• Tuberculosis and Respiratory Diseases
• /
• v.58 no.4
• /
• pp.392-398
• /
• 2005

Background : The last national tuberculosis survey was carried out in 1995. In 2000, the KTBS(Korean Tuberculosis Surveillance System) replaced a previous national survey. However, the KTBS does not show some of the important epidemiological indexes such as the prevalence of positive tuberculosis or the drug resistance rate. The aim of this study was to compare the clinical features of pulmonary tuberculosis patients admitted to a national tuberculosis hospital in 1995 and 2002. From this study, the authors expect to estimate the trend of the clinical features of tuberculosis in Korea even though it can not represent the Korean tuberculosis situation as a whole. Method : A cross sectional analysis of the clinical features for 331 pulmonary tuberculosis in-patients admitted to the National Masan Tuberculosis Hospital as of Dec. 2002, was carried out and these results were compared with those reported in 1995. Results : In comparison with the data reported in 1995, the mean age was increased by 3.6 years ($44.1{\pm}14.6$ vs $47.7{\pm}16.4$, p<0.01). The number of past tuberculosis history and used anti-tuberculous drugs prior to admission decreased from $2.0{\pm}1.7$ and $6.1{\pm}2.3$ to $1.7{\pm}1.8$ and $4.6{\pm}3.6$(p<0.05, p<0.001), respectively. While the resistance rate for anti-tuberculous drugs was similar (81.0% vs 77.6%), the initial resistance rate(10.5% vs 21.4%) and initial MDR rate(2.4% vs 16.5%) increased significantly(p=0.012, p=0.001, respectively). In 1995, the public health communities were in charge of approximately 65% of newly diagnosed tuberculosis cases, but this reduced to 40.5% in 2002(p<0.001). Conclusion : The existing national TB program (NTP) needs to be revised and strengthened in order to cope with the unfavorably changing situation of the domestic TB problem because the number of TB patients has not decreased and the initial resistance rate has increased greatly. Furthermore, the public and private sectors should cooperate each other to control the TB problem effectively because the private sector is now managing more than half of the TB patients.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.4
• /
• pp.375-384
• /
• 2005

Background and Aims : Pre-induction of heat shock protein 70 (HSP70) is known to effectively attenuate the lipopolysaccharide (LPS)-induced inflammatory response in lung tissue. However, it is unclear if HSP70 induction after LPS exposure attenuates the subsequent LPS-induced inflammatory response in alveolar epithelial cells. This study examined the effects of HSP70 induction after LPS exposure on the IL-6 production and the cell viability after a subsequent LPS challenge in murine alveolar epithelial cells, and investigated whether or not HSP70 itself may be involved in those effects. Methods : Murine alveolar epithelial cells were cultured and divided into two groups; the Non-Pre-LPS group without a LPS pre-treatment and the Pre-LPS group with a LPS pre-treatment. Each group was subdivided into the following four subgroups: subgroup C (control), subgroup Q (quercetin), subgroup HSP70 (HSP70 induction), and subgroup HSP70-Inh (HSP70 inhibition). HSP70 expression, which was induced by sodium arsenite and inhibited by quercetin, was analyzed by western blot analysis. The IL-6 levels in the culture supernatant were measured by ELISA, and the cell viability was measured using a simplified MTT assay. Results : The IL-6 levels were lower in subgroup HSP70 than in subgroup C (P<0.01), and were higher in subgroup HSP70-Inh than in subgroup HSP70 in both the Non-Pre-LPS and Pre-LPS groups (P<0.05, P<0.01). The cell viability tended to decrease in the Pre-LPS group compared with the Non-Pre-LPS group. While the cell viability was higher in subgroups Q, HSP70, and HSP70-Inh than in subgroup C in the Non-Pre-LPS group (P<0.05, P<0.05, P<0.01), there was no difference in cell viability among the subgroups in the Pre-LPS group. Conclusion : HSP70 induction after a LPS pre-treatment in murine alveolar epithelial cells inhibits the subsequent LPS-induced IL-6 production without affecting the cell viability, and HSP70 by itself may play an important role in this proccess.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.177-184
• /
• 2020

Purpose: The purpose of this study was to compare and evaluate the tensile bond strength of chairside reline resin to denture base resin fabricated by different methods (subtractive manufacturing, additive manufacturing, and conventional heat-curing). Materials and methods: Denture base specimens were fabricated as cuboid specimens with a width of 25 mm × length 25 mm × height 3 mm by subtractive manufacturing (VITA VIONIC BASE), additive manufacturing (NextDent Base) and conventional heat-curing (Lucitone 199). After storing the specimens in distilled water at 37℃ for 30 days and drying them, they were relined with polyethyl methacrylate (PEMA) chairside reline resin (REBASE II Normal). The subtractive and additive manufacturing groups were set as the experimental group, and the heat-curing group was set as the control group. Ten specimens were prepared for each group. After storing all bound specimens in distilled water at 37℃ for 24 hours, the tensile bond strength between denture bases and chairside reline resin was measured by a universal testing machine at a crosshead speed of 10 mm/min. The fracture pattern of each specimen was analyzed and classified into adhesive failure, cohesive failure, and mixed failure. Tensile bond strength, according to the fabrication method, was analyzed by 1-way ANOVA and Bonferroni's method (α=.05). Results: Mean tensile bond strength of the heat-curing group (2.45 ± 0.39 MPa) and subtractive manufacturing group (2.33 ± 0.39 MPa) had no significant difference (P>.999). The additive manufacturing group showed significantly lower tensile bond strength (1.23 ± 0.36 MPa) compared to the other groups (P<.001). Most specimens of heat-curing and subtractive manufacturing groups had mixed failure, but mixed failure and adhesive failure showed the same frequency in additive manufacturing group. Conclusion: The mean tensile bond strength of the subtractive manufacturing group was not significantly different from the heat-curing group. The additive manufacturing group showed significantly lower mean tensile bond strength than the other two groups.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.605-616
• /
• 2004

Subinhibitory concentrations (sub-MICs) refer to concentrations below minimum inhibitory concentrations (MICs). The antimicrobial agents may be present at relatively high concentration, at least higher than bacterial MIC and thereafter be deserted off a surface and function at sub-MICs, perhaps by interfering with bacterial metabolism. Consequently, the aim of this study was to determine the effects of growth, in the presence of sub-MICs of antimicrobial agents, on the cell surface properties and virulence factors of mutans streptococci and to investigate the efficacy of a chemical approach in vitro. Streptococcus mutans Ingbritt and Streptococcus sobrinus 6715-7 were used. Eight antimicrobial agents (Sanguinaria extract;SG, Chlorhexidine digluconate;CHX, Fluoride;F, Propolis;PP, Hydrogen peroxide;HP, Triclosan;TC, Sodium dodecyl sulfate;SDS Cetylpyridinium chloride; CC) were diluted serially in broth to determine MICs and to compare the growth rate, acid production, hydrophobicity, adhesion activity to saliva coated hydroxyapatite, glucan synthesis and cellular aggregation of experiment groups (in the presence of sub-MICs) with those of control (in the absence of antimicrobial agents). Sub-MICs of antimicrobial agents affected the growth of cells, hydrophobicity, and adhesion of bacteria to saliva coated hydroxyapatite and glucan synthesis. They also resulted in a significant reduction in pH after 12 hours (p<0.05). By cells pretreated with proteinase K, either the aggregation induced by antimicrobial agents was completely inhibited or the aggregation titers were markedly increased. According to the results of the present study, each antimicrobial agent at sub-MICs could affect similar as its known action mechanism and could continually inhibit cariogenic bacteria at such concentrations. Thus, the use of these antimicrobial agents would be one of the effective methods to prevent dental caries.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.416-426
• /
• 2005

Intravenous sedation have many advantages of rapid onset and recovery, ability of control sedation levels and duration through titration. Midazolam is most commonly used intravenous medication for sedation in pediatrics, endoscopy, oncologic procedures and so on. But in dentistry, midazolam intravenous sedation is usually for adult, and there are few reports for children. Todays, children who need sedation become more and older, intravenous sedation technique is going a matter of concern in pediatric dentistry. The purpose of this paper is to evaluate the efficacy of sedation and clinical success for different initial dosage of midazolam in intravenous sedation for pediatric dental patients. 16 healthy children (male 10, female 6), mean age $54.7{\pm}10.7$ months, who needed at least two separate treatment visits requiring local anesthesia were chosen for this study. Every children were taken 0.3mg/kg, maximum 5mg of midazolam by intramuscular route, and then 30~50% $N_2O-O_2$ for 10 minutes was given. On every visits, one of the following 2 different initial dosage was given by intravenous route : (1) Group I : 0.1mg/kg Midazolam (2) Group II : 0.2mg/kg Midazolam. Additional dosage was half of the first dose. Physiologic parameters (oxygen saturation, heart rate, respiratory rate, end-tidal carbon dioxide pressure) was recorded by ten procedure steps. Behavior was videotaped and rated using Ohio State University Behavioral Rating Scale and Automated Counting System by one investigator, blind to administered dosage. After the treatment, operator evaluated the clinical success. Physiologic parameters were stable and within normal range during treatment in both groups. The analyzed sedative effect, in behavioral evaluation, ratio of favorable Quiet was higher in group II, and clinical success rate of group II was better than group I. Induction time was rapid in group II, and recovery time was rapid in group I. And there was no statistically difference between two groups in every results.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.73-81
• /
• 2010

The objective of this study was to evaluate the color stability of new silorane-based composite resin compared with methacrylate-based composite resins after immersion in 3 staining solutions. One silorane-based composite(Filtek P90) and 3 methacrylate -based composites(Filtek Z250, Filtek Z350, Tetric Ceram) were evaluated. Twenty disk-shaped specimens($10{\times}2mm$) of each of 4 composite resins were prepared. The specimens were then divided into 4 groups of 5 specimens each and immersed in 3 staining solutions( coffee, red wine, curry solution) or distilled water(control) for 28-day test period. Color of the specimens was measured with a spectrophotometer(Color Eye 7000A) using CIE $L^*a^*b^*$ color space relative to CIE standard illuminant D65 at baseline, 1day, 3days, 7days, 14days, 21days and 28days after staining. The color differences( ${\Delta}{E^*}_{ab}$) were calculated. The results were obtained as follows ; 1. The mean color changes(${\Delta}{E^*}_{ab}$) of the composites were greatest in curry solution, then red wine, coffee and distilled water, in decreasing order. 2. The mean color changes(${\Delta}{E^*}_{ab}$) of the composites were greatest in Z350, Z250, Tetric Ceram and P90, in decreasing order.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.1-12
• /
• 2010

The aim of this study was to evaluate the preventive effect of commercially available anticariogenic products, specifically, the tooth cream containing Casein phosphopeptide-amorphous calcium phosphate(CPP-ACP), fluoride varnish and low-level fluoride mouthrinse on enamel erosion induced by carbonated beverage in a short period of time. Enamel specimens were treated as follows and were then kept in artificial saliva for 24 hours followed by further processing by alternately soaking them in Cola beverage and in distilled water for 1 minute each five times. Group 1: control group (no treatment) Group 2: tooth cream with CPP-ACP Group 3: fluoride varnish (1,000 ppm F) Group 4: low-level fluoride mouthrinse (227 ppm F) Group 5: fluoride varnish + tooth cream with CPP-ACP Group 6: low-level fluoride mouthrinse + tooth cream with CPP-ACP Microhardness and erosion depth were measured and the mineral loss of each specimen was evaluated by measuring the volumetric fluorescence change(${\Delta}Q$) against the stable fluorescent grid using quantitative light-induced fluorescence(QLF). The experiment lasted for 6 days repeated each day. The results were as follows: 1. The microhardness was increased as follows: Group $1{\leq}2{\leq}4$<6<$3{\fallingdotseq}5$. 2. The mean erosion depth was increased as follows: Group $5{\fallingdotseq}3$<6<$4{\fallingdotseq}2{\fallingdotseq}1$. 3. The ${\Delta}Q$ was increased as follows: Group $1{\fallingdotseq}2{\leq}4{\leq}6{\leq}3{\fallingdotseq}5$. The decrement of ${\Delta}Q$ was similar between group 1 and 2, group 4 and 6 and group 3 and 5. 4. The ${\Delta}Q$ showed positive correlation with microhardness (r=0.96, p<0.05), while it was negatively correlated to erosion depth (r=-0.96, p<0.05).

• Journal of The Korean Association For Science Education
• /
• v.22 no.2
• /
• pp.299-313
• /
• 2002

A web-based instruction program for the enriched course under the 7th Revised National Curriculum of Biology in Korea was developed and the application effects to learners were analyzed. For the development of the web-based instruction program, five topics of biology from the enriched courses through 7th to 10th grades in the middle and high school science textbooks were selected and modulated with interrogative sentences. Each topic of programs was divided into four activity sections according to the learners' activity procedures supplemented with explanations and evaluations. Each activity was hyper-linked to multi-layers and animations. Further, a virtual experiment was also developed and an evaluation section designed by Java Script was attached. Among five topics, one topic of 'Reproduction and development' at 9th grade level was selected to examine the effects on students' learning. Among 247 9th grade students in the research subject school, only 67 students were able to accessible to ultra-thin Internet cables with their computers at home and they became an experimental group. A control group was assigned to those who are similar level of school science achievement to the experiment group and did not use the web-based program. It was found that most of 9th grade students are able to use Internet at home, however, they do not prefer to use Internet for homework or task project. Rather, most of students used Internet for e-mail or information navigation. Students used internet to solve problems of science and perceived the benefits of Internet for science learning. However, there are not many students to utilize Internet for science homework or task project. Students expressed that they do not prefer to use a web-based learning program for science learning due to lack of interests in science. The effects on students who studied with this program appeared to be significantly high compared to those who did not study with this program. Students who studied with this program positively evaluated this program, in particular, they enjoyed animation effect and virtual experiments. It was concluded that a web-based program for science learning should be developed and distributed through Internet in an attractive and interesting format for students. It was also concluded that various web-based programs for science learning with animation effect and virtual experiments should be developed to increase students' interests in science as well as to improve students' science achievements.

• Journal of Radiation Protection and Research
• /
• v.32 no.2
• /
• pp.65-69
• /
• 2007

The effects of bamboo (Phyllostachys nigra var. henenis Strapf) leaf extract (BLE) on the changes of ultraviolet (UV) light B radiation-induced apoptotic sunburn cell (SBC) and epidermal ATPase-positive dendritic cell (DC) in SKH1-hr or ICR mouse were investigated. The mice were treated with UVB ($200mJ/cm^2$) and were sacrificed 24 hours later. BLE (50 mg/kg of body weight) or vehicle (saline) was given i.p. at 36 and 12 hours before irradiation, and 30 minutes after irradiation. BLE cream (0.2%) or cream base (vehicle) was also topically treated at 24 hours and 15 minutes before irradiation, and immediately after irradiation. The skin of SKH1-hr mouse prepared from the back of untreated mice exhibited about 0.3 SBC/cm length of epidermis, and 24 hours after UV irradiation, the applied areas show an increased number of SBCs. But the frequency of UVB-induced SBC formation was significantly reduced by intraperitoneal injection (59.0%) and topical application (31.8%) of BLE extract. The numbers of DC in normal ICR mouse were $628.00{\pm}51.56\;or\;663.20{\pm}62.58\;per\;mm^2$ of ear epidermis. By 1 day after UVB treatment, the number of ATPase-positive $cells/mm^2$ were decreased by 39.0% or 27.1% in i.p. or topical application group with vehicle. The frequency of UVB ($200mJ/cm^2$)-induced DC decrease was reduced by treatment of BLE as 25.7% in i.p. group and 3.2% in topical application group compared with the irradiation control group. The results presented herein that BLE administration could reduce the extent of skin damages produced by UVB.

• Journal of Radiation Protection and Research
• /
• v.33 no.2
• /
• pp.61-65
• /
• 2008

Objective: To reduce urinary side effects in prostate cancer patients receiving radiation, patients were asked to drink certain amount of water to maintain bladder volume constant and the bladder volumes were measured weekly using ultrasound scanner. Materials and Methods: Twenty-six patients with prostate cancer who received radiation between December 2002 and August 2007 were enrolled in this study. Thirteen patients were enrolled in experimental group. These patients were asked to drink 450 cc of water, one hour prior to simulation, CT scan, and treatment. The other thirteen patients were given no information about bladder filing. Bladder, prostate, and rectum were contoured on CT and volumes were calculated. 3D conformal treatment planning was performed and effective volumes of bladder were calculated when a prescription dose of 70.2 Gy was delivered. For the patients in experimental group, bladder volumes were measured weekly using ultrasound scanner for 6-8 weeks and the bladder volume variations were analyzed. Results: Average bladder volumes and standard deviations obtained at CT scanning were $283.5{\pm}114.0\;cc$ (40%) and $181.2{\pm}120.1\;cc$ (66%) in experimental and control groups, respectively. Although it was not statistically significant, there was correlation between the bladder volumes measured from CT and ultrasound. The volumes measured using ultrasound scanner were 62% lower than the volumes using CT images on average. There was significant variations in volumes measured weekly for 6-8 weeks. It ranged between 33 - 75 %. Conclusion: Our results showed that it is possible to obtain larger bladder volume if they are asked to drink certain amount of water prior to CT scan. However, patients were unable to maintain constant bladder volumes over the 6-8 weeks of treatment period although they were asked to drink constant amount of water.