• 천문학논총
• /
• 제32권1호
• /
• pp.147-149
• /
• 2017

Since the launch of the Herschel Space Observatory, our understanding about the photo-dissociation regions (PDR) has taken a step forward. In the bandwidth of the Fourier Transform Spectrometer (FTS) of the Spectral and Photometric Imaging REceiver (SPIRE) on board Herschel, ten CO rotational transitions, including J = 4 - 3 to J = 13 - 12, and three fine structure lines, including [$C{\small{I}}$] 609, [$C{\small{I}}$] 370, and [$N{\small{II}}$] $205{\mu}m$, are covered. I present our findings from the FTS observations at the nuclear region of M83, based on the spatially resolved physical parameters derived from the CO spectral line energy distribution (SLED) map and the comparisons with the dust properties and star-formation tracers. This article discusses (1) the potential of using [$N{\small{II}$] 205 and [$C{\small{I}}$] $370{\mu}m$ as star-formation tracers; (2) the excitation mechanisms of warm CO in the nuclear region of M83.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.988-990
• /
• 2003

A plastic substrate for flexible display is developed. The developed PES film has good resistance to heat, low intrinsic birefringence, and mechanical stability. The gas barrier property in the substrate is improved through depositing organic and inorganic multi layer on plastic film by PVD and CVD process.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.97-102
• /
• 2013

As the offshore oil and gas upstream industry moves into deeper water, the FPSOs are the cost-effective solution. In the harsh environment such as in North Sea, station keeping and heading control capability obtained through the DP and Position Mooring (DPM) system of FPSOs play important roles to keep the safety. This paper introduces the concept, function and sub-system of the DPM systems which has been applied for the North Sea FPSOs since the late 1980s. The requirements and guidelines of some internationally recognized standards are also described, which are important to build the design basis at the early phases of the project.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.888-894
• /
• 2016

In this paper, we describe a method for precisely measuring the abrasion of the railway using an image processing technique. To calculate the wear of the rails, we provided a method for accurately matching the standard rail profile data and the profile data acquired by the rail inspection vehicle. After the lens distortion correction and the perspective transformation of the measured profile data, we used ICP Algorithm for accurate profile data matching with the reference profile extracted from the standard rail drawing. We constructed the prototype of the Rail Profile Measurement System for High-speed Railway and the experimental result on the three type of the standard rail used in Korea showed the excellent profile matching accuracy within 0.1mm.

• 대한방사선기술학회지:방사선기술과학
• /
• 제20권2호
• /
• pp.28-33
• /
• 1997

For the Evaluation of X-ray image intensifier, we measured radiation dose at input of I. I., brightness and fluorescence at output of I. I. by using X-ray exposure meter, optometer and fluorescence meter for the relative conversion factor. Especially, by using fluorescence meter, we could easily get relative conversion factor without having regulated machine by JIS. Since using, the quality of image intensifier is going down. Consequently, it needs continuous quality maintenance.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2008년도 High Temperature Superconductivity Vol.XVIII
• /
• pp.50-50
• /
• 2008

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2008년도 High Temperature Superconductivity Vol.XVIII
• /
• pp.55-55
• /
• 2008

• 자원리싸이클링
• /
• 제11권5호
• /
• pp.16-20
• /
• 2002

스트론튬 페라이트에 포화자화를 높이기 위하여 Fe이온에 Co를 치환하고, 원소치환에 따른 전하보상차원으로 La를 동시 치환을 실시한 $_{l-x}$ La$Sr_{x}$ /$Fe_{12-x}$ $Co_{x}$ $O_{19}$ 조성에서 치환량 X=0에서 부터 X=0.5까지 0.1씩 변화하여 하소분말을 제조하여 하소분말 특성을 조사하고, 소결조제와 함께 미분쇄한 후 자장중 성형 및 소결하여 스트론튬 페라이트 자석을 제조하여 미세구조와 자기적 특성을 조사하였다. 스트론튬 페라이트에 La-Co 치환량이 증가할수록 하소 후 이방성자장과 하소분말의 보자력을 강하게 증가시키며, 하소후 결정크기가 작아지는 것으로 나타났다. 스트론튬 페라이트 자석은 La-Co의 치환량에 따라 회귀식 $B_{r}$ $≒0.097_{i}$ $H_{c}$ +4500의 함수적 관계를 나타내고 있으며, La-Co를 치환하지 않은 $SrFe_{12}$$O_{19}$ 조성에서 잔류자속밀도는 4090 G, 보자력은 3560 Oe를 나타내었으나, La-Co치환량 0.3인 $Sr_{0.7}$ $La_{0.3}$ $Fe_{11.7}$ $Co_{0.3}$ $O_{19}$ 조성에서 잔류자속밀도는 4080 G, 보자력은 4800 Oe 특성을 나타내었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 춘계학술발표대회 개요집
• /
• pp.100-102
• /
• 1999

• 센서학회지
• /
• 제18권1호
• /
• pp.54-62
• /
• 2009

${Co_3}{O_4}$ and ${Co_3}{O_4}$-based thick films with additives such as ${Co_3}{O_4}-{Fe_2}{O_3}$(5 wt.%), ${Co_3}{O_4}-{SnO_2}$ (5 wt.%), ${Co_3}{O_4}-{WO_3}$(5 wt.%) and ${Co_3}{O_4}$-ZnO(5 wt.%) were fabricated by screen printing method on alumina substrates. Their structural properties were examined by XRD and SEM. The sensitivities to iso-${C_4}H_{10}$, $CH_4$, CO, $NH_3$ and NO gases were investigated with the thick films heat treated at $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$. From the gas sensing properties of the films, the films showed p-type semiconductor behaviors. ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film heat treated at $600^{\circ}C$ showed higher sensitivity to i-${C_4}H_{10}$ and CO gases than other thick-films. ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film heat treated at $600^{\circ}C$ showed the sensitivity of 170 % to 3000 ppm iso-${C_4}H_{10}$ gas and 100 % to 100 ppm CO gas at the working temperature of $250^{\circ}C$. The response time to i-${C_4}H_{10}$ and CO gases showed rise time of about 10 seconds and fall time of about $3{\sim}4$ minutes. The selectivity to i-${C_4}H_{10}$ and CO gases was enhanced in the ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film.