• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.93-98
• /
• 2017

The feasibility of incorporating cabbage powder (CP) as a value-added food ingredient into convenient food products was investigated using cookie as a model system. CP was incorporated into cookies at amounts of 0, 2, 4, 6, and 8% (w/w) based on total weight of wheat flour. pH level and moisture content of cookie dough decreased and increased significantly, respectively, with increasing levels of CP (p<0.05), whereas density was not directly affected by levels of CP incorporation. The spread ratio of cookies and their hardness increased significantly while the loss rate decreased significantly with increasing levels of CP (p<0.05). In terms of color, lightness and yellowness decreased while redness increased significantly (p<0.05) with increasing levels of CP. 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulphonic acid) (ABTS) radical scavenging activities were significantly elevated by CP addition, and they increased significantly as CP concentration increased in the formulation (p<0.05). Finally, consumer acceptance test indicated that the higher than 4% of CP incorporation had an adverse effect on general consumer preferences. In contrast, cookies with moderate levels of CP (2%) were recommended based on overall scores to take advantage of the antioxidant properties of CP without sacrificing consumer acceptability.

• Journal of Pharmacopuncture
• /
• v.23 no.4
• /
• pp.237-246
• /
• 2020

Objectives: Capsaicin-containing (CP) pharmacopuncture was developed to treat neuropathic pain. This study was conducted to assess the toxicity of CP extract for pharmacopuncture, using a micronucleus test. Methods: First, a dose range finding study was conducted. Then an in vivo micronucleus test was performed to determine the induction of micronuclei in mouse bone marrow cells after intramuscular administration of CP twice with a 24-hour interval to 8-week-old ICR mice. A high dose of 0.2 mL/animal was selected, and this was sequentially diluted by applying a geometric ratio of 2 to produce two lower dose levels (0.1 and 0.05 mL/animal). In addition, negative and positive control groups were set up, and an HPLC analysis was conducted to confirm the capsaicin content of CP. Results: The incidence of micro-nucleated polychromatic erythrocytes in polychromatic erythrocytes in the CP-treated group was similar to that in the negative-control group, while that in the positive-control group was significantly greater. In addition, the ratio of polychromatic erythrocytes to total erythrocytes in the CP treatment group and the positive control group was not significantly different from the negative control group. In the HPLC analysis, capsaicin in the CP was identified through a comparison with the retention time of the capsaicin standard of 27 min. Conclusion: CP did not show any indication of any potential to induce micronuclei formation in bone marrow cells of ICR mice under the conditions of this study. Further toxicity studies are necessary to ensure the safety of the use of CP in clinical practice.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.49-58
• /
• 2006

The purpose of this study was to examine the effect of covering yarn's twist on mechanical properties of knitted fabrics of composite yarns with single covering process. Four yarns that were used in this study: two different composite yarns made from the four kinds of cotton and functional polyester-(Poly-A) with the ratio of 52:48, and the rest two yarns are the original cotton 100% yarn and the poly-A 100% yarn. The two kinds of composite yarns, CP1 and CP2, were processed on the single covering process. CP1 was applied on the single covering process with S-800 tpm, where Poly-A was used as covering yarn and cotton was used as core yarn. CP2 was applied on the same process as CP1 except that Poly-A had been applied on the two-for-one twisting process with S-400 tpm on the previous step. Sixteen mechanical properties of all the four knifed fabrics knitted under the same knitting conditions were measured by KES-FB system with the outer knit condition. And 3D CAD dressmaking simulations, which were driven by some of the mechanical properties, were presented. The results were as follows: CP2 had high RT values with twisting of covering yarn. CP2 also had high B, 2HB values because of higher linear density. SMD was affected rather by twisting of covering yarn than by fine hair of the cotton surface. Twisting of covering yarn made it decreasing T value and increasing W value. Dressmaking 3D CAD simulations showed that there are buckling effects on CP2 because of high bending rigidity and shear rigidity.

• Korean Journal of Poultry Science
• /
• v.35 no.2
• /
• pp.115-121
• /
• 2008

The study was conducted to evaluate the effects of dietary microbial phytase on egg productivity, egg quality, phosphorus utilization and nutrient digestibility in laying hens. The animals used in the experiment were a total of 120 Hy-Line Brown laying hens (32 weeks old). Dietary treatments included 1) CON (basal diet), 2) LP (low phosphorus diet) 3) NP (low phosphorus diet + 0.03% normal microbial phytase) and 4) CP (low phosphorus diet + 0.03% coated microbial phytase). Six laying hens were allotted to a block (pen) with five replicated. Through the whole period of experiment, egg production was significantly increased in CON and CP treatments compared to LP treatment (P<0.05). CON, CP and NP treatments significantly increased their egg shell breaking strength and egg shell thickness compared to LP treatment (P<0.05). CON, CP and NP treatments resulted higher yolk color and Haugh unit than LP treatment (P<0.05). Calcium and inorganic phosphorus contents in blood were higher in CP treatment compared to LP treatment (P<0.05). Dry matter digestibility and nitrogen digestibility were greater in CP treatment than CON, LP and NP treatments (P<0.05). Crude ash was increased in CON, CP and NP treatments compared to LP treatment (P<0.05). Calcium digestibility and phosphorus digestibility were significantly improved in CP and NP treatments than CON and LP treatments (P<0.05). Calcium retention of CON, CP and NP treatments were higher than LP treatment (P<0.05). Phosphorus retention was increased in CP and NP treatments compared to CON and LP treatments (P<0.05). LP treatment significantly increased their nitrogen, calcium excretion compared to CON, CP and NP treatments (P<0.05). Phosphorus excretion was decreased in LP, CP and NP treatments compared to CON treatment (P<0.05). In conclusion, CP treatment improved egg production, egg quality, inorganic calcium and phosphorus in blood, calcium and phosphorus retention and nutrient digestibility and decreased nitrogen and calcium excretion in laying hens.

• Journal of Korea Foundry Society
• /
• v.11 no.1
• /
• pp.71-78
• /
• 1991

Microstructure and characteristics of the SiCp/Al-4.5wt%Cu-1wt%Mg composites fabricated by the combination of the compocasting and the pressurized continuous casting process, which is one of the processes to decrease the limitations of the size, and shops of the products, are investigated. The main results are as follows: 1) the SiCp/Al alloy matrix composites can be made continuously 2) as the amount of SiCp addition increases; (1) the degree of directional solidification of matrix structure decreases, and that of SiCp dispersion improves, (2) wear resistance improves, and especially these composites show the excellent wear resistance under the high sliding speed and high final load condition, (3) wear mechanism of these composites is changed from adhesive wear into abrasive wear, and the tendency of that becomes outstanding with increasing sliding speed.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.147-156
• /
• 2023

Circularly polarized (CP) emission can be achieved by integrating emissive materials into chiral metasurfaces. Such CP light sources in integrated device platforms are desirable for important potential applications. However, the exact characterization of the polarization state in CP emission may include some errors because of the unwanted polarization distortion caused by optical components (e.g., beam splitter) in the optical setup. Here, we consider CP emission measurements from chiral metasurfaces and characterize the polarization distortion caused by the beam splitter. We first detail the procedures for the Stokes parameters and Mueller matrix measurements. Then, we directly measure the Mueller matrix of the beam splitter and retrieve the original polarization state of CP emission from our metasurface sample. Using the measured Mueller matrix of the beam splitter, we specifically identify what contributes to polarization distortion in CP emission. Our work may provide useful guidelines for the characterization and compensation of polarization distortion in general Stokes parameter measurements.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1518-1523
• /
• 2003

This experiment was conducted to investigate the effect of various feeding regimens on growth performance, nutrient digestibilities, nitrogen retention, blood urea nitrogen (BUN) concentration and feed cost in young pigs weaned at 21 days of age. One hundred twenty crossbred pigs (Landrace${\times}$Large White${\times}$Duroc, average 6.8 kg BW), weaned at 21 days of age, were allotted to 5 treatments in a 5 replicates by a randomized completely block (RCB) design. Treatments were as follow: 1) 1P (1-4 weeks: CP 23% and lysine 1.60%), 2) 2P-I (1 week: CP 23% and lysine 1.60%, 2-4 weeks: CP 21% and lysine 1.45%), 3) 2P-II (1-2 weeks: CP 23% and lysine 1.60%, 3-4 weeks: CP 21% and lysine 1.45%), 4) 2P-III (1-3 weeks: CP 23% and lysine 1.60%, 4 week: CP 21% and lysine 1.45%), 5) 3P (1 week: CP 23% and lysine 1.60%, 2-3 weeks: CP 21% and lysine 1.45%, 4 week: CP 19% and lysine 1.30%). Three different diets were formulated and supplied according to phase feeding programs. Diet 1 contains 23% crude protein and 1.60% lysine, diet 2 contains 21% crude protein and 1.45% lysine and diet 3 contains 19% crude protein and 1.30 lysine, respectively. Although there was no significant difference in growth performances, there was a beneficial effect of 3 phase feeding. The ADG was higher in 3P treatment than other treatments and it was observed clearly in late period (3-4 weeks) than in early period. Also, with increase in age, growth rate of pigs in 3P treatment was higher than that in 1P treatment approximately 37% (p=0.1379). There were no significant differences among all treatments in nutrient digestibility. The concentration of BUN was higher in pigs were fed diet containing 21% crude protein and 1.45% lysine (eg, 2P-1 and 3P) than those supplied diet containing high nutrient value at 2 week. The lowest feed cost/kg weight gain of pigs showed in 3P among treatments (p<0.05) whereas, high feed cost/kg weight gain of pigs was calculated in 1P and 2P-II treatments compared with 2P-I and 2 P-II (p<0.05), because of high milk products were used in those diet.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.566.1-566
• /
• 2001

The most desirable healing process for endodontic therapy is apical closure by hard tissue such as dentine or cementum. Then, we estimated hard tissue conductivity of tetracalcium phosphate (4CP)/dicalcium phosphate (2CP) compound using mandibular first molars of SD rats. Residual pulp responses to the calcium phosphate compound were examined at several amputation levels of pulp. 2CP was purchased and passed through a $32-\mu\textrm{m}$ sieve. 4CP was obtained from a stoichiometric mixture of 2CP and calcium carbonate (Mol ratio: Ca/P=2.0) by the dry synthetic method at 1, 400(C for 8 hours.(omitted)

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.1
• /
• pp.31-38
• /
• 2013

The degradation of 4-chlorophenol(4-CP) by various AOPs(Advanced Oxidation Processes) with continuous feeding of $H_2O_2$, including the ultraviolet/hydrogen peroxide, the Fenton and the photo-Fenton process has been investigated. The photo-Fenton process showed the highest removal efficiency for degradation of 4-chlorophenol than those of other AOPs including the Fenton process and the combined UV process with continuous feeding of $H_2O_2$. In the photo-Fenton process, the optimal experimental condition for 4-CP degradation was obtained at pH 3. Also the 4-CP removal efficiency increased with decreasing of the initial 4-CP concentration. 4-chlorocatechol and 4-chlororesorcinol were identified as photo-Fenton reaction intermediates, and the degradation pathways of 4-CP in the aqueous phase during the photo-Fenton reaction were proposed.

• Journal of Korea Foundry Society
• /
• v.13 no.4
• /
• pp.350-358
• /
• 1993

Aluminum base composites reinforced with various amount of SiC particles and Mg contents have been investigated by different fabrication method for twenty-years. In this paper, how the decomposition and dissolution behaviors of $SiCp(20{\mu}m)$ in the melt of Al composites arised was studied. As the results, the decomposition and dissolution of SiCp into the melt of Al composites increased with increase of the temperature above $720^{\circ}C$, and holding time at a given melting temperature. Because SiC is thermodynamically unstable in this Al-SiCp composite at temperature above the liquidus, SiCp dissolves and reacts with Al in matrix to form $Al_4C_3$ according to following chemical equation $4Al+3SiC{\rightarrow}Al_4C_3+3Si$, Si decomposed and dissolved from SiCp increases Si content of matrix, while liquidus temperature of matrix decrease with increase of SiC content in matrix. The hardness of SiCp decreased with increase of the melting temperature, the hardness of the matrix /particle interface increased with increase of the melting temperature due to increase of the $Mg_2Si$ and $Al_4C_3$ intermetallic compounds, etc.