• 제목/요약/키워드: CR39

검색결과 425건 처리시간 0.025초

항생제 대체제로서 Dicarboxylic Acid 급여가 in vitro 반추위 발효성상, 착유우의 유량 및 유성분에 미치는 영향 (Effects of Dicarboxylic Acid as an Alternative to Antibiotic on in vitro Rumen Parameters, Milk yield and Milk Compositions in Lactating Cows)

  • 남인식;안용대;정기환;안종호
    • 한국유기농업학회지
    • /
    • 제24권3호
    • /
    • pp.453-463
    • /
    • 2016
  • 본 연구는 항생제 대체제로서 Dicarboxylic acid가 in vitro 반추위 발효성상, 착유우의 유량 및 유성분에 미치는 영향을 조사하기 위한 목적으로 실시하였다. 반추위 발효성상을 조사하기 위하여 batch culture 방법을 이용하였으며, Dicarboxylic acid의 급여가 착유우의 유량 및 유성분에 미치는 영향을 조사하기 위하여 평균체중 $649{\pm}19 kg$으로 일일 산유량 $38{\pm}3.95kg$, 유지방 $3.22{\pm}0.23%$, 산 차 $2.5{\pm}1.43$차인 홀스타인 착유우 10두를 산 차 및 산유량 등을 고려하여 시험사료에 따른 2개 군(대조구 5두, Dicarboxylic acid 급여구 5두)으로 나누어 실험을 실시하였다. Dicarboxylic acid는 사료급여량의 2%를 첨가하여 1일 2회 오전과 오후 착유 시 급여하였다. Dicarboxylic acid는 반추위내 pH에 긍정적인 영향을 주어 건물소화율이 유의적으로 증가하였다. 따라서 Dicarboxylic acid는 반추위 발효환경에 긍정적인 영향을 미치는 것으로 판단된다. 건물소화율은 Dicarboxylic acid를 단독 급여할 때 가장 높았다. 또한 Dicarboxylic acid를 추가 급여하면 반추위 내 총 VFA 함량이 증가하는 경향을 나타내었다. Acetic acid 농도는 Dicarboxylic acid 단독 처리구에서 높게 생성되는 경향을 나타내었다. 착유우의 유량은 Dicarboxylic acid를 급여한 처리구에서 대조구 대비 약 14%의 유량이 증가하였다. Dicarboxylic acid는 유성분 및 MUN에는 영향을 미치지 않는 것으로 판단된다. 따라서 항생제 대체제로서 Dicarboxylic acid 첨가는 반추위 내 발효환경을 안정화하여 건물소화율을 향상시키고 착유우의 유량을 높일 수 있을 것으로 판단된다.

Heavy Metal Concentrations in the Mollusc Gastropod, Cipangopaludina chinensis malleata from Upo Wetland Reflect the Level of Heavy Metals in the Sediments

  • Kim, Heung-Tae;Kim, Jae-Geun
    • Journal of Ecology and Environment
    • /
    • 제29권5호
    • /
    • pp.453-460
    • /
    • 2006
  • Upo wetland is the largest inland wetland in Korea as Ramsar Convention Area. The purposes of the study were to investigate the levels of heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) in the sediment and Cipangopaludina chinensis malleata from three sites of the wetland and to assess the potential of the gastropod as a bioindicator for heavy metal levels. The gastropods were dissected into shell and soft tissue without the digestive and excretive organs. The levels of Cd, Cu and Pb were below the guideline of Soil Environment Conservation Act and the heavy metals except Cr were slightly different among the sites. Cd was higher in Upo site ($0.32{\mu}g/g$) than Sajipo site ($0.28{\mu}g/g$). Cu and Zn showed the highest value in Sajipo as $43.5{\mu}g/g\;and\;39.8{\mu}g/g$, respectively while the concentrations of Pb and Zn were the highest in Upstream as $58.8{\mu}g/g\;and\;138{\mu}g/g$, respectively. In the soft tissues and shells of the gastropod, the overall common trend in the concentrations of the heavy metals was revealed with the following order: Zn > Cu > Cr > Ni > Pb > Cd and Ni > Zn > Cr > Cu > Pb > Cd, respectively. Although the soft tissues exhibited higher concentrations of the heavy metals except Ni than the shell in the gastropod, the levels of Cd and Pb in the gastropod were generally below the restrictive values set up by Korea Food & Drug Administration. From Duncan's Multiple Range Test (DMRT) results, the concentrations of Pb and Zn in the sediments among the sites were reflected on the soft tissue (Pb) and the shell (Pb and Zn) of the gastropod in the same order. The lower value of coefficient of variation (CV) in Pb concentration of the shell than in that of the soft tissue supports the usefulness of the shell as a bioindicator for Pb pollution. Although the CV value in the shell was a little higher than in the soft tissue, DMRT results and the stability of incorporated Zn into the shell support the use of the shell of the gastropod as a potential bioindicator for long-term contamination of Zn.

전북 진안지역 강우의 화학성분 조성 및 천연공급량 (Composition of Chemical Components and Amount of Natural Supplies by Precipitation in Chinan Area of Chonbuk Province)

  • 한강완;조재영;손재권
    • 한국환경농학회지
    • /
    • 제17권4호
    • /
    • pp.291-295
    • /
    • 1998
  • 공업단지에서 배출되는 대기오염물질이 확산작용에 의해 농업지대에 내리는 강우에 영향을 미치는지를 조사하기 위하여 1997년 5월 1일부터 1998년 4월 30일까지 비오염지로 예상되는 전라북도 진안군 마령면 수도작 농업지대에 내리는 강우중 화학성분의 함량변화와 천연공급량을 조사한 결과는 다음과 같다. 강우pH는 $6.44{\sim}7.24$, EC는 $14.23{\sim}30.67{\mu}S/cm$의 범위를 나타내었다. 전질소의 함량은 $1.43{\sim}10.14㎎/L$, 암모니아태질소는 $0.57{\sim}4.39㎎/L$, 질산태질소는 $0.18{\sim}1.69㎎/L$의 범위를 나타내었다. 전인산은 $0.015{\sim}0.087㎎/L$의 범위를 나타내었으며, 가용성인산은 검출되지 않았다. 부유물질은 $3.6{\sim}15.3㎎/L$, $Ca^{++}$$0.37{\sim}1.66㎎/L$, $Mg^{++}$$0.17{\sim}0.52㎎/L$, $Na^+$$0.015{\sim}0.087㎎/L$ 그리고 $K^+$$0.17{\sim}0.58㎎/L$의 범위를 나타내었다. 조사대상 중금속중 중금속중 Cd, Pb, Ni, Cr은 검출되지 않았으며, Zn의 경우 $0.009{\sim}0.098㎎/L$, Cu의 경우 불검출${\sim}0.019㎎/L$의 범위를 나타내었는데 그 함량이 아주 낮은 수준이었다. 음이온성분 가운데 $Cl^-$$1.02{\sim}7.24㎎/L$, $SO_4^{2-}$$3.73{\sim}14.47㎎/L$, 의 범위를 나타내었다. 각종 화학성분의 천연공급량은 전질소 39.48㎏/㏊/yr, 암모니아태질소 21.82㎏/㏊/yr, 질산태질소 6.90㎏/㏊/yr, 전인산 0.68㎏/㏊/yr로 공급되었다. 양이온성분의 공급량은 각각 $Ca^{++}$ 4.46㎏/㏊/yr, $Mg^{++}$ 5.00㎏/㏊/yr, $Na^+$ 7.26㎏/㏊/yr, $K^+$ 5.46㎏/㏊/yr로 나타났다. 중금속물질 가운데 Pb, Cd, Ni와 Cr은 검출되지 않았으며, Cu와 Zn의 공급량은 각각 0.024㎏/㏊/yr, 0.44㎏/㏊/yr로 나타났다. 음이온성분중 $Cl^-$는 31.16㎏/㏊/yr, $SO_4^{2-}$ 98.76㎏/㏊/yr로 나타났다.

  • PDF

단일 절삭가공용 왁스 디스크 내에서 순차적 절삭가공 순서에 따른 크라운의 내면 및 변연 적합도 비교 (Comparison of internal and marginal fit of crown according to milling order in a single machinable wax disc)

  • 송준범;이종혁;하승룡;최유성
    • 대한치과보철학회지
    • /
    • 제59권4호
    • /
    • pp.395-404
    • /
    • 2021
  • 목적: 본 연구의 목적은 절삭가공이 순차적으로 진행됨에 따른 왁스 디스크의 구조적 안정성의 변화가 보철물의 적합도에 미치는 영향을 평가하는 것이다. 재료 및 방법: 삭제된 상악 제1대구치 인공치아를 이용하여 Ni-Cr 합금 표준모형을 제작하였고, 이를 스캔하여 크라운을 디자인한 뒤 왁스 디스크를 절삭가공하고 매몰 및 Ni-Cr 합금으로 주조하여 보철물을 제작하였다. 단일 왁스 디스크 내에서 중앙에 일렬로 위치한 납형들은 가장 처음 절삭가공 되는 WM1군부터 마지막에 절삭가공 되는 WM5군으로 총 5개의 군을 설정하였고 각 군의 수는 10개로 하였다. 적합도는 실리콘 레플리카 방법을 이용하여 변연 간극, 축면 간극, 선각간극, 교합면 간극을 측정하였다. 측정값은 일원배치분산분석(one-way ANOVA)을 사용하여 유의 수준은 95%로 그룹 간의 차이를 평가한 뒤, 사후 분석을 위해 Tukey HSD test를 시행하였다(α = .05). 결과: 각 군의 변연 간극은 WM1군(40.41 ± 2.15 ㎛), WM2군(40.44 ± 2.23 ㎛), WM3군(39.96 ± 2.25 ㎛), WM4군(39.96 ± 2.48 ㎛), WM5군(40.57 ± 2.53 ㎛)으로 각 군간에 유의한 차이를 보이지 않았다. 축면 간극, 선각 간극, 교합면 간극에서도 각 군간에 유의한 차이를 보이지 않았다. 결론: 단일 절삭가공용 왁스 디스크 내에서 순차적 절삭가공 시 크라운의 내면 및 변연 적합도는 절삭 순서에 영향 받지 않는 것으로 보인다.

가스터빈 고온부품의 재생 접합을 위한 손상부 파악 (The Consideration of the Damage in Gas Turbine Hot Parts for Repair Bonding Process)

  • 김성욱;최철;김재철;이창희
    • 동력기계공학회지
    • /
    • 제7권2호
    • /
    • pp.73-79
    • /
    • 2003
  • The present study was aimed at analysing the damage of a used gas turbine bucket after 39,500h of total service. Microstructures and cracks of service-induced bucket were observed. The crack might have initiated from the coating in the bucket surface by thermal fatigue and propagated into the GTD111 base metal. Maximum depth of penetration was 2.7 mm(full penetration) at the leading edge. Crack contains a lot of Cr-,Ti-,Al-oxide which will prohibit filling and wetting of insert metal. Depth and propagation direction of crack were accorded with centrifugal force and temperature distribution in turbine bucket. Present result will provide basic data for repair bonding process.

  • PDF

소태아혈청과 이의 대체물질인 BSA, PVA가 복제수정란의 발달에 미치는 영향

  • 이상기;김동훈;양병철;임기순;박수봉;장원경;이훈택
    • 한국동물번식학회:학술대회논문집
    • /
    • 한국동물번식학회 2003년도 학술발표대회 발표논문초록집
    • /
    • pp.19-19
    • /
    • 2003
  • 소 난자 체외성숙에 있어 소 태아혈청 (fetal bovine serum: FBS)첨가시 높은 성숙율을 보이며 핵 이식 후 배 발달율에 있어서도 높다. 하지만 소 태아혈청은 hormone, growth factor, vitamine 그리고 다수의 어떤 잘 알려지지 않은 인자를 포함한 복잡한 배지로 알려져 있으며, 수정란 이식 후 태아의 발육중 및 태어난 직후에 발생되는 송아지에서 나타나는 몇몇 비정상적인 현상들의 원인인 것으로 보고되고 있다. 본 실험은 체외 배양시 소 태아혈청과 이의 대체물질로서 BSA 또는 PVA가 첨가된 배양조건에서의 복제 수정란의 배 발달율을 비교함과 동시에 배반포의 세포수 그리고 세포자연사 (Apoptosis)를 각각의 조건에서 비교함으로써 배발달에 미치는 효과를 알아보기 위하여 실시하였다. 핵이식은 소 체세포를 이용하였으며, 핵 이식 후 CR1aa 기본 배양액으로 FBS, BSA, 그리고 PVA를 첨가하여 5% $CO_2$, 5% $O_2$, 39$^{\circ}C$ 조건하에서 7~8일간 배양하였다.

  • PDF

Efficient Signal Feature Detection method using Spectral Correlation Function in the Fading channel

  • Song, Chang-Kun;Kim, Kyung-Seok
    • International Journal of Contents
    • /
    • 제3권2호
    • /
    • pp.35-39
    • /
    • 2007
  • The cognitive radio communication is taking the attentions because the development of the technique came to be possible to analyze wireless signals. In the IEEE 802.22 WRAN Systems[1], how to detect a spectrum and signals is continuously studied. In this paper, we propose the efficient signal detection method using SCF (Spectral Correlation Function). It is easy to detect the signal feature when we are using the SCF. Because most modulated signals have the cyclo-stationarity which is unique for each signal. But the fading channel effected serious influence even though it detects the feature of the signal. We applied LMS(Least Mean Square) filter for the compensation of the signal which is effected the serious influence in the fading channel. And we analyze some signal patterns through the SCF. And we show the unique signal feature of each signal through the SCF method. It is robust for low SNR(Signal to Noise Ratio) environment and we can distinguish it in the fading channel using LMS Filter.

PSS-PZT계 세라믹스의 탄성표면파 속도특성에 관한 연구 (A study on the velocity characteristics of surface acoustic wave in PSS-PZT ceramics)

  • 강진규;백동수;김준한;홍재일;박창엽
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제6권2호
    • /
    • pp.109-114
    • /
    • 1993
  • 본 논문에서는 0.05Pb(Sn$_{1}$2/Sb$_{1}$2/)-0.35PbTiO$_{3}$-0.60PbZrO $_{3}$+0.4[wt%] MnO$_{2}$ 조성을 갖는 3성분계 압전세라믹스에 Cr$_{2}$O$_{3}$ 의 첨가량을 변화시켜서 지연선을 제작하고 탄성표면파를 여기시켜 전파속도를 측정하였으며 EMMAS 기준에 따라 각 시편의 재료정수를 측정하고 이를 압전방정식에 적용하여 매질에 따라 여기되는 탄성표면파의 계산속도를 이론적으로 산출한 후 이를 지연선에서 측정된 실험속도와 비교하여 재료의 특성이 탄성표면파의 전파특성에 미치는 영향을 조사하였다. 그 결과 SAW 지연선에서 측정된 탄성표면파는 Generalized Rayleigh Wave였으며 재료의 특성이 우수한 시편일 수록 계산속도와 측정속도와의 차가 적었던 것으로 나타났고 오차한도는 평균 99.39[%]였으므로 실험속도 측정방법이 feed through 현상없이 우수한 측정방법이었음을 알 수 있었다.

  • PDF

Relationship between Plant Species Covers and Soil Chemical Properties in Poorly Controlled Waste Landfill Sites

  • Kim, Kee-Dae;Lee, Eun-Ju
    • Journal of Ecology and Environment
    • /
    • 제30권1호
    • /
    • pp.39-47
    • /
    • 2007
  • The relationships between the cover of herbaceous species and 15 soil chemical properties (organic carbon contents, total N, available P, exchangeable K, Na, Ca and Mg, HCl-extractable Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn) in nine poorly controlled waste landfill sites in Korea were examined by correlation analysis and multiple regression equations. Species showed different patterns of correlation between their cover values and soil chemical properties. The cover of Ambrosia artemisiifolia var. elatior, Aster subulatus var. sandwicensis and Erechtites hieracifolia were negatively correlated with the contents of Fe, Mn and Ni within landfill soils. Total cover of all species in quadrats was positively correlated with the contents of Cd and negatively correlated with the contents of Mn and Fe from stepwise regression analysis with 15 soil properties. Canonical correspondence analysis demonstrated that the distribution of native and exotic plants on poorly controlled landfills was significantly influenced by the contents of Na and Ca in soils, respectively.

초음파 진동절삭에 의한 광학 플라스틱의 미소표면성상 분석

  • 최인휴;김정두
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1992년도 추계학술대회 논문집
    • /
    • pp.115-120
    • /
    • 1992
  • Mirror-surface machining is very important machining technology to manufacture optical parts. especially brittle materials. In case of optical plastics, it is produced through both grinding and polishing till now. New machining method which is more efficient and contributed to the protection of the environmental pollution is, therefore, studied. In this , experimental results and an analysis of surface roughness in ultrasonic vibration cutting of optical plastic (CR-39) which is used for optical lens is presented. In results, a comparison of the micro-structure of machined surfaces produced by cutting with ultrasonic vibration and conventional turning is presented by analyzing S.E.M. photograph. Also, wavelength spectrum analysis is performed to investigate the surface-characteristics machined by ultrasonic vibration cutting.