• Korean journal of applied entomology
• /
• v.12 no.4 s.17
• /
• pp.139-142
• /
• 1973

Experiment was conducted to study resistance of rice varieties and lines originated from Korea and IRRI-sources to the white-backed planthopper, Sogatella furcifera Horvath. The nature of varietal resistance to the insects was evaluated from the viewpoints of nymphal period and adult emergence. The varieties Colombia, Muthumanikam and Pankhari-203 were resistant, the varieties CO-22, Mudgo and Vellailangalayan moderately susceptible, the other varieties all susceptible. Nymphal period and rate of adult emergence were significantly different according to the degree of resistance of the rice varieties. Nymphal period was short (about 10 days) in the susceptible varieties and long (about 14-16 days) in the resistant varieties. The .ate of adult emergence was significantly lower in the resistant varieties than in the susceptible varieties. The lower rate of adult emergence in the resistant varieties may be due to the fact that the insects were suffered higher nymphal mortality in the resistant than in the susceptible varieties.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.288-296
• /
• 2007

Distraction osteogenesis(DO) is a technique of lengthning bone including soft tissue by gradual separation of surgically divided bone surfaces. Distraction osteogenesis combination with a compression stimulation(DO-CO) was a new technique by authors to enhance new bone quality and to shorten the consolidation period. The purpose of this study was to compare DO with DO combined with compression force in efficiency by evaluating the expression of TGF-${\beta}1$, osteonectin and BMP-4 on bone regenerate in rabbit mandible. Fourty two rabbits were used for this experiment. On the control group, the distraction was carried out at the rate of 1 mm per day to obtain the amount of 8 mm distraction for 8 days. On the experimental group, the distraction was carried out at the rate of 1 mm per day for 10 days, 3 days-latency period, and then the compression was carried out as counter direction 1 mm per day for 2 days. After 0 day, 5 days, 13 days, 20 days, 27 days, 34 days and 41 days, three rabbits on each group were sacrificed and the distracted portion of mandible were cut and treated for RT-PCR observation. The level of expression of TGF-${\beta}1$ and osteonectin were shown more and longer expression in the experimental group than in the control group. The expression of BMP-4 was maintained with high level during the entire experimental period in both groups. These findings suggested that DO with compression stimulation could be a favorable technique for obtaining a good new bone quality.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.282-287
• /
• 2016

Recently in order to protect the ocean environment and to reduce energy consumption, shipbuilders have been developing highly economized ships. This research analyzed the possibility of adopting the onshore absorption refrigerator to offshore ships having a cooling system with refrigerant by using the waiste heat of the engine jacket cooling water instead of compression refrigerators. The results showed that R236fa could be a suitable medium for absorbing the heat of the absorber and condenser in an absorption refrigerator. The cooling system using R236fa achieved a high COP of 0.798, which is 15% and 5% higher than an air cooling system with a cooling tower and a water cooling system with a heat exchanger, respectively. The cooling system with R236fa achieved high efficiency with a 25% reduction in flow rate of LiBr solution and only 15.7% flow rate of cooling medium as compared to the water cooling system. The heating of sea water by the engine jacket water flowing out from the generator can prevent the crystallization of LiBr solution due to the low temperature of sea water.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.239-239
• /
• 2017

The enhancement of leaf photosynthetic capacity can have the potential to improve the seed yield of soybean. Key targets for the increase of leaf photosynthetic capacity remains unclear in soybean. Peking, Chinese local variety, has been the useful material for soybean breeding since it shows various resistances against biotic and abiotic stress. Sakoda et al., 2017 reported that Peking had the higher capacity of leaf photosynthesis than Enrei, Japanese elite cultivar. They identified the genetic factors related to high photosynthetic capacity of Peking. The objective of this study is to elucidate the physiological basis underlying high photosynthetic capacity of Peking. Peking and Enrei were cultivated at the experimental field of the Graduate School of Agriculture, Kyoto University, Kyoto, Japan. The sowing date was July 4, 2016. Gas exchange parameters were evaluated at the uppermost fully expanded leaves on 43, 49, and 59 days after planting (DAP) with a portable gas exchange system, LI-6400. The leaf hydraulic conductance, $K_{leaf}$, was determined based on the water potential and transpiration rate of the uppermost fully expanded leaves on 60 DAP. The morphological traits related to leaf photosynthesis were analyzed at the same leaves with the gas exchange measurements. The light-saturated $CO_2$ assimilation rate ($A_{sat}$) of Peking was significantly higher than that of Enrei at 43 and 59 DAP while the stomatal conductance ($g_s$) of Peking was significantly higher at all the measurements (p < 0.05). It suggested that high $A_{sat}$ was mainly attributed to high $g_s$ in Peking. $g_s$ is reported to be affected by the morphological traits and water status inside the leaf, represented by $K_{leaf}$, in crop plants. The tendency of the variation of the stomatal density between two cultivars was not consistent throughout the measurements. On the other hand, $K_{leaf}$ of Peking was 59.0% higher than that of Enrei on 60 DAP. These results imply that high $g_s$ might be attributed to high $K_{leaf}$ in Peking. Further research is needed to reveal the mechanism to archive high $g_s$ on the basis of water physiology in Peking. The knowledge combining the genetic and physiological basis underlying high photosynthetic capacity of Peking can be useful to improve the biomass productivity of soybean.

• Journal of Mechanical Science and Technology
• /
• v.18 no.5
• /
• pp.770-779
• /
• 2004

This paper describes the micro cutting of wear resistant tungsten carbides using PCD (Poly-Crystalline Diamond) cutting tools in performance with SEM (Scanning Electron Microscope) direct observation method. Turning experiments were also carried out on this alloy (V50) using a PCD cutting tool. One of the purposes of this study is to describe clearly the cutting mechanism of tungsten carbides and the behavior of WC particles in the deformation zone in orthogonal micro cutting. Other purposes are to achieve a systematic understanding of machining characteristics and the effects of machining parameters on cutting force, machined surface and tool wear rates by the outer turning of this alloy carried out using the PCD cutting tool during these various cutting conditions. A summary of the results are as follows: (1) From the SEM direct observation in cutting the tungsten carbide, WC particles are broken and come into contact with the tool edge directly. This causes tool wear in which portions scrape the tool in a strong manner. (2) There are two chip formation types. One is where the shear angle is comparatively small and the crack of the shear plane becomes wide. The other is a type where the shear angle is above 45 degrees and the crack of the shear plane does not widen. These differences are caused by the stress condition which gives rise to the friction at the shear plane. (3) The thrust cutting forces tend to increase more rapidly than the principal forces, as the depth of cut and the cutting speed are increased preferably in the orthogonal micro cutting. (4) The tool wear on the flank face was larger than that on the rake face in the orthogonal micro cutting. (5) Three components of cutting force in the conventional turning experiments were different in balance from ordinary cutting such as the cutting of steel or cast iron. Those expressed a large value of thrust force, principal force, and feed force. (6) From the viewpoint of high efficient cutting found within this research, a proper cutting speed was 15 m/min and a proper feed rate was 0.1 mm/rev. In this case, it was found that the tool life of a PCD tool was limited to a distance of approximately 230 m. (7) When the depth of cut was 0.1 mm, there was no influence of the feed rate on the feed force. The feed force tended to decrease, as the cutting distance was long, because the tool was worn and the tool edge retreated. (8) The main tool wear of a PCD tool in this research was due to the flank wear within the maximum value of $V_{max}$ being about 260 $\mu\textrm{m}$.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.2
• /
• pp.113-127
• /
• 2007

In this study, a model to calculate the expected total construction cost is developed that simultaneously considers the rehabilitation cost related to the sliding of the caisson, the economic damage cost due to harbor shutdown in the event of excessive caisson sliding, and the economic damage cost due to temporal operational stoppage by excessive wave overtopping. A discount rate is used to convert the damage costs occurred at different times to the present value. The optimal cross-section of a caisson is defined as the cross-section that requires a minimum expected total construction cost within the allowable limit for the expected sliding distance of the caisson during the lifetime of the breakwater. Two values are used for the allowable limit: 0.3 and 0.1 m. It was found that the economic damage cost due to harbor shutdown by excessive caisson sliding is more critical than the rehabilitation cost of the caisson or the economic damage cost by excessive wave overtopping in the decision of the optimal cross-section. In addition, the optimal cross-section of the caisson was shown to be determined by the allowable limit for the expected sliding distance rather than the minimum expected total construction cost as a larger value is used for the threshold sliding distance of the caisson for harbor shutdown.

• Applied Biological Chemistry
• /
• v.38 no.2
• /
• pp.123-128
• /
• 1995

Several factors affecting on transformation efficiency were studied to establish a Agrobacterium rhizogenes mediated system for the transformation of Populus species, and We could obtaine tansgenic plantlets expressing the introduced gene. Leaf sections were more sensitive than stem sections to kanamycin and thought to be better material for transformant screening. The bacterial density did not affect on the efficiency of transformation over the range of $4{\times}10^5{\sim}7{\times}10^9\;cfu$. The optimum period for co-cultivation was one day or shorter. Both of the optimum concentrations of cefotaxime and ampicillin in the medium were $250\;{\mu}g/ml$ for elimination of bacteria from the inoculated leaf sections. The addition of acetosyringone in the bacterial culture medium increased transformation rate, and the highest rate was obtained at $50\;{\mu}M$ of acetosyringone. The transformed galls could be selectively induced and gown on the growth regulator-free medium or on the medium containing $100\;{\mu}g/ml$ or higher contrition of kanamycin. The roots were induced from the galls incited by A. rhizogenes within 3 weeks on the growth regulator-free medium as well as on the medium containing growth regulators. The plantlets were regenerated from the galls cultured for 6 weeks on the medium containing 0.05 mg/ml of NAA and 0.5 mg/ml of BA. The expressions of the introduced opine gene in the transformed galls and plantlets were confirmed by the analysis of agropine and mannopine.

• Journal of Information Management
• /
• v.42 no.4
• /
• pp.137-154
• /
• 2011

A headword finding system is defined as an information retrieval system using a word gloss as a query. We use the gloss as a document in order to implement such a system. Generally the gloss is very short in length and then makes very difficult to find the most proper headword for a given query. To alleviate this problem, we expand the document using the concept of query expansion in information retrieval. In this paper, we use 2 document expansion methods : gloss expansion and similar word expansion. The former is the process of inserting glosses of words, which include in the document, into a seed document. The latter is also the process of inserting similar words into a seed document. We use a featureless clustering algorithm for getting the similar words. The performance (r-inclusion rate) amounts to almost 100% when the queries are word glosses and r is 16, and to 66.9% when the queries are written in person by users. Through several experiments, we have observed that the document expansions are very useful for the headword finding system. In the future, new measures including the r-inclusion rate of our proposed measure are required for performance evaluation of headword finding systems and new evaluation sets are also needed for objective assessment.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.915-922
• /
• 2017

This study aimed in onion production by evaluating cost and labor efficiencies of onion storage methods using either a ton-bag or a wire-steel pallet. New methods using ton-bag and wire-steel pallets were developed and applied to postharvest tasks, such as harvest packaging, transportation, and storage. The storage parameters evaluated for their effect on the logistics of onion production were: working duration, working hours, and cost expenditure. The longitudinal tensile strength of the ton-bag developed in this study was 16% higher than that of the conventional ton-bag. The wire-steel pallet developed in this study had 10% more storage capacity in a low-temperature storage room, and its truck loading capacity was more than doubled compared to that of the conventional steel pallet. There was no difference in the wasting rate during bulk storage between the newly developed wire-steel pallet and the conventional steel pallet, for 500 kg of onions. However, the bulk storage of 1,000 kg of onions using the wire-steel pallet was not found to be suitable, because the wasting rate of onions stored using the wire-pallet was 3.7% higher than that of onions stored using a conventional steel pallet. The time and the total investing costs for the bulk method decreased by 50.1% and 46.1%, respectively, compared to those for conventional harvest. In the bulk storage using the wire-steel pallet, the total storage cost decreased by 28.8%. Thus, it is estimated that we could have saved 18.3 billion won if the wire-steel pallet method about 30% of the total onion production (1,298,749 M/T) in 2016.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.201-205
• /
• 2007

Biodegradable polymers such as polylactide, polyglycolide and poly (lactide- co-glycolide) (PLGA) have been extensively investigated because of easily controlled drug release rate, completely degradable materials without the toxic by-product, and good biocompatibility. But, according to the bulk erosion property of PLGA in vitro test, it had the disadvantage that first-order release reduced releasing amount slowly after excessive initial burst. In this study we used PLGA powder obtained through recrystallization to revise bulk erosion property of PLGA. The PLGA used in this study was prepared by vacuum drying method and to estimate release profiles of BCNU loaded PLGA wafer. We also evaluated the release profile of drug with the water soluble additive. It was found that the drug loaded PLGA recrystallized by vacuum drying method exhibited the initial burst and the constant rate of drug release compared to that prepared by a conventional method.