• The Journal of Korean Society for School & Community Health Education
• /
• v.10 no.2
• /
• pp.1-13
• /
• 2009

Objectives: This study is a quasi-experimental research with nonequivalent control group pretest-posttest design study to compare and verify the educational effects between CPR Song.Video Self-Instruction and CPR VSI. Method: We selected total 58 subjects who were freshmen at the Dept of Emergency Medical technology, G College in G Metropolitan City and 28 of them were experimental group which had no experience to have CPR instruction and consented to take part in this research and 30 students were control group. Data were collected from Apr. 27 to 29, 2009. Data were analyzed with SPSS/PC+(version 14.0). and all significance level was set as p<0.05. Results: 1. In the knowledge of CPR, the knowledge level before CPR instruction was 2.17 out of 10 in experimental group and 1.86 in control group. After CPR instruction, experimental group got 9.07 and it meant the increase of 6.89 and control group showed increase to 7.16(p=0.000). 2. Self-efficacy of CPR showed 2.61 out of 10 in both experimental and control groups, and after CPR instruction, experimental group showed increase of 3.93 as 6.55 and control group showed increase of 3.91 as 6.52(p=0.000). 3. Accuracy of CPR performance was 0.32 out of 10 in experimental group and 0.40 in control group. After CPR instruction, experimental group got 9.25 and showed increase of 8.92 and control group got 9.20 and showed increase of 8.80(p=0.000). 4. Study satisfaction was 4.22 out of 5 in experimental group and 3.04 in control group, and experimental group was higher than control group. there was no statistically significant difference. Conclusions: This study found that CPR Song；Video Self-Instruction achieved better results than CPR VSI. With these results, it is considered that CPR instruction for college students through mass communication or video will be very helpful.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.3
• /
• pp.392-400
• /
• 2004

This research uses the $TiO_2$/UV process to verify the most suitable condition and possibility to dispose dyeing wastewater that contains pigment and a large amount of pollutants. For this, this research has enforced experiments that compare photo adsorption, photolysis, and photo catalyst oxidation reaction, and also evaluated and analyzed the change of pH and $TiO_2$ dosage, irradiation rates of ultraviolet rays and the dosage change and injection method of $H_2O_2$. According to the results of the dyeing wastewater experiment of storehouse catalyst that uses the new form of $TiO_2$, the photo catalyst oxidation reaction proved to be more effective than photo adsorption and photolysis; 35%, 21% in the case of $TCOD_{cr}$ and 39%, 28% in the case of chromaticity. Taking into consideration the reaction time, amount of photo catalyst reaction and irradiation amount of ultraviolet rays, the decomposition efficiency of pH change proved to be most effective at pH 4. On the whole, the acidity area proved to be effective in dyeing water exclusion than neutral and alkalinity areas. Having evaluated the influence of $TiO_2$ dosage, not only does the decomposition efficiency continuously improve as the $TiO_2$ dosage increases but the shielding effect does not occur also when the $TiO_2$ is at a fixed state. The influence of ultraviolet irradiation amount concluded in the result that as the ultraviolet irradiation amount increases the decomposition efficiency continually increased, but in the case of chromaticity when the irradiation amount was higher than 37.8mW/cm2 the removal efficiency is slowed remarkably. The influence of $H_2O_2$ dosage evaluation reached the results that although the decomposition efficiency increases with the increase of $H_2O_2$ dosage, when above 150mg (total dosage: 1200mg) $H_2O_2$ consumes OH radical itself and reduces the decomposition efficiency. Also in the case of the $H_2O_2$ injection method rather than injecting in the whole amount of $H_2O_2$ (1200mg) needed at the beginning all at once, injecting divided quantities of $H_2O_2$ whenever the electric current density falls below 10mgfl reduces the wases of OH radical due to an excess of $H_2O_2$ and in tum heightens the decomposition efficiency.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.6
• /
• pp.727-735
• /
• 2007

The use of water by cities is increasing owing to industrialization, the concentration of population, and the enhancement of the standard of living. Accordingly, the amount of waste water is also increasing, and the degree of pollution of the water system is rising. In order to solve this problem, it is necessary to remove organisms and suspended particles as well as the products of eutrophication such as nitrates and phosphates. This study developed a high-end treatment engineering solution with maximum efficiency and lower costs by researching and developing a advanced treatment engineering solution with the use of Biosorption. As a result, the study conducted a test with a $50m^3/day$ Pilot Scale Plant by developing treatment engineering so that only the secondary treatment satisfies the standard of water quality and which provided optimal treatment efficiency along with convenient maintenance and management. The removal of organisms, which has to be pursued first for realizing nitrification during the test period, was made in such a way that there would be no oxidation by microorganisms in the reactor while preparing oxygen as an inhibitor for the growth of microorganism in the course of moving toward the primary settling pond. The study introduced microorganisms in the endogeneous respiration stage to perform adhesion, absorption, and filtering by bringing them into contact with the inflowing water with the use of a sludge returning from the secondary settling pond. Also a test was conducted to determine how effective the microorganisms are as an inner source of carbon. The HRT(Hydraulic Retention Time) in the nitrification tank (aerobic tank) could be reduced to two hours or below, and the stable treatment efficiency of the process using the organisms absorbed in the NAR reactor as a source of carbon could be proven. Also, given that the anaerobic condition of the pre-treatment tank becomes basic in the area of phosphate discharge, it was found that there was excellent efficiency for the removal of phosphate when the pre-treatment tank induced the discharge of phosphate and the polishing reactor induced the uptake of phosphate. The removal efficiency was shown to be about 94.4% for $BOD_5$. 90.7% for $COD_{Cr}$ 84.3% for $COD_{Mn}$, 96.0% for SS, 77.3% for TN, and 96.0% for TP.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.13-23
• /
• 2014

A lab-scale Anaerobic Baffled Reactor (ABR) was applied to treat a primary sludge taken from a municipal wastewater treatment plant. In this experiment, acidogenic reaction was promoted by operating the ABR with short hydraulic retention time (HRT) to produce sufficient volatile fatty acids (VFA) instead of production of methane. The performance of ABR on the VFA production and total solids reduction was observed with different operating conditions with 2, 4, 6, and 8 days of HRT. Corresponding organic loading rates were 6.7, 3.4, 2.2, and $1.6kgCOD_{cr}/m^3{\cdot}day$. As HRT increased the removal rate of TCOD was also increased (82.5, 84.2, 96.9, and 95.9 % in average for HRT of 2, 4, 6, and 8 days, respectively) because the settlement of solids was enhanced in the baffle by the decrease of upflow velocity. At HRT of 2 days the average concentration of VFA in the effluent was measured at $1,306{\pm}552$ mgCOD/L corresponding to 107 % increment as compared to the VFA concentration in the influent. However, as HRT increased VFA concentraiotn was decreased to $143{\pm}552$ mgCOD/L at HRT of 8 days. The reduction rates of total solids were 12.2, 26.5, 24.8, and 43.0 % for HRT of 2, 4, 6, and 8 days. As HRT increased the hydrolysis of organic particulate matters in the reactor was enhanced due to the increasing of solids retention time in the baffle zone with low upflow velocity in long HRT condition. Consequently, we found that a primary sludge became a good source of VFA production by the application of ABR process with HRT less than 4 days and the 12-26 % of total solids reduction was expected at these conditions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.274-282
• /
• 1998

This study deals with sinking resistance for purse seine, in the case of different d/l, ratio of twine diameter and leg length. Experiments carried out on the six types simplified reduced model seines which were made of knotless netting. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two -ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cm for seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. Experiments were measured in the observation channel of a flume tank at the static conditions Sinking motion was recorded by the two sets TV-camera for VTR which were placed in top and side of the model seine, and reading coordinate carried out by the video digitization system. An analysis were calculated out by simultaneous differential equations for numerical method by Runge - Kutta - Gill sub - routine. The results obtained were as follows: 1. Average sinking speed of seine of seine margin was fastest for Ⅵ seine followed by V, IV, III, II and I seines. 2. The coefficient of resistance for a seine wall was depended upon the ratio of d/l : KD =0.081 (d/l )-0.5 3. The coefficient of resistance for netting bundle was not depended upon the ratio of d/l :CR = 0.91 (), d : Twine diameter, l : Leg length, : Density of netting materals, $\omega$ : Density of water

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.2
• /
• pp.143-149
• /
• 2006

Background: Irinotecan (topoisomerase I inhibitor) is effective as a monotherapy against small-cell lung cancer(SCLC). Cisplatin is also an important drug against SCLC. A phase II study of irinotecan combined with cisplatin was carried out to evaluate the efficacy and toxicity of this combined regimen as a first line treatment in patients with extensive SCLC. Methods: Thirty-nine patients with previously untreated extensive SCLC were enrolled in this study. Irinotecan $60mg/m^2$ was administered intravenously on days 1, 8 and 15, and in combination with cisplatin $60mg/m^2$ on day 1 and every 28 days thereafter. Four cycles of chemotherapy were given to the patients. Results: The overall response rate was 77% with a complete response (CR) rate of 8%. The median survival time, 1- and 2-year survival rate were 14.8 months, 60.9% and 27.6%, respectively. The median progression free survival time, 6-and 12-month progression free survival rate were 8.4 months, 75% and 18.8%, respectively. The WHO grade 3 or more toxicity encountered were leukopenia (23%), diarrhea (26%). Two patients changed their chemotherapeutic regimen and one patient died from severe diarrhea. Conclusion: The combination of irinotecan and cisplatin is effective as a first line therapy in extensive SCLC is effective, but has severe or fatal diarrhea as toxicity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.6
• /
• pp.313-318
• /
• 2017

The microstructure of a cobalt-base superalloy (ECY768) obtained by an investment casting process was studied. This work focuses on the resulting microstructures arising from different melt and mold temperatures in normal industrial environmental conditions. The characterization of the samples was carried out using optical microscopy, field emission scanning electron microscopy and energy-dispersive spectroscopy. In this study, the as-cast microstructure is an ${\alpha}-Co$ (face-centered cubic) dendritic matrix with the presence of a secondary phase, such as $M_{23}C_6-type$ carbides precipitated at grain boundaries. These precipitates are the main strengthening mechanism in this type of alloy. Other minority phases, such as the MC-type phase, was also detected and their presence could be linked to the manufacturing process and environment.

• Journal of Home Health Care Nursing
• /
• v.14 no.1
• /
• pp.31-41
• /
• 2007

Purpose: This study was designed to evaluate the effect of home care nursing intervention with parenteral hydration and IV anti-emetic therapy on distress, nutritional status, anxiety, depression and QOL in gynecologic cancer patients who were undergoing combination chemotherapy. Methods: Quasi-experimental design was used to test the intervention. Changes of result variables were measured to evaluate effects of the intervention. variables consisted of serum lab results(auto analytic equipment for lab), symptom distress Scale(McCorkle & Young, 1978; Song et al., 2000), nutritional status(body weight, circumference of upper arm, serum protein, serum albumin, oral intake per day), anxiety(Spielberger, 1972; Kim & Shin, 1978), depression(Zung, 1965; Kim, 1995) and QOL(Padilla et al., 1983; Lee & Jo, 1996). Subjects were selected among gynecologic cancer patients(EG 15 patients and CG 15 patients) by convenient sampling. Data collection was done from June to Nov. in 2000. Data were analyzed by Chi-test and Mann-whitney U test using SPSS Win 10.0. Result: Hypothesis 1, the EG receiving this intervention equals to lab test(Hb & ANC, GOT & GPT, BUN & Cr) the CG, was supported(u=69.50 p=.074; u=94.50, p= .455; u= 89.50, p= .339; u=106.50, p= .803; u=75.00, p= .119; u=97.50, p= .523). Hypothesis 2, the EG has less symptom distress than the CG, was also supported(u=43.50, p= .004). Hypothesis 3, the EG has higher nutritional status than the CG, was partially supported on daily oral intake (u=59.00, p= .025). Hypothesis 4, the EG has less anxiety than the CG, was rejected(u=86.50, p= .280). Hypothesis 5, the EG has less depression than the CG, was rejected(u=203.50, p= .228). and the last hypothesis 6, the EG has higher QOL than the CG was supported (u=51.50, p= .011). Conclusion: Home care nursing intervention undergone in this study was found to be effective to reduce patients' symptom distress and to improve their oral intake and QOL.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.244-251
• /
• 2017

PURPOSE. The purpose of this study was to determine fracture resistance and failure modes of three-unit fixed dental prostheses (FDPs) made of lithium disilicate pressed on zirconia (LZ), monolithic lithium disilicate (ML), and monolithic zirconia (MZ). MATERIALS AND METHODS. Co-Cr alloy three-unit metal FDPs model with maxillary first premolar and first molar abutments was fabricated. Three different FDPs groups, LZ, ML, and MZ, were prepared (n = 5 per group). The three-unit FDPs designs were identical for all specimens and cemented with resin cement on the prepared metal model. The region of pontic in FDPs was given 50,000 times of cyclic preloading at 2 Hz via dental chewing simulator and received a static load until fracture with universal testing machine fixed at $10^{\circ}$. The fracture resistance and mode of failure were recorded. Statistical analyses were performed using the Kruskal-Wallis test and Mann-Whitney U test with Bonferroni's correction (${\alpha}=0.05/3=0.017$). RESULTS. A significant difference in fracture resistance was found between LZ ($4943.87{\pm}1243.70N$) and ML ($2872.61{\pm}658.78N$) groups, as well as between ML and MZ ($4948.02{\pm}974.51N$) groups (P<.05), but no significant difference was found between LZ and MZ groups (P>.05). With regard to fracture pattern, there were three cases of veneer chipping and two interfacial fractures in LZ group, and complete fracture was observed in all the specimens of ML and MZ groups. CONCLUSION. Compared to monolithic lithium disilicate FDPs, monolithic zirconia FDPs and lithium disilicate glass ceramics pressed on zirconia-based FDPs showed superior fracture resistance while they manifested comparable fracture resistances.

• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.111-117
• /
• 2000

In this study, the bearing capacity behavior of strip footing located above a continuous cavity in sand was investigated experimentally. The model footing test was performed in a model box made by using raining method in sand. The model footing test results were compared with those obtained from theoretically proposed equations. The results of the analysis indicate that there is a critical region under the footing. For strip footing, there exists a critical depth below which the presence of the cavity has negligible influence on the footing performance. Only when the cavity is located within this region will the footing performance be significantly affected by the presence of the cavity. The size of the critical region depends on several factors such as footing shape, soil property, cavity size and cavity shape. When the cavity is located within the critical region, the bearing capacity of the footing varies with various factors, such as the size and location of the cavity and the depth of foundation. Based on the experimental study, the following conclusions were induced. 1. The ultimate bearing capacity due to the eccentricity of a underground cavity increases at the rate of the small rather than that due to the depth of a underground cavity. This indicates that the bearing capacity of a strip footing is influenced on the depth rather than the eccentricity of a underground cavity. 2. The critical $depth(D/B)_{cr}$, by underground cavity in sand soil ground that is made by the relative density($D_r$)=55%, 65%, 75%, approaches a range of about 8~10 in case of W/B=1, and about 11~13 in case of W/B=2. 3. In case of the relative density($D_r$) 75%, the most outstanding differential settlement trend is shown in the depth of 4~8cm regardless of the size of cavity, namely, when the value of D/B is 1~2. Therefore, a underground cavity influences on not only the decrease of the bearing capacity but also the differential settlement of a strip footing.