• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.95-103
• /
• 2013

PURPOSES : To investigate the fundamental characteristics of blast-furnace slag mortar that was hardened with activating chemicals to capture and sequester carbon dioxide. METHODS : Various mix proportions were considered to find an appropriate stregnth development in regards with various dosages of activating chemicals, calcium hydroxides and sodium silicates, and curing conditions, air-dried, wet and underwater conditions. Flow characteristics was investigated and setting time of the mortar was measured. At different ages of 3, 7 and 28days, strength development was investigated for all the mix variables. At each age, samples were analyzed with XRD. RESULTS : The measured flow values showed the mortar lost its flowability as the activating chemicals amount increased in the scale of mole concentration. The setting time of the mortar was relatively shorter than OPC mortar but the initial curing condition was important, such as temperature. The amount of activating chemicals was found not to be critical in the sense of setting time. The strength increased with the increased amount of chemicals. The XRD analysis results showed that portlandite peaks reduced and clacite increased as the age increased. This may mean the $Ca(OH)_2$ keeps absorbing $CO_2$ in the air during curing period. CONCLUSIONS : The carbon capturing and sequestering activated blast-furnace slag mortar showed successful strength gain to be used for road system materials and its carbon absorbing property was verified though XRD analysis.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.449-458
• /
• 2015

The compilation of a flood hazard map is an efficient technique in managing areas at risk of flooding in the case of a dam-break. A scenario-based numerical modeling approach is commonly used to compile a flood hazard map related to dam-break and to determine the model parameters that capture peak discharge, including breach formation and progress, which are important in the modeling method. This approach might be considered less reliable if an existing model is used without local validation. In this study, a dam-break model is linked to a routing model to identify flood-risk areas in the case of failure of the Sandae Reservoir Gyeongju, Gyeongbuk. Model parameters are extracted from a DEM, and maps of land use and soil texture. The simulation results are compared with on-site investigations in terms of inundation and depth. The model reproduces the inundation zone with reasonable accuracy.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6837-6842
• /
• 2014

Background: Northern Thailand is a region with a high cervical cancer incidence. Combined high-risk HPV (hrHPV) DNA testing and cytology (co-testing) has increasingly gained acceptance for cervical cancer screening. However, to our knowledge, data from a population-based screening using co-testing have not been available in this region. This study therefore aimed to evaluate the performance of cytology and hrHPV test in women in northern Thailand. Materials and Methods: Cervical samples were collected for hybrid capture 2 (HC2) testing and liquid-based cytology from women aged 30 to 60 years who were residents in 3 prefectures of Chiang Mai in northern Thailand between May and September 2011. Women with positive cytology were referred to colposcopy, while women with positive for HC2 only were followed for 2 years. Results: Of 2,752 women included in this study, 3.0% were positive in both tests, 4.1% for HC2 only, and 1.3% had positive cytology only. At baseline screening, positive HC2 was observed in 70.6% among cytology-positive women compared with 4.3% among cytology-negative women. The prevalence of positive HC2 or cytology peaked in the age group 35-39 years and was lowest in the age group 55-60 years. High-grade squamous intraepithelial lesion or worse lesions (HSIL+) were histologically detected in 23.5% of women with positive baseline cytology and in 9.8% of women with positive baseline HC2 only on follow-up. All women with histologic HSIL+ had positive baseline HC2. Conclusions: The hrHPV test is superior to cytology in the early detection of high-grade cervical epithelial lesions. In this study, the prevalence of histologic HSIL+ on follow-up of women with positive hrHPV test was rather high, and these women should be kept under careful surveillance. In northern Thailand, hrHPV testing has a potential to be used as a primary screening test for cervical cancer with cytology applied as a triage test.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.2
• /
• pp.181-191
• /
• 2024

In the realm of cement manufacturing, concerted efforts are underway to mitigate the emission of greenhouse gases. A significant portion, approximately 60%, of these emissions during the cement clinker sintering process is attributed to the decarbonation of limestone, which serves as a fundamental ingredient in cement production. Prompted by these environmental concerns, there is an active pursuit of alternative technologies and admixtures for cement that can substitute for limestone. Concurrently, initiatives are being explored to harness technology within the cement industry for the capture of carbon dioxide from industrial emissions, facilitating its conversion into carbonate minerals via chemical processes. Parallel to these technological advances, economic growth has precipitated a surge in construction activities, culminating in a steady escalation of construction waste, notably waste concrete. This study is anchored in the innovative production of calcium silicate cement clinkers, utilizing finely powdered waste concrete, followed by a thorough analysis of their mineral phases. Through X-ray diffraction(XRD) analysis, it was observed that increasing the substitution level of waste concrete powder and the molar ratio of SiO₂ to (CaO+SiO₂) leads to a decrease in Belite and γ-Belite, whereas minerals associated with carbonation, such as wollastonite and rankinite, exhibited an upsurge. Furthermore, the formation of gehlenite in cement clinkers, especially at higher substitution levels of waste concrete powder and the aforementioned molar ratio, is attributed to a synthetic reaction with Al₂O₃ present in the waste concrete powder. Analysis of free-CaO content revealed a decrement with increasing substitution rate of waste concrete powder and the molar ratio of SiO₂/(CaO+SiO₂). The outcomes of this study substantiate the viability of fabricating calcium silicate cement clinkers employing waste concrete powder.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.6093-6097
• /
• 2015

Background: HPV DNA testing has been recently introduced as an adjunct test to cytology in the follow-up of patients after treatment for cervical lesions using the loop electrosurgical excision procedure (LEEP). The aim of this study was to evaluate the role of HPV testing in the detection of persistent or recurrent disease after LEEP in patients with cervical epithelial lesions in northern Thailand. Materials and Methods: Patients who underwent LEEP as a treatment for histological low-grade (LSIL) or high-grade squamous intraepithelial lesion (HSIL) or worse at Chiang Mai University Hospital between June 2010 and May 2012 were included. Follow-ups were scheduled at 6-month intervals and continued for 2 years using co-testing (liquid-based cytology and Hybrid Capture 2 [HC2]) at 6 months and 24 months and liquid-based cytology alone at 12 and 18 months. Results: Of 98 patients included, the histological diagnoses for LEEP included LSIL in 16 patients, and HSIL or worse in 82 patients. The LEEP margin status was negative in 84 patients (85.7%). At follow-up, 10 patients (10.2%) had persistent/recurrent lesions; 4 among LSIL patients (25.0%) and 6 in the group with HSIL or worse (7.3%). Only 2 of 82 patients (2.4%) with HSIL or worse diagnoses had histological HSIL in the persistent/recurrent lesions. Using histologically confirmed LSIL as the threshold for the detection of persistent/recurrent disease, cytology had a higher sensitivity than HC2 (90.0% versus 70.0%). At the 6-month follow-up appointment, combined cytology and HC2 (co-testing) had a higher sensitivity in predicting persistent/recurrent disease (80.0%) compared with that of cytology alone (70.0%) and HC2 (50.0%). Conclusions: After LEEP with a negative surgical margin, the rate of persistent/recurrent lesions is low. The addition of HPV testing at the 6-month visit to the usual cytology schedule may be an effective approach in the follow-up after LEEP.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.17-24
• /
• 2021

The development of a new sorbent for carbon dioxide depends on several factors, such as fast adsorption/absorption velocity, hydrophobicity, and lower regeneration temperature than commercial sorbent. In this study, aminosilane grafted activated carbon was synthesized to capture CO2. Methyltrimethoxysilane (MTMS) and 3-aminopropyl-triethoxysilane (APTES) were used as the grafting precursor of the amine functional group. The APTES grafting activated carbon showed higher sorption property than MTMS used one. The characteristics of the separation mechanism of carbon dioxide were examined by measuring the adsorption capacity according to temperature and carbon dioxide partial pressure. The absorption capacity of carbon dioxide was similar to amine grafting activated carbon and activated carbon at 25℃, but amine-grafted activated carbon was higher at 75℃. The amine functional group-grafted activated carbon showed higher absorption capacity than activated carbon with a 1% carbon dioxide partial pressure. Aminosilane grafting of activated carbon was chemically absorbed but also showed the characteristics of physical adsorption. The reforming activated carbon with an amine functional group grafted solid absorption/adsorption sorbent would significantly impact the material engineering industry and carbon dioxide adsorption process. The functionalized sorbent is a high-performance composite material. The developed sorbent may have applications in other industrial processes of absorption/adsorption and separation.

• Biomolecules & Therapeutics
• /
• v.6 no.3
• /
• pp.289-295
• /
• 1998

The bioequivalence of two nilvadipine products was evaluated in 16 normal male volunteers (age 22-32 yr, body weight 57-80 kg) following sidle oral dose. Test product was Overca $l_{R}$ tablet (Choong-Wae Pharm. Corp., Korea) and reference product was Nivadi $l_{R}$ tablet (Hyundai Pharm. Corp., Korea). Both products contain 4 mg of nilvadipine. One tablet of the test or the reference product was administered to the volunteers, respectively, by randomized two period cross-over study (2$\times$2 Latin square method). The determination of nilvadipine was accomplished using a validated capillary column GC with electron-capture detection. As a result of the assay validation, the quantiflcation of nilvadipine in human plasma by this technique was possible down to 0.5 ng/ml using 1 ml of plasma. Absolute overall recovery from five replicate analyses of nilvadipine-spiked sample were 88.4$\pm$ 10.24% (mean$\pm$ 5.D.) for human plasma of 10 ng/ml. The coefficients of variation (C.V.) were less than 20% and the actual concentration of nilvadipine measured by GC ranged from 80 to 99% in all plasma. Average drug concentrations at each sampling time and pharmacokinetic parameters calculated were not significantly different between two products (p>0.05); the area under the curve from time zero to 8 hr (AUCo-$_{8 hr}$) (22.8$\pm$5.90 vs 22.2$\pm$6.10 ng . hr/ml), maximum plasma concentration ( $C_{max}$) (10.0$\pm$2.85 vs 9.3$\pm$3.28 ng/ml) and time to reach maximum plasma concentration ( $T_{max}$) (1.2$\pm$0.31 vs 1.3 $\pm$0.47 hr). The differences of mean AU $Co_{8hr}$ $C_{max}$, and $T_{max}$ between the two products (2.25, 7.65, and 10.30%, respectively) were less than 20%. The power (1-$\beta$) and treaeent difference (7) for AU $Co_{8hr}$, and $C_{max}$ were more than 0.8 and less than 0.2, respectively. Although the power for Tmax was under 0.8, Tm\ulcorner of the two products was not significantly different from each other (p>0. 05). These results suggest that the bioavailability of Overeat tablet is not significantly different from that of Nivadil tablet. Therefore, two products are bioequivalent based on the current results.sults.lts.lts.lts.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.4
• /
• pp.353-362
• /
• 2016

An accurate hysteresis model of an elastomer is important for quantifying viscoelastic energy loss. We suggest a highly nonlinear hyper-viscoelastic constitutive model of elastomers. The model captures a nonlinear viscoelastic characteristic by combining Yeoh's hyperelastic model and Hoofatt's hysteresis model used Neo-Hookean hyperelastic model. Analytical and numerical models were generated from uniaxial cyclic tests of an elastomer under a sinusoidal load with a mean strain of 150%, amplitudes of 20~80%, and frequencies of 0.02~0.2Hz. The viscoelastic model can highly capture the viscoelastic energy loss up to a strain of 230%.

• Journal of Energy Engineering
• /
• v.20 no.2
• /
• pp.123-142
• /
• 2011

Coal Gasification Technology is one of the best alternatives among clean fossil fuel utilization. Major technology holding companies are devoting their efforts to develop more advanced technology to dominate the market in advance because of its importance on the applications such as IGCC, CTL, coal to SNG, various chemicals and so on. Japan and China, as well as America and European countries, have developed couple of thousands ton/day-class coal gasification technology. However, our gasification technology remains in the development stage with couple of ton/day-class pilot plant. So, we should be interested in developing this technology considering that we are heavily dependent of coal energy. In this paper, we summarized the trend and status of coal gasification technology development and commercial deployment of major technology holding companies mainly from the presentation materials of 'Gasification Technology Conference 2010', which is the biggest place of information exchange for recent coal gasification technology.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.846-853
• /
• 2017

Cold bed and $30kW_{th}$ pilot bed tests using circulating fluidized bed (CFB) were conducted to apply oxy-fuel technology for waste sludge combustion as a carbon capture and storage technology. In cold bed test, the minimum fluidization velocity ($u_{mf}$) and superficial velocity for fast fluidization was determined as 0.120 m/s and 2.5 m/s, respectively. In the pilot test, air and oxy-fuel combustion experiments for waste sludge were conducted using CFB unit. The flue-gas temperature in 21~25% oxy-fuel combustion was higher than that of air and up to 30% oxy-fuel combustion. In addition, the concentration of carbon dioxide was more than 80% with the oxygen injection range from 21% to 25% in oxy-fuel CFB waste sludge combustion.