• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.194-195
• /
• 2009

According to the issue "global warming", many regulations and agreements with countries in the world are becoming set and it is being fulfill now. Under the progress of Post Kyoto Protocol agreement, It will be sure that Korea rave a duty to reduce $CO_2$ emission from 2013. For them, Korea have to make a strategies about the Climatic Change Convention for all industries. Recently, a great attention about $CO_2$ emission in the world is focused on port, shipping line and airline. Most countries are establishing policies to prevent environment from these industry fields, but Korea has not yet made for them. Thus, Korea need to collect $CO_2$ emission data not only the routes of container from port but also activities in the port. In this paper, an estimation of $CO_2$ emission under the route of container transportation at Korea by using O/D analysis will be addressed. And then, it will be used to make a optimal routes of container transportation which can reduce $CO_2$ emission in future.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.6
• /
• pp.356-370
• /
• 2017

The energy savings and $CO_2$ emission reductions obtainable from the situation that the Smart Grid system (SGs) is assumed to be applied in Korea up to 2030 is quantitatively analyzed with many reported data. For calculation, SGs is divided into five sectors such as Smart Transmission and Distribution (ST&D), Smart Consumer (SC), Smart Electricity Service (SES), Smart Renewable Energy (SRE) and Smart Transportation (ST). Total annual energy savings in 2030 is estimated to be approximately 103,121 GWh and this is 13.1% of total electricity consumption outlook. Based on this value, total amount of reducible $CO_2$ emissions is calculated to 55.38 million $tCO_2$, which is 17.6% of total nation's GHG reduction target. Although the contribution of energy saving due to SGs to total electricity consumption increases as years go by, that of $CO_2$ emission reduction gradually decreases. This might be because that coal fired based power generation is planned to be sharply increased and the rate of $CO_2$ emission reduction scheduled by nation is very fast. The contributable portion of five each sector to total $CO_2$ emission reductions in 2030 is estimated to be 44.37% for SC, 29.16% for SRE, 20.12% for SES, 5.11% for ST&D, and 1.24% for ST.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.77-83
• /
• 2023

Energy consumption is increased by rapid industrialization. As a result, climate change is accelerating due to the increase in CO₂ concentration in the atmosphere. Therefore, a shift in the energy paradigm is required. Hydrogen is in the spotlight as a part of that. Currently 95% of hydrogen is fossil fuel-based reforming hydrogen which is accompanied by CO₂ emissions. This is called gray hydrogen, if the CO₂ is captured and emission of CO₂ is reduced, it can be converted into blue hydrogen. There are 3 technologies to capture CO₂: absorption, adsorption and membrane technology. In order to select CO₂ capture technology, the analysis of the exhaust gas should be carried out. The concentration of CO₂ in the flue gas from the hydrogen production process is higher than 20%if water is removed as well as the emission scale is classified as small and medium. So, the application of the membrane technology is more advantageous than the absorption. In addition, if LNG cold energy can be used for low temperature CO₂ capture system, the CO₂/N₂ selectivity of the membrane is higher than room temperature CO₂ capture and enabling an efficient CO₂ capture process. In this study, we will analyze the flue gas from hydrogen production process and discuss suitable CO₂ capture technology for it.

• Journal of Climate Change Research
• /
• v.1 no.3
• /
• pp.189-203
• /
• 2010

The objective of this study is the estimate of $CO_2$ emissions by the energy consumption of functional technology introduced by classifying energy use in households according to functions as well as energy resources. This study also intends to provide the practical basis data in order to establish specific alternatives for GHG mitigation in residential sector with examining the cause analysis affecting $CO_2$ emission increases from 1995 to 2007. The results of this study show a 6.6% increase in the total $CO_2$ from 60,636 thousand tons in 1995 to 64,611 thousand tons in 2007 by using energy in residential sector. Heating is the greatest $CO_2$ emission sector by use, followed electric appliances, cooking, lighting and cooling. Heating sector shows 56.6% reductions from 71.5% in 1995 and as do cooling and electric home appliances, with a 2.4% increase from 0.6% and a 21.8% increase from 14.2% respectively. To analyze factors resulted in $CO_2$ emissions in residential sector, the relevant indicator change rate from 2005 to 2007 was examined. The results find that population, the number of household, housing areas, family patterns, and family income resulted in the $CO_2$ emissions increase in residential sector from 1995 to 2007. On the other hand, carbon intensity and energy intensity contribute to $CO_2$ reduction in residential sector with -2% and -38.7% respectively because of the energy conversion and the improvement of energy efficiency in electronic appliances. This study can be used as a reference when taken account of the reality and considered the introduction of highly effective measures to increase the possibility of mitigation potential in residential sector hereafter.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.597-604
• /
• 2012

The present study assessed the $CO_2$ emissions of concrete according to the type and replacement ratio of supplementary cementitious materials (SCM) and concrete compressive strength using a comprehensive database including 2464 cement concrete specimens and 776 cement concrete mixes with different SCMs. The system studied in $CO_2$ assessment of concrete based on Korean lifecycle inventory was from cradle to pre-construction, which includes consistent materials, transportation and production phases. As the performance efficiency indicators, binder and $CO_2$ intensities were analyzed, and simple equations to evaluate the amount of $CO_2$ emission of concrete were then formulated as a function of concrete compressive strength and the replacement ratio of each SCM. Hence, the proposed equations are expected to be practical and useful as a guideline to determine the type and replacement ratio of SCM and unit content of binder in concrete mix design that can satisfy the target compressive strength and $CO_2$ reduction percentage relative to cement concrete.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.704-711
• /
• 2005

In this study, life cycle assessment(LCA) for the nuclear power generation system and the thermal power generation system, which make a great distribution of the electric power supply in Korea, has been carried out to compare the environmental impact between two power generation systems. In system boundary of this study, the stage of construction, operation and demolition & disposal were included. For life cycle impact assessment(LCIA), three cases were considered; the single environmental impact for the $CO_2$ emissions, the 8 major global environmental impact, and the major global environmental impact categories including radioactive impact. As the results, it was found that the nuclear power generation system is environmentally superior to the thermal power generation system as 10,000 times in the evaluation for the $CO_2$ emissions, 90 times in the evaluation for the 8 major environmental impact categories, and 40 times in the evaluation for the environmental impact categories including radioactive impact.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.642-645
• /
• 2007

석탄, 폐기물 등 다양한 시료의 가스화 반응을 통해서 발생되는 합성가스는 CO, $H_2$, $CO_2$가 주성분으로 가스엔진, 가스터빈 등의 연료로 사용하여 발전하거나 합성반응을 통해 다양한 화학원료로의 전환이 가능하다. 합성가스를 가스엔진, 가스터빈, 연료전지등의 연료로 사용하는 경우는 고효율 발전이 가능하여 기존 연소방식의 발전과 비교하여 단위 전력 생산량 당 $CO_2$의 배출량이 감소 되며, 여기에 $CO_2$ 분리공정을 적용하면 $CO_2$ 배출량 감소효과를 극대화 할 수 있다. 화석연료의 연소 및 가스화 반응을 통해서 발생하는 이산화탄소의 분리에 대한 많은 연구가 진행되고 있으나, 본 연구에서는 흡착방식을 이용한 합성가스 내의 이산화탄소 분리를 위하여 흡착제를 이용한 이산화탄소의 흡착, 탈착 성능 분석 연구를 수행하였다. 합성가스내의 이산화탄소를 분리하기 위한 흡착제로는 NaX 계열의 zeolite를 이용하였으며, 가스화 반응을 통해 발생한 합성가스를 흡착제에 통과시켜 이산화탄소의 선택적 흡착 여부를 확인하였다. 또한 TPD(Temperature Programmed Desorption)방법을 이용하여 흡착제의 이산화탄소 흡착 성능을 분석하였다.

• Annual Conference of KIPS
• /
• 2011.11a
• /
• pp.654-657
• /
• 2011

Gartner에 따르면 현재 IT산업에서 배출하는 Co2의양은 전 세계 배출량의 2%에 해당하고, 국내 IT기기의 탄소 배출량은 1,750만톤, 2012년에는 2,110만 톤으로 증가할 것으로 예상하고 있다. 이 중 전 세계 기업의 전산설지 전력 소비량은 1척억kWh가 소모되고 있으며, 서버의 전력소모량은 매년 20%씩 증가할 것으로 보고 있다. 또한 IT 시설물은 이산화탄소가 배출되는 7%의 가장 높은 비율을 차지하고 있다. 이에 따라 에너지 경비 절감 및 효율성을 높이고 탄소 배출량 감소를 위한 기술 및 솔루션 개발을 위한 그린 IT기술의 필요성이 높아지고 있다. 이러한 IT 시설물의 에너지 사용량을 실시간으로 확인, 온 습도 센서를 통한 자료 분석을 통하여 대상시설에 맞는 탄소배출량을 환산하여, 이를 활용한 에너지 시설의 제어를 통해 탄소배출과 경비를 절감시키는 시스템이 스마트탄소 통합관제시스템이다. 그리하여 본 논문에서는 통신 프로토콜 단에서부터 '관제'시스템의 성격에 맞고, 저장소의 공간을 효율적이고, 탄소 배출량을 감축시키는데 일조하는 스마트탄소 통합관제시스템의 프로토콜을 설계하고, 이를 테스트 하였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1185-1194
• /
• 2011

This study was carried out to estimate carbon emission using LCA (Life Cycle Assessment) and to establish LCI (Life Cycle inventory) DB for lettuce production system in protected cultivation. The results of data collection for establishing LCI DB showed that the amount of fertilizer input for 1 kg lettuce production was the highest. The amounts of organic and chemical fertilizer input for 1 kg lettuce production were 7.85E-01 kg and 4.42E-02 kg, respectively. Both inputs of fertilizer and energy accounted for the largest share. The amount of field emission for $CO_2$, $CH_4$ and $N_2O$ for 1 kg lettuce production was 3.23E-02 kg. The result of LCI analysis focused on GHG (Greenhouse gas) showed that the emission value to produce 1 kg of lettuce was 8.65E-01 kg $CO_2$. The emission values of $CH_4$ and $N_2O$ to produce 1 kg of lettuce were 8.59E-03 kg $CH_4$ and 2.90E-04 kg $N_2O$, respectively. Fertilizer production process contributed most to GHG emission. Whereas, the amount of emitted nitrous oxide was the most during lettuce cropping stage due to nitrogen fertilization. When GHG was calculated in $CO_2$-equivalents, the carbon footprint from GHG was 1.14E-+00 kg $CO_2$-eq. $kg^{-1}$. Here, $CO_2$ accounted for 76% of the total GHG emissions from lettuce production system. Methane and nitrous oxide held 16%, 8% of it, respectively. The results of LCIA (Life Cycle Impact assessment) showed that GWP (Global Warming Potential) and POCP (Photochemical Ozon Creation Potential) were 1.14E+00 kg $CO_2$-eq. $kg^{-1}$ and 9.45E-05 kg $C_2H_4$-eq. $kg^{-1}$, respectively. Fertilizer production is the greatest contributor to the environmental impact, followed by energy production and agricultural material production.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.145-150
• /
• 2012

This study was conducted to measure methane ($CH_4$) and nitrous oxide ($N_2O$) emissions from the 6 month old litter stockpile used for korean native cattle (Hanwoo) from August 3, 2007 to October 4, 2007. Daily mean $CH_4$ emissions was peaked to 273.013 ${\mu}g\;m^{-2}\;s^{-1}$ (SE : ${\pm}1.047{\mu}g\;m^{-2}\;s^{-1}$) on first day and then gradually decreased to 2.309 ${\mu}g\;m^{-2}\;s^{-1}$ (SE : ${\pm}0.061{\mu}g\;m^{-2}\;s^{-1}$) at the end of this experiment. Daily mean $N_2O$ emissions was as little as 0.269 ${\mu}g\;m^{-2}\;s^{-1}$ (SE : ${\pm}0.018{\mu}g\;m^{-2}\;s^{-1}$) on first day, but exponentially increased up to 3.569 ${\mu}g\;m^{-2}\;s^{-1}$ (SE : ${\pm}0.454{\mu}g\;m^{-2}\;s^{-1}$) on 43rd day and then slowly decreased to 1.888 ${\mu}g\;m^{-2}\;s^{-1}$ (SE : ${\pm}0.012{\mu}g\;m^{-2}\;s^{-1}$) at the end of this experiment. Carbon dioxide equivalent ($CO_2$-eq), calculated by global warming potentials of $CH_4$ or $N_2O$, of $CH_4$ on first day occupied approximately 99% of sum of $CO_2$-eq of $CH_4$ and $N_2O$. Methane emissions decreased and $N_2O$ emissions increased so that $CO_2$-eq ratio of $CH_4$ to $N_2O$ was 50:50 on 34th day. The effect of $N_2O$ on the ratio was increase thereafter. The ratio of daily mean $CH_4$ and $N_2O$ emissions to daily error of the mean was calculated to find daily fluctuation of $CH_4$ and $N_2O$ emissions. The ratio of $CH_4$ was less than 1.0% till 11th day but increased to 10.9% on 57th day. The ratio of $N_2O$ (0.4%~51.0%) was higher than that of $CH_4$, showing high in early stage and then gradually decrease, which was different from the pattern of $CH_4$. The ratio of daily mean emissions to daily error of the mean was little in case of active $CH_4$ or $N_2O$ generation period, which would be caused by the temporal and spatial heterogeneity of composting process. Hence more air supply on early stage to decrease $CH_4$ generation and proper turning to reduce spatial heterogeneity are needed to mitigate greenhouse gas emissions.