• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.16 no.1
• /
• pp.28-32
• /
• 2005

Background and Objectives : The most important two factors of the voice production are the respiratory function which is the power source of voice and the glottic closure that transform the air flow into sound signals. The purpose of this study was to investigate the differences between trained singers and untrained controls under varying intensity at a constant vocal pitch by simulataneous using the airway interruption method and electroglottography(EGG). Materials and Methods : Under two different intensity condition at a constant vocal pitch(/G/), 20(Male 10, Female 10) trained singers were studied. Mean flow rate(MFR), subglottic pressure(Psub) and intensity were measured with aerodynamic test using the Phonatory function analyzer. Closed quotients(CQ), jitter and shimmer were also investigated by electroglottography using Lx speech studio. These data were compared with that of normal controls. Results : MFR and Psub were increased on high intensity condition in all subject groups but there was no statistically significance. Statistically significant increasing of CQ. were observed in male trained singers on high intensity condition (untrained male : 51.31${\pm}$3.70%, trained male :55.52${\pm}$6.07%, p=.039). Shimmer percent, one of the phonatory stability parameters, was also decreased statistically in all subject groups(p<.001). Conclusion : The trained singers' phonation was more efficient than untrained singers. The result means that the trained singers can increase the loudness with little changing of mean flow rate, subglottic pressure but more increasing of glottic closed quotients.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.15 no.1
• /
• pp.21-26
• /
• 2004

Vocal Register Transition(Passaggio) is one of the most important vocal technique for classically trined male singers(tenor). Passaggio is that it bridges the chest register to head register without a noticeable voice break. Vocalist gest the feeling that voice is not locked a particular register. The purpose of this study was to clarify the difference between easy($B_3$) tone and non passaggio(F#_4$) & passaggio(F#_4$). We selected 6 trained singers(tenor), who had more than 12.6 years of experience and were well trained in passaggio technique. Simulataneous measurement was performed frequency(F0), mean flow rate(MFR), intensity(I), and subglottal pressure(Psub) using a phonatory function analyzer(Nagashima) and Closed Quotient(CQ), Jitter, Shimmer, NHR a Electro-glottography(EGG) of Lx. Speech Studio(Laryngogrph Lt, London, UK) and vocal efficiency was calculated by Carroll's method. For the tenor, target tone/a/was measured in three conditions : 1) easy phonation : $B_3$, 2) high tone without passaggio : F#_4$, 3) high tone with passaggio : F#_4$). The results revealed that F0 of the target tones between non-passaggio group and passaggio group were not significantly different though higher is F0, higher is subglottal pressure. And also CQ, MFR, Psub were increased in passagio than nonpssagio but these values were not statistically different. This study concluded that passaggio is the vocal technique to make the same quality of tone between chest register and head register in tenor.

• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.133-140
• /
• 2011

Muscle misuse dysphonia (MMD) is defined as a behavioral voice disorder resulting from inappropriate contractions of intrinsic and/or extrinsic laryngeal muscles. The purpose of this study was to investigate the effect of motor learning guided laryngeal motor control therapy (MLG-LMCT) which is designed to improve an existing LMT and further the effective voice treatment on people with muscle misuse dysphonia. Forty-six people with MMD (M:F=16:30) participated in this study. The voice samples of the participants were recorded to investigate the effect of MLG-LMCT before and after the voice therapy. Voice samples were analyzed via electro-glotto-graph (EGG). Contact quotient (CQ), speed quotient (SQ), and waveform were reported. In addition, perceptual and acoustical evaluation were conducted to determine the change of voice improvement after treatment. The experimenter massaged the tensioned muscles around the neck. In order to find more proper phonation the experimenter showed the subjects their EGG wave forms as to whether or not they are moving the vocal folds to the appropriate position. Therefore, the EGG wave forms were used as a type of visual feedback. With the wave form, the experimenter helped subjects move the vocal folds and laryngeal muscles to find more proper voice production. The sensory stimuli from the experimenter gradually faded out. A paired dependent t- test revealed that there was significant differences in CQ between pre- and post-therapy. Perceptually, overall, rough, breathy, strain, and transition were significantly reduced. Acoustically, there were significant differences in Fo, jitter, shimmer, and NHR. After using MLG-LMCT, most of the subjects showed improvements in voice quality. The results from this study led us to the following conclusions: Motor learning guided laryngeal motor control therapy (MLG-LMCT) has reduces muscle misuse dysphonia. These results may occur because a visual feedback from EGG wave form can maintain the effect of the muscle tension reduction from laryngeal manual therapy. In case of people with MMD who reduced muscle tension from the therapy (LMT) but, not appropriately manipulating the location of larynx or adducting the vocal folds, MLG-LMCT might be an alternative therapy approach.

• Korean Journal of Plant Resources
• /
• v.29 no.1
• /
• pp.20-25
• /
• 2016

Five caffeoylquinic acids of Aster altaicus var. uchiyamae Kitamura (Compositae) leaves were identified using standard compounds by HPLC and determined as follows: 3,4-di-O-caffeoylquinic acid (4.92 ± 0.06 ㎎/g dried weight), 3,5-di-O-caffeoylquinic acid (3.95 ± 0.13 ㎎/g), 4,5-di-O-caffeoylquinic acid (1.39 ± 0.10 ㎎/g), 5-O-caffeoylquinic acid (chlorogenic acid, 8.05 ± 0.21 ㎎/g), 3-O-caffeoylquinic acid (4.97 ± 0.18 ㎎/g). The total content of five caffeoylquinic acids were calculated as 26.73 ± 0.26 ㎎/g dried weight while the percentage of the five compounds in the MeOH extract was calculated as 25.22 ± 0.25%. The IC₅₀ value of the MeOH extract scavenging peroxynitrite (ONOO⁻) was shown as 5.16 ± 0.15 ㎍/㎖.

• Journal of Hydrogen and New Energy
• /
• v.26 no.5
• /
• pp.402-408
• /
• 2015

In D-T fusion reaction, $D_2$ (duterium) and $T_2$(tritium) are used as fuel gas. The exhaust gas of nuclear fusion includes hydrogen isotopes $Q_2$ (Q means H, D or T), tritiated components ($CQ_4$ and $Q_2O$), CO, $CO_2$, etc. All of hydrogen isotopes should be recovered before released to the atmosphere. This study focused on the recovery of hydrogen isotopes from $CQ_4$ and $Q_2O$. Two kinds of experiments were conducted to investigate the catalytic reaction characteristics of SMR (Steam Methane Reforming) and WGS (Water Gas Shift) reactions using Pt catalyst. First test was performed to convert $CH_4$ into $H_2$ using 6% $CH_4$, 6% CO/Ar feed gas. In the other test, 100% CO gas was used to convert $H_2O$ into $H_2$ at various reaction conditions (reaction temperature, S/C ratio, GHSV). As a result of the first test, $CH_4$ and CO conversion were 41.6%, 57.8% respectively at $600^{\circ}C$, S/C ratio 3, GHSV $2000hr^{-1}$. And CO conversion was 72% at $400^{\circ}C$, S/C ratio 0.95, GHSV $333hr^{-1}$ in the second test.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.2
• /
• pp.60-64
• /
• 2006

In typical video streaming services such as MPEG encoded video, the transmission data sizes change depending on the frame types and the required bandwidth for QoS support also changes as time passes. Accordingly, in video streaming services using the Internet it could happen that the video services stop occasionally due to instantaneous deficiencies of the required bandwidth under unexpected congestion even if the highest priority is allocated to the service by network administration. In this paper, we investigate several methods for bandwidth allocation and traffic engineering to support MPEG video traffic and propose a new method to reduce the transmission delay and enhance the throughput, there by provisioning the QoS requirements. In the proposed scheme, LSPs are established based on temporal variation patterns of the Internet traffic and the CQ_LLQ policing scheme is applied for traffic shaping at the ingress routers. Finally we verified the performance of the proposed scheme via computer simulations using OPNET.

• Journal of Convergence for Information Technology
• /
• v.11 no.10
• /
• pp.250-257
• /
• 2021

The author tried to verify the mediating effect of the variable, perceived behavioral control, in the relationship between the independent variables(cosmetics-related variables, consumer's preference, advice & inducement), and the dependent variable(purchasing behavior), through AMOS structural equation modeling. As a result of analyzing the mediating effect in the impact relationship between latent variables, it was found that PBC(perceived behavior control) plays a mediating role in the impact relationship between CQ(cosmetics quality) and PB(purchasing behavior). Author found that the higher the quality of cosmetics and the greater the perceived behavior control in domestic cosmetics purchasing behavior, the more likely it will lead to purchasing behavior. In this context, while efforts are being made to improve cosmetic quality, measures to increase perceived behavior control, which can be said to be autonomy in purchasing behavior, should be sought.

• Journal of Technologic Dentistry
• /
• v.42 no.4
• /
• pp.355-361
• /
• 2020

Purpose: In this study, we added two kinds of photoinitiators (CQ and TPO) to prepare two kinds of denture base resins (Bis-GMA series and UDMA series) for three-dimensional (3D) printing to compare and analyze their mechanical and biological properties and to find the optimal composition. Methods: Control specimens were made using the mold made of polyvinyl siloxane of the same size. Light curing was performed twice for 20 seconds on both the upper and lower surfaces with LED (light emitting diode) light-curing unit (n=10). Experimental 3D printing dental resins were prepared, to which two photoinitiators were added. Digital light processing type 3D printer (EMBER, Autodesk, CA, USA) was used for 3D printing. The specimen size was 64 mm×10 mm×3.3 mm according to ISO 20795-1. The final specimens were tested for flexural strength and flexural modulus, and MTT test was performed. Furthermore, one-way analysis of variance was performed, and the post-test was analyzed by Duncan's test at α=0.05. Results: The flexural strength of both Bis-GMA+CQ (97.12±6.47 MPa) and UDMA+TPO (97.40±3.75 MPa) was significantly higher (p<0.05) in the experimental group. The flexural modulus in the experimental group of UDMA+TPO (2.56±0.06 GPa) was the highest (p<0.05). MTT test revealed that all the experimental groups showed more than 70% cell activity. Conclusion: The composition of UDMA+TPO showed excellent results in flexural strength, flexural modulus, and biocompatibility.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.203-232
• /
• 2006

The purposes of this study are to examine the effects of learning, which was applied TRIZ's 40 inventive principles, on the improvement of learners' creativity and to offer basic information that would be necessary to study on Inventive Education in Technology Education. In order to achieve the purposes, objects were divided into two groups, experiment group(74 students) and control group(67 students), who were from B Middle school in Daejeon. Creativity Self-Assessment and Student Inventive Rating Scale were used as tools for research so that we could find the homogeneity in two groups. An applied design method was nonequivalent control group pretest-posttest design. This study was performed for 2 hours on the 1st and the 3rd Saturday in every month from the 3rd week of March, 2006 to the 3rd of July of 2006, and total researching period was 9 weeks. In that time, the students were required to learn 40 inventive principles. The results from this study are as below. (1) Applying TRIZ's 40 inventive principles had a positive effect on students' CQ(creative quotient), as influencing on the subordinate factors of creativity, such as, originality, germinal, trasformational, value, attraction, expressive power and organic systemicity. However it didn't have any effect on adequateness, properness, merit, complex and elegance. (2) Applying TRIZ's 40 inventive principles had a significant effect neither on CQ by sex, nor on the subordinate factors of creativity, except for originality and expressive power. Based on the results of the experiment, below suggestions were made to promote the application of TRIZ's 40 inventive principles to Technology Education. (1) Although this study was performed by using development activities, it is necessary to study more systemically to apply 40 inventive principles to regular subject in Technology Education. (2) As creativity was very important in Technology Education, there should be studies on the various types of inventive principles and techniques for Inventive Education in Technology Education.

• Korean Journal of Child Studies
• /
• v.26 no.2
• /
• pp.75-89
• /
• 2005

The subjects of this study were 172 5-year-old children enrolled in a kindergarten located in Daejeon city. Instruments were the K-ABC(1997) to test children's intelligence and the TTCT(1999) to test children's creativity, Data were analyzed by Pearson's R and Canonical R. Results indicated that the relation between K-ABC IQ and TTCT CQ was statistically significant(r=.292, p<.000). This result is at variance with threshold theory where the correlation between intelligence and creativity is predicted to be high for children with IQ below 120, but above that level, the correlations are predicted to be much lower. A significant canonical function(Wilk's =.760, p<.000) was found between the sequential processing scale, achievement scale of K-ABC and elaborateness, resistance to premature closure of TTCT.