 연구에서는 우리나라 21개 관측소를 기준으로 총 4개의 GCM(GISS, CSIRO, CCSM4,MIROC5)의 과거 기간 자료(1970년~2005년)를 실제 관측소에서 관측된 강수량을 편의 보정하는 방법에 있어서 편의 보정 기법의 성능을 비교한 결과와 GCM 미래 예측 기간 자료(2010년~2018년)에서의 편의 보정 기법의 성능 결과를 비교하였다. 이를 토대로 편이 보정 기법의 결과를 6개의 평가지수를 이용하여 정량적으로 분석하였으며, 다기준의사결정기법인 TOPSIS(Technique for Order of Preference by Similarity to Ideal Solution)를 이용하여 편이 보정기법들의 성능에 있어서 우선순위를 선정하였다. 본 연구에서 편이 보정 방법으로 Quantile mapping 방법을 사용했으며, Quantile mapping의 기법으로는 비모수 변환법(non-parametric transformation)과 분포기반 변환법(distribution derived transformation)이 사용되었다. 또한 머신러닝 방법 중 하나인 Random Forest 방법을 동시에 사용하여 결과를 비교하였다. 또한 GCM 자료가 격자식으로 제공하고 있기 때문에 관측소 강수량도 공간적으로 환산하여야 하는데, 본 연구에서는 역거리 가중치법(inverse distance weighting, IDW) 방법을 이용하였다.

• Structural Engineering and Mechanics
• /
• v.81 no.3
• /
• pp.293-303
• /
• 2022

As infrastructure ages and traffic load increases, serious public concerns have arisen for the well-being of bridges. The current health monitoring practice focuses on large-scale bridges rather than short span bridges. However, it is critical that more attention should be given to these behind-the-scene bridges. The relevant information about the construction methods and as-built properties are most likely missing. Additionally, since the condition of a bridge has unavoidably changed during service, due to weathering and deterioration, the material properties and boundary conditions would also have changed since its construction. Therefore, it is not appropriate to continue using the design values of the bridge parameters when undertaking any analysis to evaluate bridge performance. It is imperative to update the model, using finite element (FE) analysis to reflect the current structural condition. In this study, a FE model is established to simulate a concrete culvert bridge in New South Wales, Australia. That model, however, contains a number of parameter uncertainties that would compromise the accuracy of analytical results. The model is therefore updated with a neural network (NN) optimisation algorithm incorporating Monte Carlo (MC) simulation to minimise the uncertainties in parameters. The modal frequency and strain responses produced by the updated FE model are compared with the frequency and strain values on-site measured by sensors. The outcome indicates that the NN model updating incorporating MC simulation is a feasible and robust optimisation method for updating numerical models so as to minimise the difference between numerical models and their real-world counterparts.