• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.83-90
• /
• 2017

To launch the product recently attached to IoT consumer electronics, smart phones and healthcare products around the large companies is a trend that is growing interest in the IoT. However, the country's small business environment is what the environmental improvement process that is easily accessible to the small business environment because the IoT technologies are difficult to apply the IoT technologies than any other country environment than desperate situation. In this paper, we propose a service operating model to improve production efficiency when the fusion manufacturing process is currently operating in the country SMEs and IoT technology. Proposed model using the manufacturing product information and sensor / dabayiseu information in the entire manufacturing process has as its object to utilize the IoT technology. Performance evaluation, the proposed model is more efficient than the previous model and 23.1% of the manufacturing process. In addition, it is increasing the manufacturing process was reduced by 17.3%, the average processing time as compared to the previous model. Finally, the personnel cost to be used in the manufacturing process was found to be an average decrease of 19.8% than previous model.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.14-20
• /
• 2021

Most accidents caused by road icing in winter lead to major accidents. Because it is difficult for the driver to detect the road icing in advance. In this work, we study how to accurately detect road traffic emerging risk using AutoML and CNN's ensemble model that use both structured and unstructured data. We train CNN-based road traffic emerging risk classification model using images that are unstructured data and AutoML-based road traffic emerging risk classification model using weather data that is structured data, respectively. After that the ensemble model is designed to complement the CNN-based classification model by inputting probability values derived from of each models. Through this, improves road traffic emerging risk classification performance and alerts drivers more accurately and quickly to enable safe driving.

• Journal of Radiation Protection and Research
• /
• v.28 no.4
• /
• pp.299-309
• /
• 2003

In an accidental release of radioactive materials to the environment the contaminative influence of animal products due to the inhalation of air and the ingestion of soil of livestock, both of which are dealt with as minor contaminative pathways in most radioecological models but may not be neglected, was investigated with the improvement of the Korean dynamic food chain model DYNACON Although mathematical models for both contaminative pathways have been established for considering all animal products and incorporated into the model, investigation was limited to milk. As a result, it was found that both pathways are influential in the contamination of milk in the case of an accidental release during the non-grazing period of dairy cows. In the case of an accidental release during the non-grazing period, the inhalation of air was more influential than the ingestion of soil in the early days following an accidental release. While, it was the opposite with the lapse of time. If precipitation is encountered during an accidental release, contaminative influence due to the ingestion of soil was greater compared with the cases of no precipitation, in general, because of a stealer deposition of radionuclides onto the ground. Precipitation during an accidental release was a less influential factor in $^{131}I$ (elemental iodine) contamination compared with the $^{137}Cs\;and\;^{90}Sr$ contaminations. In the case of an accidental release during the grazing period of dairy cows, the contaminative influence due to the inhalation of air was negligible.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.73-80
• /
• 2016

Multiplayer Online Games(MOG) using the Internet are typically organized based on a CS(client-server) or P2P(peer-to-peer) architecture. We then propose a method that combines a P2P architecture with a CS architecture in order to utilize their advantages. Most MOGs use a primary-copy replication approach that provides strong consistency control over an object. For each object and character there exists an authoritative copy, called primary copy and all other copies are secondary copies or replicas. Any update to the object has to be first performed on the primary copy. In the proposed hybrid architecture, primary copies may reside on the server or be held by clients. In this architecture, load balancing between a server and clients can be achieved by reducing the number of objects maintained by the server. Games consist of various types of actions with different consistency requirements. A multi-level approach to game consistency is sensible as it provides the best trade-off between consistency and performance. The performance for the hybrid game architecture with the primary-copy model is evaluated through simulation experiments and analysis in this paper.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.69-69
• /
• 2003

Flat panel based digital radiography (DR) systems have recently become useful and important in the field of diagnostic radiology. For DRs with amorphous silicon photosensors, CsI(TI) is normally used as the scintillator, which produces visible light corresponding to the absorbed energy. The visible light photons are converted into an electric signal in the amorphous silicon photodiode. In order to produce good quality images, we need to understand the detailed behavior of DR detectors in radiation. We, therefore, investigated the relationship between DR outputs and X -ray in terms of absorbed energy, using the SPEC-78, X-ray energy spectrum model. We calculated the total filtration of X-ray equipment measuring air exposure and this value was used in the calculation of absorbed energy. The relationship between DR output and the absorbed energy of the X-ray was obtained by matching the absorbed energy with pixel values of real images under various conditions. It was found that the relationship between these two values was almost linear. The results were verified using phantoms made of water and aluminium. The pixel value of the phantom image was estimated and compared with previous results under various conditions. The estimated pixel value coincided with the results, although the effect of scattered photons introduced some errors.

• Journal of Radiation Protection and Research
• /
• v.41 no.2
• /
• pp.179-183
• /
• 2016

Background: As an important detecting device, TLD is a widely used in the radiation monitoring. It is essential for us to study the property of detecting element. The aim of this study is to calculate the thermo-luminescence efficiency of TL elements. Materials and Methods: A batch of thermo-luminescence elements were irradiated by the filtered X-ray beams of average energies in the range 40-200 kVp, 662 keV $^{137}Cs$ gamma rays and then the amounts of lights were measured by the TL reader. The deposition energies in elements were calculated by theory formula and Monte Carlo simulation. The unit absorbed dose in elements by photons with different energies corresponding to the amounts of lights was calculated, which is called the thermo luminescent efficiency (${\eta}^{(E)}$). Because of the amounts of lights can be calculated by the absorbed dose in elements multiply ${\eta}^{(E)}$, the ${\eta}^{(E)}$ can be calculated by the experimental data (the amounts of lights) divided by absorbed dose. Results and Discussion: The deviation of simulation results compared with theoretical calculation results were less than 5%, so the absorbed dose in elements was calculated by simulation results in here. The change range of ${\eta}^{(E)}$ value, relative to 662 keV $^{137}Cs$ gamma rays, is about 30% in the energy range of 33 keV to 662 keV, is in accordance by the comparison with relevant foreign literatures. Conclusion: The ${\eta}^{(E)}$ values can be used for updating the amounts of lights that are got by the direct ratio assumed relations with deposition energy in TL elements, which can largely reduce the error of calculation results of the amounts of lights. These data can be used for the design of individual dosimeter which used TLD-2000 thermo-luminescence elements, also have a certain reference value for manufacturer to improve the energy-response performance of TL elements by formulation adjustment.

• Biomedical Science Letters
• /
• v.12 no.3
• /
• pp.281-287
• /
• 2006

Cigarette smoke causes atypical structure of pulmonary and oxidative damage. Therefore, we carried out to determine if exposure to cigarette smoke alters pulmonary structure and anti-oxidant related enzyme in a animal model, when natural product extracts using by Nebulizer. The rat were divided into four groups: $H_2O-treated$ (Control), natural product (Camellia sinensis) extracts-treated (CS), natural product extracts-treated with cigarette smoke-exposed (CS+SM) and cigarette smoke-expose (SM). All groups are similar to Control group in weight, but SM group is lower than the other groups. Microscopic image of the pulmonary structure in SM group showed deleterious alterations in the morphology, but the other groups are maintained in normal structure. In anti-oxidant related enzymes, SOD (superoxide dismutase) and catalase, SM group represents the lowest enzyme activity among all groups. But G6PD (glucose-6-phosphate dehydrogenase) and LPO (lipid peroxidation) is SM group represents the highest enzyme activity among all groups. These result indicate that the natural product extracts is an efficient tissue protective substance against smoke-induced lung injury.

• Journal of Digital Contents Society
• /
• v.11 no.1
• /
• pp.47-55
• /
• 2010

Cultural Content Industry, a core industry based on knowledge, is becoming an economic model making new benefits by adding human creativity, imagination, sensitivity and style in to information technology. Cultural Contents Industry representing cultures of each countries is facing major changes towards a new competitive industry of each nation. Cultural content of a country is upbringing new contents power developing into a new industry by flattening the barriers within nations. But cooperations face difficulties in launching the industry because of limited information about the current market and lack of understanding in cultural differences. In order to solve this problem, this paper aims to create global network leading to increase of export and creation of new market with cultural contents and train local specialists. In order to search for the ways to maintain Korean contents in other nations and expand exportation. cooperations invite leading cultural contents groups to South Korea, let the groups experience Korea's contents. Cooperations initiated invite training, dispatch training by Korean companies and international students training. The purpose of this paper is to support education system, ETS-CS(Educational Training System for Contents Specialist) and analyse practices applied in the field to develop a better cultural contents industry.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.1
• /
• pp.9-13
• /
• 2014

Effects of neutron irradiation on the superconducting properties of the undoped $MgB_2$ and the carbon(C)-doped $MgB_2$ bulk superconductors, prepared by an in situ reaction process using Mg and B powder, were investigated. The prepared $MgB_2$ samples were neutron-irradiated at the neutron fluence of $10^{16}-10^{18}n/cm^2$ in a Hanaro nuclear reactor of KAERI involving both fast and thermal neutron. The magnetic moment-temperature (M-T) and magnetization-magnetic field (M-H) curves before/after irradiation were obtained using magnetic property measurement system (MPMS). The superconducting critical temperature ($T_c$) and transition width were estimated from the M-T curves and critical current density ($J_c$) was estimated from the M-H curves using a Bean's critical model. The $T_cs$ of the undoped $MgB_2$ and C-doped $MgB_2$ before irradiation were 36.9-37.0 K and 36.6-36.8 K, respectively. The $T_cs$ decreased to 33.2 K and 31.6 K, respectively after irradiation at neutron fluence of $7.16{\times}10^{17}n/cm^2$, and decreased to 22.6 K and 24.0 K, respectively, at $3.13{\times}10^{18}n/cm^2$. The $J_c$ cross-over was observed at the high magnetic field of 5.2 T for the undoped $MgB_2$ irradiated at $7.16{\times}10^{17}n/cm^2$. The $T_c$ and $J_c$ variation after the neutron irradiation at various neutron fluences were explained in terms of the defect formation in the superconducting matrix by neutron irradiation.

• Journal of Digital Contents Society
• /
• v.9 no.3
• /
• pp.471-481
• /
• 2008

Test scheduling considering power dissipation is an effective technique to reduce the testing time of complex SoCs and to enhance fault coverage under limitation of allowed maximum power dissipation. In this paper, a modeling technique of test resources and a test scheduling algorithm for efficient test procedures are proposed and confirmed. For test resources modeling, two methods are described. One is to use the maximum point and next maximum point of power dissipation in test resources, the other one is to model test resources by partitioning of them. A novel heuristic test scheduling algorithm, using the extended-tree-growing-graph for generation of maximum embedded cores usable simultaneously by using relations between test resources and cores and power-dissipation-changing-graph for power optimization, is presented and compared with conventional algorithms to verify its efficiency.