• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2427-2444
• /
• 2021

The lack of plant-side energy storage analysis to support nuclear power plants (NPP), has setup this research endeavor to understand the characteristics and role of specific storage technologies and the integration to an NPP. The paper provides a qualitative review of a wide range of configurations for integrating the energy storage system (ESS) to an operating NPP with pressurized water reactor (PWR). The role of ESS technologies most suitable for large-scale storage are evaluated, including thermal energy storage, compressed gas energy storage, and liquid air energy storage. The methods of integration to the NPP steam cycle are introduced and categorized as electrical, mechanical, and thermal, with a review on developments in the integration of ESS with an operating PWR. By adopting simplified off-design modeling for the steam turbines and heat exchangers, the results show the performance of the PWR steam cycle changes with respect to steam bypass rate for thermal and mechanical storage integration options. Analysis of the integrated system characteristics of proposed concepts for three different ESS suggests that certain storage technologies could support steady operation of an NPP. After having reviewed what have been accomplished through the years, the research team presents a list of possible future works.

• Structural Engineering and Mechanics
• /
• v.69 no.4
• /
• pp.407-416
• /
• 2019

This paper develops a wireless sensor for online fatigue crack detection and failure warning based on crack-induced nonlinear ultrasonic modulation. The wireless sensor consists of packaged piezoelectric (PZT) module, an excitation/sensing module, a data acquisition/processing module, a wireless communication module, and a power supply module. The packaged PZT and the excitation/sensing module generate ultrasonic waves on a structure and capture the response. Based on nonlinear ultrasonic modulation created by a crack, the data acquisition/processing module periodically performs fatigue crack diagnosis and provides failure warning if a component failure is imminent. The outcomes are transmitted to a base through the wireless communication module where two-levels duty cycling media access control (MAC) is implemented. The uniqueness of the paper lies in that 1) the proposed wireless sensor is developed specifically for online fatigue crack detection and failure warning, 2) failure warning as well as crack diagnosis are provided based on crack-induced nonlinear ultrasonic modulation, 3) event-driven operation of the sensor, considering rare extreme events such as earthquakes, is made possible with a power minimization strategy, and 4) the applicability of the wireless sensor to steel welded members is examined through field and laboratory tests. A fatigue crack on a steel welded specimen was successfully detected when the overall width of the crack was around $30{\mu}m$, and a failure warnings were provided when about 97.6% of the remaining useful fatigue lives were reached. Four wireless sensors were deployed on Yeongjong Grand Bridge in Souht Korea. The wireless sensor consumed 282.95 J for 3 weeks, and the processed results on the sensor were transmitted up to 20 m with over 90% success rate.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.5-10
• /
• 2018

In this study, the effect of physico-chemical factors (e.g., pressure, electrolyte, and organic matter) in the gas hydrate deposit on CH4-CO2 replacement process was investigated experimentally. The higher initial pressure during gas injection led the higher reaction rate at the first time, but finally it did not. Electrolytes and organic matter have some effects on reforming process after dissociation of gas hydrate. It is expected that further research using real marine sediments with actual gas hydrate will enable the development of technologies applicable to the characteristics of domestic seabed geology. Ultimately, it is expected that it will be possible to recover and utilize methane as an organic resource through application of domestic gas hydrate deposit in the Ulleung Basin, East Sea.

• Resources Recycling
• /
• v.28 no.3
• /
• pp.59-67
• /
• 2019

This study was conducted to fabrication pig iron containing copper and to reduce sulfur content pig iron. Roasting test was conducted for 1 ~ 9 hours at each temperature of $500^{\circ}C$, $700^{\circ}C$, and $900^{\circ}C$. In addition, the effect of oxygen partial pressure with 0.5, 0.8, and 1 atm was carried out for 30 minutes at $900^{\circ}C$. It was found that there is no effect to reduce sulfure in pig iron through roasting and oxygen partial pressures. The addition of CaO with 15 wt.% was found to reduce sulfur content up to 0.001 wt.%. The suitable temperature and reactive time for carbothermic reduction were $1600^{\circ}C$ and 30 minutes which shows the highest recovery rate of iron from the copper slag.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.50-56
• /
• 2019

This study aims to make artificial stone by recycling blast furnace slag powder, red mud and recycled aggregate, which are known as industrial waste. Recycled aggregate is a typical construction waste, and various recycled products such as concrete block are being sold. In this study, we tried to make artificial stone mixed with waste such as recycled aggregate, and experimented with the use of artificial stone and further study. As the red mud replacement ratio increased, the absorption ratio, fluidity and air content of the matrix were measured to be decreased, and the strength and density were found to increase. The fluidity and absorption ratio decreased with increasing the replacement ratio of recycled aggregate, and the air quantity, rate of aggregate on the surface, density and intensity increased to a certain level. Therefore, this study intends to make artificial stone using recycled resources and conducted basic experiments for further study.

• Animal Bioscience
• /
• v.34 no.9
• /
• pp.1451-1459
• /
• 2021

Objective: The objectives of the study were to evaluate reproductive performance and selection response through genetic trend of community-based breeding programs (CBBPs) of Bonga sheep. Methods: Reproduction traits data were collected between 2012 and 2018 from Bonga sheep CBBPs. Phenotypic performance was analyzed using the general linear model procedures of Statistical Analysis System. Genetic parameters were estimated by univariate animal model for age at first lambing (AFL) and repeatability models for lambing interval (LI), litter size (LS), and annual reproductive rate (ARR) traits using restricted maximum likelihood method of WOMBAT. For correlations bivariate animal model was used. Best model was chosen based on likelihood ratio test. The genetic trends were estimated by the weighted regression of the average breeding value of the animals on the year of birth/lambing. Results: The overall least squares mean±standard error of AFL, LI, LS, and ARR were 375±12.5, 284±9.9, 1.45±0.010, and 2.31±0.050, respectively. Direct heritability estimates for AFL, LI, LS, and ARR were 0.07±0.190, 0.06±0.120, 0.18±0.070, and 0.25±0.203, respectively. The low heritability for both AFL and LI showed that these traits respond little to selection programs but rather highly depend on animal management options. The annual genetic gains were -0.0281 days, -0.016 days, -0.0002 lambs and 0.0003 lambs for AFL, LI, LS, and ARR, respectively. Conclusion: Implications of the result to future improvement programs were improving management of animals, conservation of prolific flocks and out scaling the CBBP to get better results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.956-962
• /
• 2022

Diffuse thyroid disease has ambiguous diagnostic criteria and many errors occur according to the subjective diagnosis of skilled practitioners. If image processing technology is applied to ultrasound images, quantitative data is extracted, and applied to a computer auxiliary diagnostic system, more accurate and political diagnosis is possible. In this paper, 19 parameters were extracted by applying the Gray level co-occurrence matrix (GLCM) algorithm to ultrasound images classified as normal, mild, and moderate in patients with thyroid disease. Using these parameters, an artificial neural network (ANN) was applied to analyze diffuse thyroid ultrasound images. The final classification rate using ANN was 96.9%. Using the results of the study, it is expected that errors caused by visual reading in the diagnosis of thyroid diseases can be reduced and used as a secondary means of diagnosing diffuse thyroid diseases.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.110-110
• /
• 2003

The high incidence of polyspermic fertilization is one of the major causes lowering the overall efficiency of porcine IVF. The common procedure for IVF involves the co-culture of both gametes in the medium drop, which increases sperm concentration and incidence of polyspermy. Therefore, the present study was carried out to increase the efficiency of porcine IVF by reducing polyspermy using a modified swim-up method. This method modifies conventional swim-up washing by placing oocytes directly at the time of washing. Sperm pellet was prepared in the tube and mature oocytes were placed on cell strainer with $70 \mu m$ pore size (Falcon 2350) at the top of the tube. After insemination, the oocytes were stained for examination. Also, the developmental potential of fertilized embryos was measured to evaluate for the feasibility of this method. While having similar penetration rates in both methods ($86.67 \pm 2.36% to 83.33 \pm 1.36%$), there was a significant reduction of polyspermy in modified swim-up method ($17.50 \pm 1.60%$) compare to the control ($44.1 \pm 3.70%$ (p<0.05). Subsequent culture showed higher rate of blastocyst formation in modified swim-up method (20.44$\pm$0.99%) than the control ($15.73 \pm 3.26%$) (P<0.05), even though there was no significant difference. These results suggest that, by controlling the number of spermatozoa reaching the oocytes, porcine oocytes might be protected from polyspermy in vitro. Also, the developmental potential of the fertilized embryos using this method could be improved by increasing the pool of spermatozoa with better quality. Further optimization of the procedure required to implicate this method in routine porcine IVF.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.6
• /
• pp.5-11
• /
• 2023

The engineering industry heavily relies on fossil fuels such as coal and petroleum to generate energy through combustion. However, this process emits carbon dioxide into the atmosphere, leading to global warming. To mitigate this issue, researchers have explored various methods to reduce carbon dioxide emissions, one of which is carbon dioxide underground storage technology. This innovative technology involves capturing carbon dioxide from industrial plants and injecting it into the saturated ground layer beneath the earth's surface, storing it securely underground. Despite its potential benefits, carbon dioxide underground storage efficiency needs improvement to optimize storage in a limited space. To address this challenge, our research team has focused on improving storage efficiency by utilizing surfactants. Furthermore, we evaluated how different carbon dioxide states, including gaseous, liquid, and supercritical, impact storage efficiency based on their respective pressures and temperatures within the underground reservoir. Our findings indicate that using surfactants and optimizing the injection rate can effectively enhance storage efficiency across all carbon dioxide states. This research will pave the way for more efficient carbon dioxide underground storage, contributing to mitigating the environmental impact of fossil fuels on the planet.

• Journal of Animal Reproduction and Biotechnology
• /
• v.38 no.4
• /
• pp.225-235
• /
• 2023

Background: Largemouth bass (Micropterus salmoides) is introduced species that has caused aquatic ecology activity both in vitro and in vivo were investigated for the possibility of application of the bass extract as an alternative feed ingredient. Methods: The bass oil was extracted using a 1-L supercritical extractor, while the protein was extracted from 250 g of bass dry matter, which was dissolved in 1 mL of H₂O at 50℃. Both oil and protein extracts were evaluated antioxidant activities and the level of DPPH radical scavenging assay and nitric oxide (NO) production assay with lipopolysaccharide response. Oral administration of 6.6 µL/g bass protein and 5.38 µL/g bass oil conducted for investigating serological and physiological effect. Results: DPPH radical scavenging showed similar radical scavenging ability of 50 µM of ascorbic acid at 200 ㎍ of protein and 10% of oil treatment. NO concentration was diminished by the treatment of bass oil. Oral administration of both bass oil and proteins to mice showed that the body weight increase rate of the bass oil treated group was significantly reduced by 1.55 g compared to the other groups. The number of white blood cells (WBC) was increased by 4.52 k/µL in the bass protein-treated group and 4.44 k/µL in the bass oil-treated group compared to the control group. However, the serum IgG level did not show a significant difference between the bass extract-treated groups and the control group. Conclusions: These studies demonstrate that both bass oil and proteins extracted from the bass not only provide excellent effects of antioxidant and immune activity but can also be used as functional food supplements.