• Journal of Animal Science and Technology
• /
• v.66 no.2
• /
• pp.366-373
• /
• 2024

This study aims to estimate the connectedness rating (CR) of Korean swine breeding herds. Using 104,380 performance and 83,200 reproduction records from three swine breeds (Yorkshire, Landrace and Duroc), the CR was estimated for two traits: average daily gain (ADG) and number born alive (NBA) in eight breeding herds in the Republic of Korea (hereafter, Korea). The average CR for ADG in the Yorkshire breed ranges from 1.32% to 28.5% depending on the farm. The average CR for NBA in the Yorkshire herd ranges from 0% to 12.79%. A total of 60% of Yorkshire and Duroc herds satisfied the preconditions suggested for genetic evaluation among the herds. The precondition for the genetic evaluation of CR for ADG, as a productive trait, was higher than 3% and that of NBA, as a reproductive trait, was higher than 1.5%. The ADG in the Yorkshire herds showed the highest average CR. However, the average CR of ADG in the Landrace herds was lower than the criterion of the precondition. The prediction error variance of the difference (PEVD) was employed to assess the validation of the CR, as PEVDs exhibit fluctuations that are coupled with the CR across the herds. A certain degree of connectedness is essential to estimate breeding value comparisons between pig herds. This study suggests that it is possible to evaluate the genetic performance together for ADG and NBA in the Yorkshire herds since the preconditions were satisfied for these four herds. It is also possible to perform a joint genetic analysis of the ADG records of all Duroc herds since the preconditions were also satisfied. This study provides new insight into understanding the genetic connectedness of Korean pig breeding herds. CR could be utilized to accelerate the genetic progress of Korean pig breeding herds.

• Journal of Digital Convergence
• /
• v.15 no.1
• /
• pp.199-208
• /
• 2017

This study investigates the components and rating system of reliable technology credit information for a technology finance donor who is a consumer of the information and aims to create an effective and optimal technology credit appraisal system to enlarge technology finance supply. Firstly, we calculate the optimal TCAR which becomes the maximum AUROC through the combination of ratio change, verify the substitution possibility between TAR and CR through the existing CR and system gap simulation, and propose a rating system by which financial institutes can utilize the TCAR as a credit rating. As a result, 70% : 30% is the most suitable as the weighted combination ratio of credit rating : technology rating. As a result of this study, we confirmed the possibility that the technical credit rating information could be substituted by the credit rating or the technology appraisal rating. Furthermore, it also suggests that sophisticated risk management is possible through using technology credit rating that are combined with credit and technology appraisal rating.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.569-578
• /
• 2017

Objective: The purposes of this experiment are an analysis of accuracy between target force level and subjective rating for the Target Force Level and an analysis of the patterns of subjective rating depending on target force level when there is no feedback from males for analysis. Background: The study of perceived exertion about the static contraction is processed with using among the matching procedure method between contralateral limbs, Exertion vs. Borg CR-10 scale and Exertion vs. %MVC (Maximum Voluntary Contraction). However, when there is no feedback, there is lack of the study on whether the subject can distinguish the subjective rating of the force depending on the target force levels. Method: Total 30 males, healthy subjects are measured the maximum grip strength, MVC, and then, each subject is measured the subjective rating and the accuracy with the random target force level (10, 20, 30, 40, 50, 60, 70, 80, and 90% MVC). Results: In the MVC study, males exerted 256.87N (${\pm}51.33$). In the subjective rating of grip strength increased for each Target Force Level (9 levels), higher subjective rating evaluated (p<0.05). In accuracy examination between target force level and subjective rating of grip strength by each %MVC, 10, 30, 40, 50, 70, 90% target force levels showed accurate strength (p>0.05). However, at 20% target force level, the subjects evaluated less subjective rating of grip strength than the target force (Underestimation), and at 60% and 80% target force level, the subjects evaluated more subjective rating of grip strength than the target force (Overestimation) (p<0.05). Conclusion: In the experiment, the MVC showed 256.87N (${\pm}51.33$) for the male adults and as the subjective rating value increased for each Target Force Level (9 levels), higher subjective rating evaluated (p<0.05). Moreover, the results of the accuracy test between target forces and subjective rating of the subjects showed that most participants rated a fairly accurate assessment of subjective rating of grip strength for Target Force Level (9 levels), except for 20%, 60%, and 80%MVC. Application: This experimental result would be used for basic data for the subjective rating of grip strength pattern by the target force level when the voluntary muscle is contracted.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.671-681
• /
• 2011

Objective: The purpose of this study is to compare the workload level at each lower limbs posture and suggest the ergonomic workstation guideline for working period by evaluating the imbalanced lower limbs postures from the physiological and psychophysical points of view. Background: Many workers like welders are working in various imbalanced lower limbs postures either due to the narrow working conditions or other environmental conditions. Method: Ten male subjects participated in this experiment. Subjects were asked to maintain 3 different lower limbs postures(standing, squatting and bending) with 3 different working conditions(balanced floor with no scaffold, imbalanced floor with 10cm height of scaffold, and imbalanced floor with 20cm height of scaffold). EMG data for the 4 muscle groups(Retus Femoris, Vastus Lateralis, Tibialis Anterior, Gastrocnemius) from each lower limbs posture were collected for 20 seconds every 2 minutes during the 8 minutes sustaining task. Subjects were also asked to report their discomfort ratings of body parts such as waist, upper legs, lower legs, and ankle. Results: The ANOVA results showed that the EMG root mean square(RMS) values and the discomfort ratings(CR-10 Rating Scale) were significantly affected by lower limbs postures and working time(p<0.05). The correlation was analyzed between the EMG data and the discomfort ratings. Also, prediction models for the discomfort rating for each posture were developed using physical condition, working time, and scaffold height. Conclusion: We strongly recommend that one should not work more than 6 minutes in a standing or squatting postures and should not work more than 4 minutes in a bending posture. Application: The results of this study could be used to design and assess working environments and methods. Furthermore, these results could be used to suggest ergonomic guidelines for the lower limbs postures such as squatting and bending in the working fields in order to prevent fatigue and pain in the lower limbs body.

• Textile Coloration and Finishing
• /
• v.23 no.4
• /
• pp.241-249
• /
• 2011

Cotton fabrics was treated with persimmon juice by padding and their dyeability and functionality were assessed including antibacterial activity and deodorization ratio. The merit of padding-based dyeing was easier color reproduction over traditional hand dyeing where various colors and color fastness to light and laundering are hard to obtain. With larger number of padding, the dyed fabrics showed deeper red-yellow colors, which had low brightness and high chromatic colors. The dyed cotton fabrics had a perspiration fastness of 4~5 rating, a rubbing fastness of 3~4 rating, and a washing fastness of 4 rating, As the number of padding and exposed time to sunlight or UV light increase, the values of K/S and ${\Delta}E$ increased and the colors became much deeper gradually. The color development had completed about 70 hours exposure to UV. Among the light sources, the dyed fabrics exposed to UV light showed deeper yellow-red color than those of exposed to sunlight. The cotton fabrics treated with premordants like Al, Cr, Cu, and Sn revealed strong yellow colors, especially the fabrics treated with Fe mordant showed greenish red-yellow colors. As the padding times of dyeing with persimmon juice increased, stiffness and water repellent property were enhanced in warp and weft directions, respectively. Also, the dyed fabrics have good antibacterial activity and deodorization.

• Journal of Cerebrovascular and Endovascular Neurosurgery
• /
• v.25 no.4
• /
• pp.390-402
• /
• 2023

Objective: Chronic subdural hematoma (CSDH) is a neurological complication following clipping surgery. However, the natural course and ideal approach for the treatment of clipping-related-CSDH (CR-CSDH) have not been clearly established. We aimed to investigate the course of CR-CSDH using chronological radiological findings. Methods: We performed a retrospective analysis of 28 (3.8%) patients who developed CSDH among 736 patients who underwent surgical clipping using pterional approach for unruptured aneurysms at our institution between December 2010 and December 2018. Patients underwent follow-up CT scan 6-8 weeks after clipping surgery and decision to pursue surgical intervention rests upon the patient's symptom based on the Markwalder's grading scale (MGS) and numeric rating scale (NRS). Results: Of the 28 patients, 3 patients (10.7%) underwent surgery, while 25 (89.2%) showed spontaneous resolution of CR-CSDH. Eighteen patients (64.2%) had mild headache with MGS of 0-1. The mean maximum hematoma volume was 41.9±30.9 ml (5.8-135 ml), and 26 patients (92.8%) had homogeneous hematoma. The mean time to hematoma resolution was 126.7±52.9 days (46-228 days). Comparing group of CR-CSDH volume ≥43 ml or a midline shift ≥5 mm, the difference in presence of linear low-density area (p=0.002) and age (p=0.026) between the conservative and operative groups were found to be statistically significant. Conclusions: Most CR-CSDH cases spontaneously resolved within 4 months. Therefore, we suggest that close observation should be performed if patient's symptoms are mild and special radiologic findings are present, despite its relatively large volume and midline shifting.

• Journal of Korean Medicine Rehabilitation
• /
• v.30 no.2
• /
• pp.105-123
• /
• 2020

Objectives This study was conducted to verify the effectiveness of east-west integrative rehabilitation therapy on activity of daily living and cognitive functional recovery in stroke patients by comparing with integrative rehabilitation therapy group and conventional rehabilitation therapy group in a single institution. Methods The medical records of 106 stroke patients hospitalized in Department of Rehabilitation Medicine, Dongguk University Bundang Oriental Hospital from January 1, 2017 to February 28, 2019 were reviewed. After screening and dividing it into conventional rehabilitation (CR) group and integrative rehabilitation (IR) group, Korean version of Modified Barthel Index (K-MBI), functional independence measure (FIM), clinical dementia rating-sum of boxes (CDR-SB) were statistically analyzed. Results IR group showed significant improvement in K-MBI, FIM, and CDR-SB after treatment (p<0.001) and there was a statistically significant difference in K-MBI and CDR-SB score changes than CR group (p<0.05). And chronic patient of IR group showed significant improvement in K-MBI, FIM, and CDR-SB after treatment (p<0.01) and there was a statistically significant difference in CDR-SB score changes than CR group (p<0.05). In particular, the earlier the treatment initiation time, the more the improvement in function and when the treatment started within 2 years from the onset and patients took acupuncture and pulsed electromagnetic therapy, all scales significantly improved (p<0.001). Conclusions IR showed more improvement on activities of daily life and cognitive functional recovery than CR in this study.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.79-83
• /
• 2001

Posture of the upper limbs in field works is known to be an important risk factor associated with CTD(Cumulative Trauma Disorders). In particular, uncomfortable posture and highly repetitive works in shipbuilding industry(for instance, sand blasting, grinding and blast painting, etc) made workers exposed to a great risk of injuries. The purpose of this paper is to analyze recruitment pattern of the muscles according to posture(joint angle displacement) during grinding. In this study, EMG signals of pectoralis major, latissimus dorsi, and posterior deltoid muscle were measured and analyzed from FlexComp EMG solution. And subjective ratings of perceived exertion were made using Borg's CR-10 rating scale.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.46-51
• /
• 2004

We fabricated a resistive type superconducting fault current limiter (SFCL) of 3-phase $6.6 kV_{rms}$ / rating, based on YBCO thin films grown on sapphire substrates with a diameter off inch. Each element of the SFCL was designed to have the rated voltage of $600 V_{rms}$ $/35A_{rms}$. The elements produced a single phase with 8${\times}$6 components connected in series and parallel. In addition, a NiCr shunt resistor of 23 $\Omega$ was connected in parallel to each of them for simultaneous quenches between the elements. Prior to investigating the performance of the 3 phase SFCL, we examined the quench characteristics for 8 elements connected in series. For all elements, simultaneous quenches and equal voltage distribution within 10% deviation from the average were obtained. Based on these results, performance of the SFCL for single line-to-ground faults was investigated. The SFCL successfully limited the fault current of $10 kA_{ rms}$ below 816 $A_{peak}$ within 0.12 msec right after the fault occurred. During the quench process, average temperature of all components did not exceed 250 K, and the SFCL was totally safe during the whole operation.

• Journal of the Korean Society of Radiology
• /
• v.10 no.7
• /
• pp.551-557
• /
• 2016

National competency standards, which are the contents of the knowledge, skills and attitudes required to perform a job in industry, is organized by the country. the job performance was evaluated based on the National competency standards from the third-year grade of radiology students by using field-based training courses. according to the evaluation results, students showed over 93% satisfactory ratio of job performance in all radiography projection methods. Therefore, it can be predicted that field-based training courses for students made a positive effect on improving their job performance. Exposure methods with CR equipment were evaluated the best rating, yet it has various problems. The standard deviation between students was very high, and the CR operation skill of students was insufficient. Film methods was evaluated also showed problems, due to the exposure condition setting and developing operation. although DR method was rated good to the students, it was evaluated that the operation skill of DR and the ancillary equipment operation skill was shortage. By supplementing the evaluation factors below proficiency levels to a course management in each exposure method, it could help students course achievement. Also, it could help students to improve job performance of clinical areas after graduation.