• 폴리머
• /
• 제37권3호
• /
• pp.308-315
• /
• 2013

본 연구에서는 실리카 나노 입자의 표면개질을 위해 실란 커플링제인 bis[3-(triethoxysilylpropyl)]tetrasulfide(TESPT)를 사용하여 표면개질 반응을 수행하였다. 반응온도, 반응시간 및 TESPT 투입량의 변화가 실리카 표면개질 반응에 미치는 영향을 Fourier transform infrared spectroscopy(FTIR), thermogravimetric analysis(TGA), elemental analysis(EA) 및 고체 $^{13}C$ 및 $^{29}Si$ cross-polarization magic angle spinning(CP/MAS) nuclear magnetic resonance spectroscopy(NMR)를 사용하여 분석하였다. 실리카 대비 투입되는 TESPT의 투입량을 증가시킬수록 $3746cm^{-1}$의 실리카의 고립 실란올(isolated) 피크의 세기는 줄어들었고, $2938cm^{-1}$의 TESPT의 $-CH_2$기에 의한 피크의 세기는 증가하였다. 또한 TESPT로 표면 개질된 실리카가 SBR 복합체의 기계적 물성에 미치는 영향과 SBR 기질 내에서 실란 커플링제로 표면 처리된 실리카의 분산정도를 universal testing machine(UTM)과 field emission scanning electron microscope(FE-SEM)를 이용하여 각각 측정하였다. 실험 결과 개질되지 않은 본래(pristine) 실리카를 20 phr(parts per hundred of rubber) 넣은 SBR 나노복합체에 비해 개질된 실리카 20 phr를 넣은 SBR 복합체의 인장강도는 5.65에서 9.38 MPa, 100% modulus는 1.62에서 2.73 MPa로 각각 증가하였으나, 파괴점 신장률은 349.6에서 298.9%로 조금 감소되었으며, SBR 기질 내의 실리카 분산성은 TESPT로 처리된 실리카가 본래 실리카에 비해 우수하였다.

• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.181-186
• /
• 2011

본 연구에서는 실리카 나노 입자의 표면 개질을 위해 실란 커플링제인 3-(trimethoxysilyl)propylmethacrylate(MPS) 를 사용하여 표면 개질 반응을 수행하였다. 용매의 pH, MPS의 가수 분해 반응시간, 표면 개질 반응시간 및 실리카 표면의 실라놀기(Si-OH)에 대한 MPS의 몰 비를 변화하여 각각의 반응조건이 실리카 표면개질 반응에 미치는 영향을 연구하였다. 개질반응 후 Fourier Transform Infrared Spectroscopy(FTIR), 원소분석(EA) 및 고체 상태 cross-polarization magic angle spinning(CP/MAS) Nuclear Magnetic Resonance Spectroscopy(NMR)법을 사용하여 표면이 개질된 실리카 입자들의 분석을 수행하였다. 연구 결과 용매의 pH가 4.5일 때 MPS가 단량체 형태로 실리카 표면의 실라놀기와 반응하고 이외의 pH에서는 MPS가 이량체, 삼량체 혹은 사량체의 올리고머 형태로 실리카의 실라놀기와 반응함이 우세함을 나타내었다. 가수분해반응 시간을 30분에서 90분으로 증가시키면 MPS가 올리고머 형태로 실리카 표면의 실라놀기와 반응하는 것이 우세하고, 투입한 MPS 몰 비의 증가도 MPS가 올리고머 형태로 실리카 표면의 실라놀기와 반응하는 것이 우세함을 나타내었다.

• 폴리머
• /
• 제38권2호
• /
• pp.257-264
• /
• 2014

본 연구에서는 나노크기의 실리카 입자를 2차 아미노기를 가지는 dipodal 형태의 실란커플링제인 bis[3-(trimethoxysilyl)propyl]ethylenediamine(BTPED)으로 표면 개질한 후, 실리카에 도입되는 2차 아미노기인 N-H기와 마이클 부가 반응이 가능한 acrylate기를 가지는 3-(acryloyloxy)-2-hydroxypropyl methacrylate(AHM)로 표면 처리를 하여 중합 반응성 methacrylate기를 도입하는 연구를 수행하였다. 1 분자에 2차 아미노기를 2개 가지는 BTPED와 마이클 부가 반응성이 있는 acrylate기와 부가 반응성이 없는 methacrylate기를 각각 1개씩 가지는 AHM을 사용하여 BTPED와 AHM의 투입량 및 개질 반응 시간의 변화가 실리카 표면의 methacrylate기 도입에 미치는 영향을 Fourier transform infrared spectroscopy(FTIR), elemental analysis(EA)와 액체 및 고체 상태 cross polarization magic angle spinning(CP/MAS) nuclear magnetic resonance spectroscopy(NMR)법을 사용하여 분석하였다. 실리카 표면에 BTPED 를 도입하는 반응은 1시간 내에, BTPED로 개질된 실리카의 N-H기에 대한 AHM의 acrylate기와의 마이클 부가 반응에 따른 methacrylate기 도입은 2시간 내에 반응이 각각 완결됨을 확인하였다. 또한 BTPED로 개질된 실리카에 대하여 투입되는 AHM의 몰 비가 증가할수록 N-H기와 acrylate기의 마이클 부가 반응으로 인한 methacrylate기의 도입이 증가하였으며 이는 AHM을 도입했을 때 나타나는 FTIR 스펙트럼의 C=O 피크 면적 변화로 확인하였다. 위의 결과를 EA 및 고체 상태 $^{13}C$ 및 $^{29}Si$ NMR 분석으로도 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.35-40
• /
• 2002

Photoreaction of guest organic anions in layered organic-inorganic hybrid materials was investigated. The layered hybrids were synthesized by an anion-exchange reaction of $[LiAl_2(OH)_6]Cl{\cdot}yH_2O$ layered double hydroxide with aqueous (Z,Z)- and (E,E)-muconates under inert atmospheric condition, to give new organicinorganic hybrids of $[LiAl_2(OH)_6]_2[(Z,Z)-C_6H_4O_4]{\cdot}zH_2O$ and $[LiAl_2(OH)_6]_2[(E,E)-C_6H_4O_4]{\cdot}H_2O$, respectively. The basal spacings calculated by XRPD of intercalates indicate that muconate anions have almost vertical arrangements against the host $[LiAl_2(OH)_6]^+$ lattices in the interlayer of organic-inorganic hybrid materials. When UV light was irradiated on the suspension of $[LiAl_2(OH)_6]_2[(Z,Z)-C_6H_4O_4]{\cdot}zH_2O$, the (Z,Z)-muconate anions of the gallery space of hybrids were polymerized in the aqueous media while it was isomerized into more stable (E,E)-muconate in the methanollic suspension in the presence of catalytic amount of molecular iodine. All the products were characterized using elemental analysis, TGA, XRPD, FT-IR, $^1H$ NMR and $^{13}C$ CP-MAS NMR.

• 분석과학
• /
• 제8권4호
• /
• pp.493-498
• /
• 1995

PAZO-6 is a new combined type liquid crystalline polymers (LCP) which has two types of mesogens combined non linearly. Ordering of branch mesogen azo group, in PAZO-6 is an important parameter to observe as well as the substitution effect on the backbone. The related small molecules sllch as monomers as well as the polymer itself are studied by solid state NMR techniques. Preliminary $^{13}C$ CP/MAS (cross polarization/ magic angle spinning) spectral results suggest that the azo groups in the monomers are not aligned with themselves. Azo groups in the monomers seem to be poorly ordered between well ordered p-phenylene terephthalate moeities. Similar disordering tendency of the azo group in PAZO-6 is deduced from the overall aromatic carbon peak positions which are not much different from those of the monomer.

• Macromolecular Research
• /
• 제15권7호
• /
• pp.633-639
• /
• 2007

A variety of NMR techniques were applied to the micro-chemical structural characterization of polyanilines prepared via an efficient synthetic method in a self-stabilized dispersion medium in which the polymerization was conducted in a heterogeneous organic/aqueous biphasic system without any stabilizers. Here, the monomer and growing polymer chain were shown to function simultaneously as a stabilizer, imparting compatibility for the dispersion of the organic phase, and as a form of flexible template in an aqueous reaction medium. Polymerizations predicated on this concept generated polyanilines with a low defect content: solution state $^{13}C-NMR$ and solid $^{13}CDD/CP/MAS$ spectroscopy indicated that the synthesized HCPANi and its soluble derivative, HCPANi-t-BOC, evidenced distinctly different NMR spectra with fewer side peaks, as compared to conventionally prepared PANis, and the complete structural assignments of the observed NMR peaks could be determined via the combination of both 1D and 2D techniques. Ortho-linked defects in HCPANi were estimated to be as low as 7%, as shown by a comparison of the integration of the carbonyl carbon resonance peaks.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.43-50
• /
• 2012

The crystallinity index is an important characteristic of cellulose. The crystallinity value is different depending on the adopted instrument. In this study, we determined a crystallinity index of cotton and wood celluloses using wide-angle X-ray scattering (WAXS), powder X-ray diffractometer (PXRD), and cross polarization/magic angle spinning solid-state $^{13}C$ nuclear magnetic resonance spectroscopy (CP/MAS solid-state $^{13}C$ NMR). The specimen was prepared in forms of powder, sheet and pallet. With the comparison of the obtained crystallinity indices of the cellulose, the effects of the analysis instrument, the sample preparation and analysis method were investigated. Among three instruments, the crystallinity indices by PXRD and NMR had a good relationship and reproducibility, and WAXS gave the crystallinity index with poor reproducibility. In the case of analysis methods of crystallinity indices, the Segal method showed higher value than that of the Ruland-Vonk method. We expect that this study would be applicable to evaluate the crystallinity index of various cellulose materials with accuracy and reproducibility.

• 한국자기공명학회논문지
• /
• 제26권4호
• /
• pp.51-58
• /
• 2022

The baseline flattened NMR spectrum has been achieved by several methodologies including pulse manipulation with a series of phase cycling. The background signal inherent in the probe is also main source of baseline distortion both in solution and solid NMR. The simple direct polarization with 90° pulse flipping the magnetization from the z-axis onto the receiver coil requires the strong rf pulse enough to encompass the wide frequency range to excite the resonance of interest nuclei. Albeit the perfect polarization 90° pulse, the signal from the unwanted magnetic fields such as background signal can not be completely suppressed by suitable phase cycling. Moreover, slowly baseline wiggling signal from the low 𝛾 nuclei is not easy to eliminate with multiple pulse manipulation. So there is still need to contrive the new scheme for that purpose in an adroit manner. In this article new triple pulse excitation schemes for TIP and modified DEPTH pulse sequence are analytically examined in terms of arbitrary phase and flip angle of pulse. The suitable phase cycling for these pulse trains is necessary for the good sensitivity and resolution of the spectrum. It is observed that the ¹³C sensitivity TIP experiment is almost equal to the CP/MAS with modified DEPTH sequence, both of which are applicable to both solid and solution state NMR.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2747-2752
• /
• 2013

Surface modification of colloidal silica nanoparticles without disrupting the electric double layer of nanoparticles is a major challenge. In the work, silane was employed to modify colloidal silica nanoparticles without inducing bridge flocculation obviously. The effect of pH value of the silica sol, the amount of silane in feed, and reaction temperature on the graft amount and the final size of modified particles was investigated. The increased weight loss by TG and the appearance of $T_2$ and $T_3$ except for $Q_2$ and $Q_3$ signals by CP/MAS $^{29}Si$ NMR of the modified samples verified the successful grafting of silane. The graft amount reached 0.57 mmol/g, which was slightly lower than theory value, and the particle size remained nearly the same as unmodified particles for acidic silica sol at the optimum condition. For alkaline silica sol after modification, aggregates composed of several nanoparticles connected together with silane moleculars as the bridge appeared.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권3호
• /
• pp.166-170
• /
• 2004

Gluconobacter oxydans that produces the cellulose was isolated. In order to confirm the chemical features of cellulose, various spectrophtometeric analysis were carried out using electron microscopy, X-ray diffractogram, and CP/MAS $\^$13/C NMR. The purified cellulose was found to be identical to that of Acetobacter xylinum. For effective production of cellulose, the various carbon and nitrogen sources, mixture of calcium and magnesium ions, and biotin concentration were investigated in flask cultures. Among the various carbon sources, glucose and sucrose were found to be best for the production of cellulose, with maximum concentration of 2.41 g/L obtained when a mixture of 10 g/L of each glucose and sucrose were used. With regard to the nitrogen sources, when 20 g/L of yeast extract was used, the maximum concentration of bacterial cellulose was reached. The concentration of cellulose was increased with mixture of 2 mM of each Ca$\^$2+/ and Mg$\^$2+/. The optimum biotin concentration for the production of cellulose was in the range of 15 to 20mg/L. At higher biotin concentration (25-35mg/L). the bacterial cellulose production was lower.